Vinyl. Our way of life since 2004 (877) 929-8729

VPI Dealer Authorized & Certified
Site Search
Menu Free shipping on domestic orders over $49.99! - We ship worldwide!
20% Off Vinyl  - LP20
Home > Products for: '

Vpi Tube

'
  • 1
Results per page:
  • 78 RPM Tube And Tube Holder 78 RPM Tube And Tube Holder Quick View

    $80.00
    Buy Now
    x

    78 RPM Tube And Tube Holder

    VPI


    For 10'' Records


    Upgrade your VPI 16.5 to 78rpm cleaning ability with this simple, cost effective upgrade. Kit includes a 78rpm vacuum tube and tube holder.

    VPI Accessories
    $80.00
    78 RPM Tube And Tube Holder - For 10 Records Buy Now
  • Black Delrin Vacuum Tube Black Delrin Vacuum Tube Quick View

    $70.00
    Buy Now
    x

    Black Delrin Vacuum Tube


    Newest version vacuum tube made from highly durable Delrin plastic and includes a guide slot to precisely align with the vacuum tube tube holder. The Advantage of a Delrin tube is High Stiffness, Low Friction and Excellent Dimensional Stability! 



    Replacement 33 1/3 (12") Black Delrin Vacuum Pickup Tube for the VPI 16.5, 17 & 27 Typhoon record cleaning machines. We recommend buying two so you always have a spare! 



    Advantages of Delrin: 

    • High Stiffness

    • Low Friction

    • Excellent Dimensional Stability



    Tube Dimensions: 

    5 3/16" Length

    5/8" Diameter  



    VPI Accessories
    $70.00
    Black Delrin Vacuum Tube Buy Now
  • HW-16.5 Vacuum Tube Holder With Ring HW-16.5 Vacuum Tube Holder With Ring Quick View

    $34.99
    Buy Now
    x

    HW-16.5 Vacuum Tube Holder With Ring

    VPI


    Vacuum tube holder with ring and guide pin for perfect alignment for the HW-16.5 Record Cleaning machine.

    VPI Accessories
    $34.99
    HW-16.5 Vacuum Tube Holder With Ring Buy Now
  • Vacuum Tube (Velvet) Vacuum Tube (Velvet) Quick View

    $29.99
    Buy Now
    x

    Vacuum Tube (Velvet)

    VPI


    For VPI Record Cleaning Machines 16.5, 17 and 27.

    VPI Accessories
    $29.99
    Vacuum Tube - Velvet Buy Now
  • VPI 299D Integrated Amplifier VPI 299D Integrated Amplifier Quick View

    $3,999.99
    Buy Now
    x

    VPI 299D Integrated Amplifier



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    VPI Collectible - Limited To 100


    Includes 90 Day Warranty For Tubes And 3 Year Warranty For Amplifier


    This amp is so good, I bought one myself! -Seth Frank, Owner of SoundStageDirect©


    Original created Harry Weisfeld long time family friend Steve Leung (VAS) collaborated together to bring back one of their favorites, the Scott 299D integrated amp. The integrated has a phono stage, amplifier, and headphone amp built right in. The Limited Edition has been restricted to 100 so grab this VPI collectible while you can.


    VPI Amplifier
    $3,999.99
    VPI 299D Integrated Amplifier Buy Now
  • Complete 45 RPM Kit (HW-17/27) Complete 45 RPM Kit (HW-17/27) Quick View

    $150.00
    Buy Now
    x

    Complete 45 RPM Kit (HW-17/27)



    For use with 7'' discs.


    Upgrade your VPI 17 or 27 Typhoon vacuum record cleaning machine to 45rpm cleaning ability with this simple, cost effective upgrade. Kit includes a 45 RPM Tube, Clamp, Tube Holder, and 17/27 Brush.

    VPI Accessories
    $150.00
    Complete 45 RPM Kit - For 7 Records Buy Now
  • 45 RPM Tube And Tube Holder 45 RPM Tube And Tube Holder Quick View

    $80.00
    Buy Now
    x

    45 RPM Tube And Tube Holder

    VPI


    For 7'' Records


    Replacement 45rpm vacuum pick-up tube and holder for the VPI 16.5 record cleaning machine.

