Vinyl. Our way of life since 2004 (877) 929-8729

VPI Dealer Authorized & Certified
Site Search
Menu Free shipping on domestic orders over $49.99! - We ship worldwide!
20% Off Vinyl - LP20
Home > Products for: '

Vpi Classic 3

'
  • 1
Results per page:
  • Zephyr MK/III Cartridge Zephyr MK/III Cartridge Quick View

    $1,499.99
    Buy Now
    x

    Zephyr MK/III Cartridge

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The new Zephyr MK III has achieved what no other cartridge has done since its inception; rapid recognition as a leading force in phono cartridge design and performance.


    The Soundsmith Zephyr MkIII enjoys a great history, starting with the well loved VPI Zephyr original, which evolved into the well known Zephyr MKII. In our effort to bring you even higher definition without increase in cost, we introduce the NEW Zephyr MKIII. It features a newly developed aluminum alloy - the same one we are now using in the Paua MKII, just released. This new metal alloy has unique dualistic properties, providing stiffness in the ranges required as well as damping exactly where its needed - and by the proper amount - in the most critical parts of the sonic spectrum. The result is a cartridge that will slam your Rock and Roll while providing a new level of linearity and clarity for the most complex classical and jazz passages.


    Attached to our new cantilever material is a tiny new super low mass High Profile Contact Line diamond we have developed for the new Zephyr MKIII. This stylus traces more of the groove walls than a standard contact line, but avoids some of the alignment pitfalls that can occur with a high profile contact line design, allowing more azimuth alignment forgiveness than is normally possible with such designs.


    These improvements are paired with technology borrowed from our higher end line; Trickle Down technology from a unique Dynamic Energy Management System (DEMS) developed by Soundsmith that moves the damped energy and propagates it properly within the cartridge body. This is a similar system we employ in the Soundsmith's well received and reviewed high end Sussurro Cartridge.


    The new Zephyr MKIII is capable of truly remarkable separation and sound stage imaging at a level not previously achievable in a modestly priced design. The composite body and unique DEMS design work in tandem to contribute to the Zephyr MkIII's ability to produce high-end performance from a moderately priced cartridge. Be prepared to sit back and realize......you may have never really heard your record collection before.


    The Zephyr MkIII will provide a level of clarity and beauty that will make you take out your record collection and listen to it all over again.


    Phono Cartridge Rebuilding and Stylus Retipping Services Available - Please inquire.

    Sound-Smith
    $1,499.99
    Zephyr MK/III Cartridge Buy Now
  • VPI 3D Tonearm - 10 VPI 3D Tonearm - 10 Quick View

    $1,800.00
    Buy Now
    x

    VPI 3D Tonearm - 10



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    10 3D Printed Tonearm


    The arm looks like a traditional VPI Unipivot arm, except it's made in a 3D printer. The material is basically epoxy, which forms a rigid, lightweight, structure with good insulation properties. Epoxy is non-crystalline which impedes the transfer of vibration, so it's the perfect material for tone arms. The shape of the tone arm shaft also adds rigidity to the structure and further prevents the transmission of surface vibrations. The result is a low resonance lightweight tone arm.


    This tonearm is backwards compatible and will fit on all past and current VPI Turntables.


    JMW 3D compatibility as of 5/16/13:

    Classic 1

    Classic 2

    Classic 3

    Classic 4 (secondary arm only)


    VPI Accessories
    $1,800.00
    3D Tonearm - 10 Buy Now
  • Classic Series Acrylic Dust Cover - VPI Classic, VPI Classic II, VPI Classic III, and VPI Classic Signature Classic Series Acrylic Dust Cover - VPI Classic, VPI Classic II, VPI Classic III, and VPI Classic Signature Quick View

    $299.00
    Buy Now
    x

    Classic Series Acrylic Dust Cover - VPI Classic, VPI Classic II, VPI Classic III, and VPI Classic Signature

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    The Only Dust Cover Authorized By VPI Industries


    In order to protect your investment in a VPI turntable, AudioShield created a product line that supports production VPI turntables.


