Vinyl. Our way of life since 2004 (877) 929-8729

VPI Dealer Authorized & Certified
Site Search
Menu Free shipping on domestic orders over $49.99! - We ship worldwide!
LP20 - 20% Off Vinyl
Home > Products for: '

Vpi Motor

'
  • 1
  • 2
Results per page:
  • Analog Drive System (ADS) Analog Drive System (ADS) Quick View

    $1,000.00
    Buy Now
    x

    Analog Drive System (ADS)



    The ADS design includes two pure analog frequency generators featuring low distortion and noise; a high current Class-A/B amplifier that is transformer-coupled to the turntable output; analog control logic for low noise operation; 33/45 RPM analog speed adjustment controls with center detent positions that are factory calibrated for 60/81Hz; analog logic controlled run/stop switching with the output RMS voltage @ 120VAC on startup, followed by a step down to 90VAC after an 8-second delay for quick starting of heavy platters.


    Operational features

    The ADS includes a lighted power on/off switch allowing it to remain powered up during listening sessions for the oscillators to remain warmed up for lowest distortion. There is a separate run/stop switch to control the motor operation. The ADS also utilizes separate 60 Hz and 81 Hz oscillators to eliminate unnecessary switching circuitry in the oscillator circuits for long term speed stability and low oscillator distortion. Turntable speed is chosen using a switch located between the 33 RPM and 45 RPM speed adjustment controls; LEDs indicate the Run/Stop condition and chosen speed. Speed adjustment controls provide a center detent position that is factory calibrated to 60 and 81Hz +/- .02 Hz in their center detented position. The controls also provide fine speed adjustment of approximately 3 Hz through continuously variable linear adjustment controls. The circuitry provides a startup voltage of approximately 120VAC for 8 seconds on startup to assist quick speed ramp of heavier platters, then reduces to 92VAC for its steady state run voltage.


    Speed Control and adjustment

    The front panel contains a two-position push-button switch for selecting either 33 RPM or 45 RPM operation. Pressing the switch either latches it in or releases the switch to its outward position for 33 RPM operation. There are separate speed adjustment controls for 33 and 45 RPM. The controls have a detented center position that is factory calibrated for 60 Hz (33 RPM) and 81 Hz (45 RPM). The speed is also continuously adjustable +/- 3 Hz for fine tuning of the platter speed using a stroboscopic disk and 60 HZ light source. Blue LED indicators adjacent to the controls indicate which speed is set at a glance.


    Motor Stop and Run

    The ADS is meant to be left powered on during the listening session. The platter is started and stopped by the front panel Run/Stop momentary push-button switch. There is an LED indicator the glows red when stopped and green when the platter is turning.


    System power

    There is an IEC power module on the rear panel to supply AC power to the ADS. The IEC module contains a fuse drawer that holds a 1-amp slow blow fuse protecting the ADS from electrical system malfunctions.


    AC power to the ADS is controlled by the power switch located on the left-hand side of the front panel. When the ADS is powered up, the indicator in the switch glows blue indicating the internal power supplies are functioning properly.


    Output to Turntable

    The 125 VAC max output to the motor is supplied by the identified AC receptacle on the rear panel. The receptacle output provides a maximum 20 watts. Higher wattage loads will seriously damage the ADS.


    VPI Accessories
    $1,000.00
    Analog Drive System Buy Now
  • Single Motor Flywheel Single Motor Flywheel Quick View

    $1,500.00
    Buy Now
    x

    Single Motor Flywheel



    The HR-X motor/flywheel combination is now available for the Aries, Aries 2, and all TNT turntables. A machined housing, 300 rpm motor, 10 pound flywheel spinning at 500 rpm is included.


    VPI Accessories
    $1,500.00
    Single Motor Flywheel Buy Now
  • VPI Avenger Turntable VPI Avenger Turntable Quick View

    $9,999.99
    Buy Now
    x

    VPI Avenger Turntable


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **Fully Customizable! See Features Tab For Upgrade Options - Please Call Our Audio Advisor To Discuss Upgrades**


    **All Cartridges Installed Free Of Charge**


    The VPI Avenger table was originally a project started by Harry over 12 years ago. In the process of the design the project was dropped in mid-production due to excessive demand by HR-X customers which left the design and proto-type chassis to be mothballed. The good news about the abandoned design is Harry instead shifted his focus into starting and completing the VPI Classic Turntable.