    VPI Accessories
    $80.00
    45 RPM Tube And Tube Holder - For 7 Records Buy Now
  • HW 16.5 Record Cleaning Machine (With Mo-Fi) HW 16.5 Record Cleaning Machine (With Mo-Fi) Quick View

    $709.99
    Buy Now
    x

    HW 16.5 Record Cleaning Machine (With Mo-Fi)



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The HW-16.5 is the standard in affordable record cleaning machines but neither its build quality nor its cleaning power has been compromised. Its high-torque, 18 RPM turntable motor is more than capable of withstanding the pressure of heavy scrubbing during extended cleaning sessions, and its 35-second cleaning cycle per side makes quick work of even the dirtiest records. Now with self aligning vacuum suction tubes for even more accurate cleaning, the HW-16.5's high-powered vacuum ensures quick, deep cleaning.

     

    The newly designed vacuum pickup tube automatically adjusts to accommodate records of any thickness. The internal fluid collection system is made of stainless steel to prevent corrosion, and the fully enclosed design prevents splashing. In the VPI tradition, all components are extra heavy-duty and professional grade.

    "I have found the HW-16.5 to be an outstanding performer. The record surfaces are microscopically clean and are so pristine they look new!" -- Bert Whyte, Audio Magazine

     

    ****STEROPHILE PRODUCT OF THE YEAR AWARD WINNER****

     

    Clean your records with the HW-16.5 and hear what you've been missing.

     

    Features:

    35 second cleaning cycle (wash/dry) per side

    18 rpm high torque turntable motor

    No liquid touches record label

    Fully enclosed: no splashing, no mess

    Powerful suction (vacuum) ensures quick deep cleaning

    Removes old residue, prevents new build-up

    Fail safe design

    All components extra heavy-duty professional grade

    Safety coated record contacts, easily user replaceable

    Leaves a pristine, dry, static-free record

    Built-in stainless steel water collection system

    New vacuum tube assembly with auto adjustment

    Removes solution from record's surface all at once

     

    Includes:

    Built in dust cover 8oz bottle of VPI cleaning fluid & cleaning brush

     

    Specifications:

    Size: 151/2" x 14 1/4" x 9"

    Weight: 28lbs

    Vacuum motor: 6.5 amps

    Maximum current draw: 7.5 amps 60 Hz/120 Volts

     

    Also Includes:



    • 1 bottle of Mo-Fi Super Record Wash

    • 1 bottle of Mo-Fi Super Deep Cleaner

    • 1 Mo-Fi record cleaning brush (for scrubbing)

    • 50 Mo-Fi inner sleeves



     

     

    1 year manufacturer warranty on motor.

    2 year manufacturer warranty on machine.

     


     


    This product is not eligible for discount.




    VPI Record Cleaners
    $709.99
    HW 16.5 Cleaning Machine With Mo-Fi Buy Now
  • HW-16.5 45 RPM Kit HW-16.5 45 RPM Kit Quick View

    $130.00
    Buy Now
    x

    HW-16.5 45 RPM Kit

    VPI


    Includes:

    45 RPM Tube

    Tube Holder

    Clamp


    For use with the HW 16.5 Record Cleaning Machine.


     

    VPI Accessories
    $130.00
    HW-16.5 45 RPM Kit Buy Now
  • VPI HW 16.5 Record Cleaning Machine VPI HW 16.5 Record Cleaning Machine Quick View

    $649.99
    Buy Now
    x

    VPI HW 16.5 Record Cleaning Machine


    Stereophile
    Absolute Absolute Absolute 2011


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The HW-16.5 is the standard in affordable record cleaning machines but neither its build quality nor its cleaning power has been compromised. Its high-torque, 18 RPM turntable motor is more than capable of withstanding the pressure of heavy scrubbing during extended cleaning sessions, and its 35-second cleaning cycle per side makes quick work of even the dirtiest records. Now with self aligning vacuum suction tubes for even more accurate cleaning, the HW-16.5's high-powered vacuum ensures quick, deep cleaning.


    The newly designed vacuum pickup tube automatically adjusts to accommodate records of any thickness. The internal fluid collection system is made of stainless steel to prevent corrosion, and the fully enclosed design prevents splashing. In the VPI tradition, all components are extra heavy-duty and professional grade.


    I have found the HW-16.5 to be an outstanding performer. The record surfaces are microscopically clean and are so pristine they look new! -- Bert Whyte, Audio Magazine


    ****STEROPHILE PRODUCT OF THE YEAR AWARD WINNER****


    Clean your records with the HW-16.5 and hear what you've been missing.