    This cover supports the VPI Classic, VPI Classic II, VPI Classic III, and VPI Classic Signature turntables.


    This product is 100% made in the United States of America.


    AudioShield warrants this unit against defects in materials and/or workmanship for 90 days from the date of purchase.


    Product Dimensions:

    Width: 20

    Depth: 15

    Height: 6.5


    Turntable not included in purchase.

    AudioShield
    $299.00
    VPI Dust Cover - Plinth Buy Now
  • VPI Classic 4 Turntable - Piano Black VPI Classic 4 Turntable - Piano Black Quick View

    $10,000.00
    Buy Now
    x

    VPI Classic 4 Turntable - Piano Black


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The Classic 4 is a precision measuring device in its own right; as well as telling you what's in your records' grooves, it will also tell you just how competent your setup is. - Roy Gregory


    The Classic 4 is really, chief designer and former co-owner, Harry Weisfeld's table. He didn't design this table for the consumer, he designed it for his own personal us so he could listen to a 12 inch arm on a Classic table (Classic 1-3 do not have the space to properly mount a 12 inch arm.) We presented the table at the 2012 New York Audio Show to make a statement while also announcing the VPI Traveler. It wasn't intended to bring into the VPI line but the positive feedback and interest immediately made it a staple in the production line.


    Identical build as the Classic 3 but with a larger size chassis, plus having a 12 inch arm gives you more stability, lower tracking distortion, and additional low level resolution from your records. Having the additional size gives the listener a chance to mount a second 10 or 12 inch tone arm in the rear. Why would you have two arms? This lets you have both a stereo and mono cartridge set up at the same time.


    The Classic 4 features a ½ thick machined aluminum plinth bonded to a 1/8 steel sub plate with dampening fabric in between. This is then bonded to 2 of MDF creating a plinth which is so massive and well damped it virtually eliminates resonance. The Classic 4 can use either an extended Classic Signature arm or an extended Classic 3D arm.


    The custom nature of this table comes from the numerous options you have. You can mount 1 or 2 tonearms, 10" or 12" arms, any arm made by almost anyone, it is all customizable and affordable.


    This product is not eligible for further discount.


    VPI Turntables
    $10,000.00
    Classic 4
    Buy Now
  • VPI Prime Turntable VPI Prime Turntable Quick View

    $3,999.00
    Buy Now
    x

    VPI Prime Turntable



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Thinking about upgrading your VPI Turntable? Call our audio advisors to discuss trade-in value.


    All Cartridges Installed Free of Charge


    By getting out of the way entirely, the VPI Prime simply let the cartridge do its intended job. Most other turntables make this music 'fall' out of the speakers, but with the VPI it just sang! - Alan Sircom, HiFi +


    The past 3 years VPI has been focusing mainly on new/entry level audiophiles and getting them to embrace vinyl for the first time. With the Prime we wanted to get back to our roots and focus on the existing audience with a table that offers quality hi-end sound while taking advantage of our improvements in technology. Also, it was important to show the industry that we will still be making new turntable and designs whether Harry is in the factory or poolside! The Prime is Mat Weisfeld's first solo design on a table with Harry's approval as well as input from the rest of the VPI staff. The shape of the Prime is meant to have a curvier and sexy look compared to the classic look of our tables over the past 10 years. At same time having the footprint to accommodate the space needed for a 10 inch 3D arm.


    Cartridge Not Included.


    VPI Turntables
    $3,999.00
    VPI Prime Turntable - No Cartridge
    Buy Now
  • VPI Prime Signature Turntable VPI Prime Signature Turntable Quick View

    $5,999.00
    Buy Now
    x

    VPI Prime Signature Turntable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    • Avenger motor
    • Steel corner post
    • Classic signature feet
    • 10 inch reference 3D
    • Steel arm board


    By getting out of the way entirely, the VPI Prime simply let the cartridge do its intended job. Most other turntables make this music 'fall' out of the speakers, but with the VPI it just sang! - Alan Sircom, HiFi +


    The past 3 years VPI has been focusing mainly on new/entry level audiophiles and getting them to embrace vinyl for the first time. With the Prime we wanted to get back to our roots and focus on the existing audience with a table that offers quality hi-end sound while taking advantage of our improvements in technology. Also, it was important to show the industry that we will still be making new turntable and designs whether Harry is in the factory or poolside! The Prime is Mat Weisfeld's first solo design on a table with Harry's approval as well as input from the rest of the VPI staff. The shape of the Prime is meant to have a curvier and sexy look compared to the classic look of our tables over the past 10 years. At same time having the footprint to accommodate the space needed for a 10 inch 3D arm.