    Shortly after the development of the Prime, and while cleaning out the warehouse in preparation for a dealer training event, the forgotten Avenger and its designs were re-discovered! The working name was the Tri-Pod Project. Being newly motivated, Harry has finally put in motion the table that will be his master piece! The unique iterations that had been crafted from the original process were completed as Special Editions.


    This beautiful table comes standard with the Avenger Chassis and Classic Platter, JMW 10-3D Tonearm, Prime Motor with 2-Step Pulley, Classic Signature Feet and an HR-X Center Weight. Does not include SDS or Periphery Ring Clamp.


    This product is not eligible for further discount.


    VPI Turntables
    $9,999.99
    VPI Avenger
    Buy Now
  • 300 RPM Upgrade Kit for 12 Platter 300 RPM Upgrade Kit for 12 Platter Quick View

    $300.00
    Buy Now
    x

    300 RPM Upgrade Kit for 12 Platter


    300 RPM Upgrade Kit for 12 Platter - Motor and Pulley

    VPI Accessories
    $300.00
    300 RPM Upgrade Kit for 12 Platter Buy Now
  • 600 RPM Replacement Motor 600 RPM Replacement Motor Quick View

    $250.00
    Buy Now
    x

    600 RPM Replacement Motor


    VPI Accessories
    $250.00
    600 RPM Replacement Motor Buy Now
  • VPI Prime Scout Turntable (with 9 Inch 3D Arm) VPI Prime Scout Turntable (with 9 Inch 3D Arm) Quick View

    $2,999.99
    Buy Now
    x

    VPI Prime Scout Turntable (with 9 Inch 3D Arm)



    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    Features:


    • 300 (US) / 500(OS) RPM motor
    • Rounded black motor housing
    • MDF chassis vinyl wrapped with steel plate (black finish)
    • Upgraded 9 Inch 3D Tonearm
    • Standard VTA base
    • Machined aluminum 11-inch diameter platter, 1 1/3 inch thick
    • Delrin clamp - Scout Clamp

    VPI Turntables
    $2,999.99
    VPI Prime Scout Turntable with 9 3D Tonearm - No Cartridge
    Buy Now
  • VPI Avenger Reference Turntable VPI Avenger Reference Turntable Quick View

    $20,999.99
    Buy Now
    x

    VPI Avenger Reference Turntable


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **See Features Tab For Tonearm Upgrade Options - Please Call Our Audio Advisor To Discuss Upgrades**


    **All Cartridges Installed Free Of Charge**


    The VPI Avenger table was originally a project started by Harry over 12 years ago. In the process of the design the project was dropped in mid-production due to excessive demand by HR-X customers which left the design and proto-type chassis to be mothballed. The good news about the abandoned design is Harry instead shifted his focus into starting and completing the VPI Classic Turntable.


    Shortly after the development of the Prime, and while cleaning out the warehouse in preparation for a dealer training event, the forgotten Avenger and its designs were re-discovered! The working name was the Tri-Pod Project. Being newly motivated, Harry has finally put in motion the table that will be his master piece! The unique iterations that had been crafted from the original process were completed as Special Editions.


    This beautiful table comes standard with the Avenger Chassis with Magnetic Drive Platter, JMW 12-3D-R Tonearm, Rim Drive Motor Assembly, Machined Avenger Feet, HR-X Center Weight, ADS and Periphery Ring Clamp.


    This product is not eligible for further discount.


    VPI Turntables
    $20,999.99
    VPI Avenger Reference
    Buy Now
  • 300 RPM Upgrade Kit for 11.5 Platter 300 RPM Upgrade Kit for 11.5 Platter Quick View

    $300.00
    Buy Now
    x

    300 RPM Upgrade Kit for 11.5 Platter


    300 RPM Upgrade Kit for 11.5 Platter - Motor and Pulley

    VPI Accessories
    $300.00
    300 RPM Upgrade Kit for 11.5 Platter Buy Now
  • VPI Prime Scout Turntable VPI Prime Scout Turntable Quick View

    $2,199.00
    Buy Now
    x

    VPI Prime Scout Turntable



    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The Prime Scout features:


    • 300 (US) / 500(OS) RPM motor
    • Rounded black motor housing
    • MDF chassis vinyl wrapped with steel plate (black finish)
    • JMW 9 tonearm (VPI wire)
    • Standard VTA base
    • Machined aluminum 11-inch diameter platter, 1 1/3 inch thick
    • Delrin clamp - Scout Clamp

    VPI Turntables
    $2,199.00
    Scout 2017
    Buy Now
  • VPI Classic Direct Turntable VPI Classic Direct Turntable Quick View

    $30,000.00
    Buy Now
    x

    VPI Classic Direct Turntable

    2013



    In-Home Setup In The Continental U.S. Included!