    Includes:

    Built in dust cover 8oz bottle of VPI cleaning fluid & cleaning brush


    VPI Record Cleaners
    $649.99
    HW 16.5 Cleaning Machine Buy Now
  • White Hose Clamp White Hose Clamp Quick View

    $6.99
    Buy Now
    x

    White Hose Clamp

    VPI


    Replacement white hose clamp for all VPI record cleaner drain tubes is a must for proper operation!


    Is your VPI record cleaner drain tube clamp worn or broken? If so this replacement clamp is just what you need.


    It is extremely important that this clamp be installed and functioning properly when cleaning records. If this clamp is missing or working improperly while cleaning, fluid can be sucked from the waste fluid compartment and be spread all over the inside of your cleaning machine causing great damage to the electrical, wood components and your wallet!

    VPI Accessories
    $6.99
    White Hose Clamp Buy Now
  • Cayin A-50T Tube Integrated Amplifier Cayin A-50T Tube Integrated Amplifier Quick View

    $1,600.00
    Buy Now
    x

    Cayin A-50T Tube Integrated Amplifier

    Stereophile Stereophile



    The Cayin A-50T is the best low-price amp I have ever heard, and it rivals some of the best amps in any price range.

    - Harry Weisfeld, owner of VPI Industries


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    A beautifully-crafted, hand-made tube piece manufactured to deliver the sound of the classic Marantz 8B


    The Cayin Audio A-50T uses four EL34s for Class A/B1 P.P amplification. The craftsmanship is absolutely first-rate, featuring point-to-point wiring, and each unit is hand-initialed by a quality-control inspector. The toroid power transformer and EI audio transformer are specially manufactured for the A-50T with low magnetic leakage, wide frequency response and low impedance. Two 12AX7EHs and two 12AU7s are used in the preamplifier. One very cool feature is the ability to switch between ultralinear and triode by remote control.


    This piece was hand-built with extreme attention to detail, including point-to-point wiring. Point-to-point was the way that amps used to be wired back in the 1950s and '60s when cost was not the primary objective. Nowadays, most everything contains circuit boards instead of this point-to-point wiring, which is much more dependable and better performing. The bottom line is that point-to-point wiring sounds better. It's one of the main reasons why these Cayin pieces sound like the classic tube gear from Marantz and McIntosh. Anymore, products that feature point-to-point wiring cost a fortune, or they feature sub-par workmanship. You simply are not going to find craftsmanship like with this Cayin gear for anywhere close to this price.


    There are output taps for 4 or 8 ohms. This allows you to fine-tune the sound that you desire. Switching is simple, and listening to the differences is a lot of fun. There is a removable cage, included at no extra charge. The cage snaps into place simply, so that you can take it on and off with no problem. Keep it on if you're worried about protecting your tubes, or take it off to show what real, heavy-duty, classic tube gear looks like. Turn off the lights and watch 'em glow.


    Cayin
    $1,600.00
    Cayin A-50T Tube Integrated Amp Buy Now
  • 33 RPM Tube And Tube Holder 33 RPM Tube And Tube Holder Quick View

    $80.00
    Buy Now
    x

    33 RPM Tube And Tube Holder

    VPI


    For 12'' Records


    Replacement 33rpm vacuum pick-up tube and holder for the VPI 16.5 record cleaning machine.

    VPI Accessories
    $80.00
    33 RPM Tube And Tube Holder - For 12 Records Buy Now
  • VPI 3DR Tonearm - 12 VPI 3DR Tonearm - 12 Quick View

    $3,400.00
    Buy Now
    x

    VPI 3DR Tonearm - 12



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The 12 3D Reference tonearm improves upon the standard 3D arm with carbon fiber wrap around the arm tube and upgraded premium Nordost Reference wire. Weight is the same as the standard 12 3D arm.


    VPI Accessories
    $3,400.00
    3DR Tonearm - 12 Buy Now
  • Cayin A-50T Tube Integrated Amplifier (with Phono Stage) Cayin A-50T Tube Integrated Amplifier (with Phono Stage) Quick View

    $1,800.00
    Buy Now
    x

    Cayin A-50T Tube Integrated Amplifier (with Phono Stage)

    Stereophile Stereophile



    The Cayin A-50T is the best low-price amp I have ever heard, and it rivals some of the best amps in any price range.