    VPI Turntables
    $5,999.00
    VPI Prime Signature Turntable - No Cartridge
    Buy Now
  • VPI Prime Turntable - Walnut VPI Prime Turntable - Walnut Quick View

    $3,999.00
    Buy Now
    x

    VPI Prime Turntable - Walnut



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Thinking about upgrading your VPI Turntable? Call our audio advisors to discuss trade-in value.


    All Cartridges Installed Free of Charge


    By getting out of the way entirely, the VPI Prime simply let the cartridge do its intended job. Most other turntables make this music 'fall' out of the speakers, but with the VPI it just sang! - Alan Sircom, HiFi +


    The past 3 years VPI has been focusing mainly on new/entry level audiophiles and getting them to embrace vinyl for the first time. With the Prime we wanted to get back to our roots and focus on the existing audience with a table that offers quality hi-end sound while taking advantage of our improvements in technology. Also, it was important to show the industry that we will still be making new turntable and designs whether Harry is in the factory or poolside! The Prime is Mat Weisfeld's first solo design on a table with Harry's approval as well as input from the rest of the VPI staff. The shape of the Prime is meant to have a curvier and sexy look compared to the classic look of our tables over the past 10 years. At same time having the footprint to accommodate the space needed for a 10 inch 3D arm.


    Cartridge Not Included.


    VPI Turntables
    $3,999.00
    VPI Prime Turntable - No Cartridge
    Buy Now
  • VPI Prime Turntable (Open Box) VPI Prime Turntable (Open Box) Quick View

    $2,999.00
    Buy Now
    x

    VPI Prime Turntable (Open Box)



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Thinking about upgrading your VPI Turntable? Call our audio advisors to discuss trade-in value.


    All Cartridges Installed Free of Charge


    Open Box


    The VPI Prime gets back to VPI's audiophile roots by focusing on a table that takes advantage of technological improvements to produce a quality high-end sound. The Prime is Mat Weisfeld's first solo design, taking all of VPI's collective experience to create a curvy, sexy new look while at the same time accommodating a 10" 3D arm. And that experience paid off: not only does the footprint work for looks and function, improved technology means a lower price for the 3D arm with the same sound result.


    Even with the new design, some of the classics remain: an outboard 300 RPM motor housing, a classic platter, a VTA tower for vertical tracking on the fly, and a stainless steel Delrin record clamp, all built on top of new Prime feet offering improved isolation.


    The VPI Prime Turntable Features:


    • 10 inch 3D arm

    • VTA Tower for vertical tracking on the fly

    • Metal Platter

    • Outboard 300 RPM motor housing

    • New Prime feet which offer improved isolation

    • Stainless Steel/Delrin record clamp



    Cartridge Not Included.



    Demo Discounts
    $2,999.00
    VPI Prime Turntable (Open Box)
    Buy Now
  • VPI Avenger Turntable (Open Box) VPI Avenger Turntable (Open Box) Quick View

    $7,499.00
    Buy Now
    x

    VPI Avenger Turntable (Open Box)


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Open Box


    **Fully Customizable! See Features Tab For Upgrade Options - Please Call Our Audio Advisor To Discuss Upgrades**


    **All Cartridges Installed Free Of Charge**


    The VPI Avenger table was originally a project started by Harry over 12 years ago. In the process of the design the project was dropped in mid-production due to excessive demand by HR-X customers which left the design and proto-type chassis to be mothballed. The good news about the abandoned design is Harry instead shifted his focus into starting and completing the VPI Classic Turntable.