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The VPI Classic Direct Drive Turntable is the newest turntable in the VPI Classic line. Our design takes advantage of 21st Century motor technology for accurate speed control utilizing a servo motor controller coupled with an active feedback loop to control the motion of the platter. It is a true measure of design and engineering excellence. The Classic Direct Drive Turntable is precision manufactured and painstakingly handmade entirely in the USA. It is simple to set up and is free from any shift in factory settings over time. Some of the VPI Classic Direct Drive Turntable key features are:


    VPI produced a superior design by using fundamentally sound engineering coupled with innovative applications of new technologies. By bringing together a team of engineers and companies with proven track records of engineering achievements we have established a new level of performance in turntables that reach the limits of analog technology. The revolutionary design, the ground breaking direct drive system, the most accurate speed control achieved to date, the outstanding industrial design, the list goes on and on substantiating why the VPI Classic Direct Drive Turntable is the most advanced and technically superior turntable design ever.


    VPI Turntables
    $30,000.00
    Classic Direct Drive Turntable
    Buy Now
  • VPI Prime Signature Turntable VPI Prime Signature Turntable Quick View

    $5,999.00
    Buy Now
    x

    VPI Prime Signature Turntable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    • Avenger motor
    • Steel corner post
    • Classic signature feet
    • 10 inch reference 3D
    • Steel arm board


    By getting out of the way entirely, the VPI Prime simply let the cartridge do its intended job. Most other turntables make this music 'fall' out of the speakers, but with the VPI it just sang! - Alan Sircom, HiFi +


    The past 3 years VPI has been focusing mainly on new/entry level audiophiles and getting them to embrace vinyl for the first time. With the Prime we wanted to get back to our roots and focus on the existing audience with a table that offers quality hi-end sound while taking advantage of our improvements in technology. Also, it was important to show the industry that we will still be making new turntable and designs whether Harry is in the factory or poolside! The Prime is Mat Weisfeld's first solo design on a table with Harry's approval as well as input from the rest of the VPI staff. The shape of the Prime is meant to have a curvier and sexy look compared to the classic look of our tables over the past 10 years. At same time having the footprint to accommodate the space needed for a 10 inch 3D arm.


    VPI Turntables
    $5,999.00
    VPI Prime Signature Turntable - No Cartridge
    Buy Now
  • VPI Prime Turntable (Open Box) VPI Prime Turntable (Open Box) Quick View

    $2,999.00
    Buy Now
    x

    VPI Prime Turntable (Open Box)



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Thinking about upgrading your VPI Turntable? Call our audio advisors to discuss trade-in value.


    All Cartridges Installed Free of Charge


    Open Box


    The VPI Prime gets back to VPI's audiophile roots by focusing on a table that takes advantage of technological improvements to produce a quality high-end sound. The Prime is Mat Weisfeld's first solo design, taking all of VPI's collective experience to create a curvy, sexy new look while at the same time accommodating a 10" 3D arm. And that experience paid off: not only does the footprint work for looks and function, improved technology means a lower price for the 3D arm with the same sound result.


    Even with the new design, some of the classics remain: an outboard 300 RPM motor housing, a classic platter, a VTA tower for vertical tracking on the fly, and a stainless steel Delrin record clamp, all built on top of new Prime feet offering improved isolation.


    The VPI Prime Turntable Features:


    • 10 inch 3D arm

    • VTA Tower for vertical tracking on the fly

    • Metal Platter

    • Outboard 300 RPM motor housing

    • New Prime feet which offer improved isolation

    • Stainless Steel/Delrin record clamp



    Cartridge Not Included.



    Demo Discounts
    $2,999.00
    VPI Prime Turntable (Open Box)
    Buy Now
  • Classic 1 Turntable - Black Classic 1 Turntable - Black Quick View

    $3,299.00
    Buy Now
    x

    Classic 1 Turntable - Black


    Sterophile Golden Golden


    Absolute Absolute ToneAudio


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The VPI Classic 1 turntable comes standard with the unipivot JMW-10.5i tonearm Special Edition in rigid mount mode, new VPI silver coated pure copper wire, a 2.5 thick plinth trimmed with real black oak or real solid walnut finish (at no additional cost), a solid mounted 600 RPM AC synchronous motor, new 2 thick machined aluminum platter, silent inverted bearing, and new isolator feet derived from the HR-X.


    The sound of the Classic 1 turntable is fast, clean, wide open, with deep powerful bass, and unequalled in speed stability. The Classic 1 turntable gives any turntable made regardless of price a serious run for the money.


    This completely new design has produced the simplest and one of the best sounding VPI tables to date.


    VPI Classic Turntable Features:


    Special Edition JMW-10.5i SE tonearm - By giving up vta on the fly adjustments, you get most of the sound of the highly reviewed JMW-10.5i tonearm. A new less expensive base and mounting saves hundreds of dollars but gives up little in sound.


    New 6061 machined aluminum 18 pound high inertia platter with precision inverted bearing and stainless steel damping plate.


    Speed stability on par with a master tape - Due to the rigid mounting of motor - platter - tonearm there is no random motion to cause speed instabilities.


    Noise rejection allowing the Classic 1 turntable to sit on a wood shelf near four 15 subwoofers and having virtually no feedback.


    Lack of random motion between the motor - platter - tonearm gives the ultimate in low level resolution. Not only does this rigidity improve speed stability, it also allows the retrievel of low level information challenging the world's great turntables and master tapes.


    Absolutely solid, non-resonating laminated one-piece chassis holding all components. This is not a wooden frame; it is a solid laminated 2.5 thick MDF block with 11 gauge steel attached to the top with silicone and long bolts through all the layers. The chassis weighs 30 pounds and is totally non-resonant. Now with solid black oak or solid walnut wood finish on all four sides.


    RCA jack termination so you can use the interconnect of your choice.


    Tonearm anti-skate - For those that require the fine adjustment of anti-skate, it is standard on the JMW-10.5i SE.


    Optional lift off full dustcover is available.


    Optional periphery ring clamp.


    Optional SDS power supply.


    Optional XLR conectors.


    VPI Turntables
    $3,299.00
    Classic 1 - Black
    Buy Now
  • Vacuum Motor 230V Vacuum Motor 230V Quick View

    $219.99
    Buy Now
    x

    Vacuum Motor 230V


    For use with the HW 16.5 Record Cleaning Machine.

    VPI Accessories
    $219.99
    Vacuum Motor 230V Buy Now
  • VPI Avenger Plus Turntable VPI Avenger Plus Turntable Quick View

    $14,999.99
    Buy Now
    x

    VPI Avenger Plus Turntable


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    With the creation and introduction of the Avenger and Avenger reference we found there was a large gap between the products in price range. To accommodate those looking for a step up from the Avenger but not ready to take go all in for the Avenger Reference, the Avenger Plus is exactly what it describes. An Avenger "plus" some solid upgrades that make it a step up from the standard Avenger. Using the technically from our behemoth Titan turntable, we have added the Harry Weisfeld Signature Rim Drive motor assembly. With improved engineering to make it easier to use than ever with an adjustable knob to move the rim drive mechanism which is driven by the included Analog Drive System. Additionally the tonearm is getting a step up with the JMW 12-3DR with Nordost Reference wire as well as a periphery ring clamp.


    The VPI Avenger chassis is three layers of bonded acrylic/aluminum/acrylic, with damping material between layers, locked in by 3 isolation steel corner posts, 3 bolts, and the massive bearing assembly. The corner posts which hold the tonearms (up to three will fit) have adjustable machined knobs giving the user the ability to easily raise and lower the height to level the table. Fully adjustable armboards are made from 5/5" 6061 aluminum for rigidity and grounding. The table can mount up to three arms, any manufacture's brand, and any length!


    VPI Turntables
    $14,999.99
    Avenger Plus Turntable
    Buy Now
  • HW-16.5 turntable motor HW-16.5 turntable motor Quick View

    $150.00
    Buy Now
    x

    HW-16.5 turntable motor


    For use with the HW 16.5 Record Cleaning Machine.