    Shortly after the development of the Prime, and while cleaning out the warehouse in preparation for a dealer training event, the forgotten Avenger and its designs were re-discovered! The working name was the Tri-Pod Project. Being newly motivated, Harry has finally put in motion the table that will be his master piece! The unique iterations that had been crafted from the original process were completed as Special Editions.


    This beautiful table comes standard with the Avenger Chassis and Classic Platter, JMW 12 3D Tonearm, 300 RPM Motor with 2-Step Pulley, Classic Signature Feet and an HR-X Center Weight. Does not include ADS or Periphery Ring Clamp.


    This product is not eligible for discount.


    Demo Discounts
    $7,499.00
    VPI Avenger - Open Box
    Buy Now
  • Classic Signature Turntable - Walnut Classic Signature Turntable - Walnut Quick View

    $6,000.00
    Buy Now
    x

    Classic Signature Turntable - Walnut



    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    JMW 3D-10, HR-X Pulley Included!


    It is a work of art, Harry Weisfeld's best. Amen! Five Stars.

    - Harry Pearson


    The Classic line pays homage to the great turntables of the past that have been synonymous with state of the art turntable design. The Classic has been the best selling turntable VPI has ever made and is still outselling production. The sales and rave reviews from around the world are based on the glorious sound and the incredible speed stability, speed stability normally associated with $10K plus designs. Our top of the line Classic 3 represents a significant step forward in both performance and aesthetics pushing the envelope as far as we can to deliver the best sounding turntable VPI has ever made.


    The Classic 3 features a ½ thick machined aluminum plinth bonded to a 1/8 steel sub plate, bonded to 2 of MDF creating a plinth which is so massive and well damped it virtually eliminates resonance.


    For the Classic 3 we updated the arm with a new JMW 10 3-D Tonearm, bearing assembly, base mounting, and VPI wiring from cartridge to RCA (or XLR) output jacks.


    New feet were designed for greater stability, better isolation, and a matching look to the larger chassis. To complete the visual aesthetic of this state of the art design, we chose a deep Piano Black finish to perfectly counterpoint the silvery sheen of the top section. Gorgeous and glorious, the Classic 3 is an absolute triumph! Manufacturers who have received there Classic 3 are using adjectives like Gorgeous, Quietest table I've ever heard, How could it be so inexpensive, Speed stability like my digital masters.


    The sound of the Classic 3 Turntable is powerful, airy, shockingly quick, and deathly quiet, with speed stability equal to any turntable in the world at any price.


    VPI Turntables
    $6,000.00
    Classic Signature Walnut
    Buy Now
  • Classic Aluminum Platter And Bearing Classic Aluminum Platter And Bearing Quick View

    $1,000.00
    Buy Now
    x

    Classic Aluminum Platter And Bearing



    Give Your VPI a Facelift and a Performance Boost!  


    VPI owners can now upgrade their older platters to the awesome 2-inch thick Aluminum Platter used on the Classic.  This is a huge upgrade for any VPI turntable and fits every model (except the HR-X).


    Adding the new aluminum/stainless steel platter makes a huge improvement, eliminating noise and improving speed stability.  No ringing, no resonance, just a cool new look and great performance.


    Please let us know which VPI turntable you have, and we will include the correct kit. The platter is identical for all three types, the only difference is the included hardware.



    • The Classic Platter fits most VPI tables without any extra parts or modification

    • Scout Kit includes parts specific to Scout and HW-19 series turntables

    • TNT Kit includes parts specific to all TNT models except HRX (which does not require this upgrade)


    NOTE: Some assembly may be required. 



    VPI Accessories
    $1,000.00
    Classic Platter - Aluminum Buy Now
  • JMW - Classic Signature Arm JMW - Classic Signature Arm Quick View

    $2,599.99
    Buy Now
    x

    JMW - Classic Signature Arm


    For our 30th anniversary VPI had to come up with something really special at just the right price for a world in a recession. The Classic was the answer and the Classic tonearm was the logical choice for it.



    Born from the 10.5i, stretched to fit the Classic chassis, simplified to save on cost, boiled down to the important basics that make for good engineering and good sound.


    The Classic tonearm is so good Hi Fi Plus gave it as part of the Classic package Turntable of the Year!!


    The Classic arm is a full 10.5 long for very low tracking error, solidly mounted to the Classic base, VTA adjustable with a ship captains wheel adjuster, RCA or optional XLR jacks, ultra stable design.


    The Classic arm is fast, clean, stable, very low in distortion, and dynamic like a master tape. When combined with a cartridge of 7-11 grams and a compliance of 11-16 such as the VPI/Dynavector 20X you will be startled by the dynamic range a low level resolution this arm can reproduce.


    Not eligible for discount.

    Portion of proceeds benefit Jonathan Weisfeld Memorial Fund.p>

    VPI Accessories
    $2,599.99
    JMW - Classic Signature Arm Buy Now
  • Classic Signature Turntable - Piano Black Classic Signature Turntable - Piano Black Quick View

    $5,999.00
    Buy Now
    x

    Classic Signature Turntable - Piano Black


    Stereophile
    Stereophile 2011 Golden


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    Periphery Ring Clamp Not Included


    It is a work of art, Harry Weisfeld's best. Amen! Five Stars.

    - Harry Pearson


    The Classic line pays homage to the great turntables of the past that have been synonymous with state of the art turntable design. The Classic has been the best selling turntable VPI has ever made and is still outselling production. The sales and rave reviews from around the world are based on the glorious sound and the incredible speed stability, speed stability normally associated with $10K plus designs. Our top of the line Classic 3 represents a significant step forward in both performance and aesthetics pushing the envelope as far as we can to deliver the best sounding turntable VPI has ever made.


    The Classic 3 features a ½ thick machined aluminum plinth bonded to a 1/8 steel sub plate, bonded to 2 of MDF creating a plinth which is so massive and well damped it virtually eliminates resonance.


    For the Classic 3 we updated the arm with a new JMW 10 3-D Tonearm, bearing assembly, base mounting, and VPI wiring from cartridge to RCA (or XLR) output jacks.


    New feet were designed for greater stability, better isolation, and a matching look to the larger chassis. To complete the visual aesthetic of this state of the art design, we chose a deep Piano Black finish to perfectly counterpoint the silvery sheen of the top section. Gorgeous and glorious, the Classic 3 is an absolute triumph! Manufacturers who have received there Classic 3 are using adjectives like Gorgeous, Quietest table I've ever heard, How could it be so inexpensive, Speed stability like my digital masters.


    The sound of the Classic 3 Turntable is powerful, airy, shockingly quick, and deathly quiet, with speed stability equal to any turntable in the world at any price.


    VPI Turntables
    $5,999.00
    Classic Signature
    Buy Now
  • VPI Prime Signature Turntable (A- Stock) VPI Prime Signature Turntable (A- Stock) Quick View

    $4,499.00
    Buy Now
    x

    VPI Prime Signature Turntable (A- Stock)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    A- Stock


    **All Cartridges Installed Free Of Charge**


    • Avenger motor
    • Steel corner post
    • Classic signature feet
    • 10 inch reference 3D
    • Steel arm board


    By getting out of the way entirely, the VPI Prime simply let the cartridge do its intended job. Most other turntables make this music 'fall' out of the speakers, but with the VPI it just sang! - Alan Sircom, HiFi +


    The past 3 years VPI has been focusing mainly on new/entry level audiophiles and getting them to embrace vinyl for the first time. With the Prime we wanted to get back to our roots and focus on the existing audience with a table that offers quality hi-end sound while taking advantage of our improvements in technology. Also, it was important to show the industry that we will still be making new turntable and designs whether Harry is in the factory or poolside! The Prime is Mat Weisfeld's first solo design on a table with Harry's approval as well as input from the rest of the VPI staff. The shape of the Prime is meant to have a curvier and sexy look compared to the classic look of our tables over the past 10 years. At same time having the footprint to accommodate the space needed for a 10 inch 3D arm.