    115V and 230V


    VPI Accessories
    $150.00
    HW-16.5 Turntable Motor - 115V and 230V Buy Now
  • Rim Drive Belt Set Rim Drive Belt Set Quick View

    $40.00
    Buy Now
    x

    Rim Drive Belt Set

    VPI


    Complete belt set for the VPI Super Scout Master/HRX/TNT 6 Rim Drive. Contains two small black belts that goes between motor pulleys and one O ring belt that goes around the Rim Drive.


    Worn belts are the largest contributor to turntable speed fluctuations which destroy your soundstage.


    Contains:

    2 Belts

    1 O Ring Belt

    VPI Accessories
    $40.00
    Complete Rim Drive Belt Set Buy Now
  • VPI Aries Turntable VPI Aries Turntable Quick View

    $6,000.00
    Buy Now
    x

    VPI Aries Turntable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The Aries takes the concepts of the HR-X but brings it down to a foot-print/manageable size for the music lover to work with. Being very diverse and customizable, the Aries can come standard with a 10 JMW arm or with a 12 JMW 3D arm, (known as the Aries 3D). Having an outboard motor, the Aries is smooth and quiet and is complimented very well with the 3D tonearm.


    VPI Turntables
    $6,000.00
    Aries Turntable
    Buy Now
  • Vacuum Motor 115V Vacuum Motor 115V Quick View

    $179.99
    Buy Now
    x

    Vacuum Motor 115V


    For use with the HW 16.5 Record Cleaning Machine.

    VPI Accessories
    $179.99
    Vacuum Motor 115V Buy Now
  • HW-17 Vacuum Motor 115V/230V HW-17 Vacuum Motor 115V/230V Quick View

    $180.00
    Buy Now
    x

    HW-17 Vacuum Motor 115V/230V



    For use with the HW-17 Record Cleaning Machine.


    VPI Accessories
    $180.00
    HW-17 Vacuum Motor 115V/230V Buy Now
  • Reversible Turntable Motor Reversible Turntable Motor Quick View

    $150.00
    Buy Now
    x

    Reversible Turntable Motor

    VPI Accessories
    $150.00
    Reversible Turntable Motor Buy Now
  • Aries Belt - Single Motor Flywheel Aries Belt - Single Motor Flywheel Quick View

    $40.00
    Buy Now
    x

    Aries Belt - Single Motor Flywheel

    VPI
    VPI Accessories
    $40.00
    Aries Belt - Single Motor Flywheel Buy Now
  • VPI Prime Scout Special Edition VPI Prime Scout Special Edition Quick View

    $2,999.00
    Buy Now
    x

    VPI Prime Scout Special Edition


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    Prime Scout Special Edition



    • Prime Scout Chassis
    • Prime Platter
    • 300 RPM Prime Scout Motor
    • JMW-10 3D Tonearm
    • VTA On-The-Fly Base


    Demo Discounts
    $2,999.00
    VPI Prime Scout Special Edition
    Buy Now
  • VPI Prime Turntable (Certified Pre-Owned) VPI Prime Turntable (Certified Pre-Owned) Quick View

    $2,899.00
    Buy Now
    x

    VPI Prime Turntable (Certified Pre-Owned)



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Thinking about upgrading your VPI Turntable? Call our audio advisors to discuss trade-in value.


    All Cartridges Installed Free of Charge


    Certified Pre-Owned



    The VPI Prime gets back to VPI's audiophile roots by focusing on a table that takes advantage of technological improvements to produce a quality high-end sound. The Prime is Mat Weisfeld's first solo design, taking all of VPI's collective experience to create a curvy, sexy new look while at the same time accommodating a 10" 3D arm. And that experience paid off: not only does the footprint work for looks and function, improved technology means a lower price for the 3D arm with the same sound result.


    Even with the new design, some of the classics remain: an outboard 300 RPM motor housing, a classic platter, a VTA tower for vertical tracking on the fly, and a stainless steel Delrin record clamp, all built on top of new Prime feet offering improved isolation.


    The VPI Prime Turntable Features:


    • 10 inch 3D arm

    • VTA Tower for vertical tracking on the fly

    • Metal Platter

    • Outboard 300 RPM motor housing

    • New Prime feet which offer improved isolation



    Cartridge Not Included.

    Demo Discounts
    $2,899.00
    VPI Prime Turntable (Certified Pre-Owned) - No Cartridge
    Buy Now
  • 1
  • 2
Go to top