    Demo Discounts
    $4,499.00
    VPI Prime Signature Turntable (A- Stock) - No Cartridge
    Buy Now
  • VPI Prime Signature Turntable (Certified Pre-Owned) VPI Prime Signature Turntable (Certified Pre-Owned) Quick View

    $3,999.00
    Buy Now
    x

    VPI Prime Signature Turntable (Certified Pre-Owned)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Certified Pre-Owned


    Cartridge Not Included



    • Avenger motor
    • Steel corner post
    • Classic signature feet
    • 10 inch reference 3D
    • Steel arm board


    By getting out of the way entirely, the VPI Prime simply let the cartridge do its intended job. Most other turntables make this music 'fall' out of the speakers, but with the VPI it just sang! - Alan Sircom, HiFi +


    The past 3 years VPI has been focusing mainly on new/entry level audiophiles and getting them to embrace vinyl for the first time. With the Prime we wanted to get back to our roots and focus on the existing audience with a table that offers quality hi-end sound while taking advantage of our improvements in technology. Also, it was important to show the industry that we will still be making new turntable and designs whether Harry is in the factory or poolside! The Prime is Mat Weisfeld's first solo design on a table with Harry's approval as well as input from the rest of the VPI staff. The shape of the Prime is meant to have a curvier and sexy look compared to the classic look of our tables over the past 10 years. At same time having the footprint to accommodate the space needed for a 10 inch 3D arm.


    Demo Discounts
    $3,999.00
    VPI Prime Signature Turntable (No Cartridge) (Certified Pre-Owned)
    Buy Now
  • VPI Tru-Lift Tonearm Lifter (For Player, Scout, & Classic) VPI Tru-Lift Tonearm Lifter (For Player, Scout, & Classic) Quick View

    $259.99
    Buy Now
    x

    VPI Tru-Lift Tonearm Lifter (For Player, Scout, & Classic)

    VPI


    Tru-Lift Automatic Tonearm Lifter for VPI Player, Scout, & Classic


    Stainless steal


    Adjustable height - 1 1/4 to 2 3/4


    Includes 3 interchangeable sleeves for more flexibility in height.

    VPI Accessories
    $259.99
    Automatic Tonearm Lifter Buy Now
  • VPI 3D Tonearm - 12 (With VTA Base) VPI 3D Tonearm - 12 (With VTA Base) Quick View

    $4,200.00
    Buy Now
    x

    VPI 3D Tonearm - 12 (With VTA Base)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    12 3D Printed Tonearm


    The arm looks like a traditional VPI Unipivot arm, except it's made in a 3D printer. The material is basically epoxy, which forms a rigid, lightweight, structure with good insulation properties. Epoxy is non-crystalline which impedes the transfer of vibration, so it's the perfect material for tone arms. The shape of the tone arm shaft also adds rigidity to the structure and further prevents the transmission of surface vibrations. The result is a low resonance lightweight tone arm.


    This tonearm is backwards compatible and will fit on all past and current VPI Turntables.


    JMW 3D compatibility as of 5/16/13:

    Classic 1

    Classic 2

    Classic 3

    Classic 4 (secondary arm only)


    VPI Accessories
    $4,200.00
    3D Complete Tonearm - 12 (With VTA Base) Buy Now
  • VPI 3D Tonearm - 10 (With VTA Base) VPI 3D Tonearm - 10 (With VTA Base) Quick View

    $3,000.00
    Buy Now
    x

    VPI 3D Tonearm - 10 (With VTA Base)



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    10 3D Printed Tonearm with stand


    The arm looks like a traditional VPI Unipivot arm, except it's made in a 3D printer. The material is basically epoxy, which forms a rigid, lightweight, structure with good insulation properties. Epoxy is non-crystalline which impedes the transfer of vibration, so it's the perfect material for tone arms. The shape of the tone arm shaft also adds rigidity to the structure and further prevents the transmission of surface vibrations. The result is a low resonance lightweight tone arm.


    This tonearm is backwards compatible and will fit on all past and current VPI Turntables.


    JMW 3D compatibility as of 5/16/13:

    Classic 1

    Classic 2

    Classic 3

    Classic 4 (secondary arm only)


    VPI Accessories
    $3,000.00
    3D Complete Tonearm - 10 (With VTA Base) Buy Now
  • 1
Go to top