    - Harry Weisfeld, owner of VPI Industries


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Includes Phono Stage


    A beautifully-crafted, hand-made tube piece manufactured to deliver the sound of the classic Marantz 8B


    The Cayin Audio A-50T uses four EL34s for Class A/B1 P.P amplification. The craftsmanship is absolutely first-rate, featuring point-to-point wiring, and each unit is hand-initialed by a quality-control inspector. The toroid power transformer and EI audio transformer are specially manufactured for the A-50T with low magnetic leakage, wide frequency response and low impedance. Two 12AX7EHs and two 12AU7s are used in the preamplifier. One very cool feature is the ability to switch between ultralinear and triode by remote control.


    This piece was hand-built with extreme attention to detail, including point-to-point wiring. Point-to-point was the way that amps used to be wired back in the 1950s and '60s when cost was not the primary objective. Nowadays, most everything contains circuit boards instead of this point-to-point wiring, which is much more dependable and better performing. The bottom line is that point-to-point wiring sounds better. It's one of the main reasons why these Cayin pieces sound like the classic tube gear from Marantz and McIntosh. Anymore, products that feature point-to-point wiring cost a fortune, or they feature sub-par workmanship. You simply are not going to find craftsmanship like with this Cayin gear for anywhere close to this price.


    There are output taps for 4 or 8 ohms. This allows you to fine-tune the sound that you desire. Switching is simple, and listening to the differences is a lot of fun. There is a removable cage, included at no extra charge. The cage snaps into place simply, so that you can take it on and off with no problem. Keep it on if you're worried about protecting your tubes, or take it off to show what real, heavy-duty, classic tube gear looks like. Turn off the lights and watch 'em glow.


    Cayin
    $1,800.00
    Cayin A-50T Tube Integrated Amp with Phono Stage Buy Now
  • VPI Classic 2 Turntable - Walnut VPI Classic 2 Turntable - Walnut Quick View

    $4,300.00
    Buy Now
    x

    VPI Classic 2 Turntable - Walnut


    Golden Golden Editors Editors


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    "The Classic, in my opinion, exceeds the performance of [VPI's] ScoutMaster series and breaks new sonic ground at a breathtakingly low price. I think this is Weisfeld's best sounding design. If ever there were a best buy in 'tables, this is it!" - Harry Pearson, The Absolute Sound, Golden Ear Award Issue, June/July 2009


    The VPI Classic 2 turntable comes standard with everything on the Classic 1 plus the addition of the micrometer adjusting VTA on the fly base. This is the ideal turntable for music lovers who want to really dial in the proper Stylus Rake Angle for different thickness records and even different cutting stylus angles in the same companies series of records.


    There is no doubt, and especially after long listening tests, the records made in the late 50's and the 70's were cut differently, with different thicknesses of vinyl. For those who want to extract every last drop of information from those amazing grooves and to get the noise level as low as possible correct SRA is required.


    With the Classic 2 you can adjust the SRA/VTA while you are listening, reference the numbers on the record jacket, and the next time you play that favorite record you can dial in your setting exactly. This is serious stuff and really makes for amazing retrievel of low level information. For the died in the wool cartridge swapper you can use multiple arm tubes with the carridges completely setup (VTF, Azimuth, alignment) change cartridges in 30 seconds and dial in the correct height. Think about it, a dedicated mono cartridge, a cartridge for vocals, a classical cartridge, a jazz cartridge, all completely setup and ready to play in 30 seconds.


    The sound of the Classic Turntable is fast, clean, wide open, with deep powerful bass, and unequalled in speed stability. The Classic Turntable gives any turntable made regardless of price a serious run for the money. This completely new design has produced the simplest and one of the best sounding VPI tables to date. VPI Classic Turntable Features: Classic 2 tonearm with VTA on the fly, wired with silver coated pure copper wire, 10.5 long armtube made from aluminum and stainless steel, critically damped in the armtube to keep the arm and wires from vibrating.


    New 6061 machined aluminum 18 pound high inertia platter with precision inverted bearing and stainless steel damping plate. Speed stability on par with a master tape - Due to the rigid mounting of motor - platter - tonearm there is no random motion to cause speed instabilities. Noise rejection allowing the Classic Turntable to sit on a wood shelf near four 15 subwoofers and having virtually no feedback.


    Lack of random motion between the motor - platter - tonearm gives the ultimate in low level resolution. Not only does this rigidity improve speed stability, it also allows the retrievel of low level information challenging the world's great turntables and master tapes. Absolutely solid, non-resonating laminated one-piece chassis holding all comonents. This is not a wooden frame; it is a solid laminated 2.5 thick MDF block with 11 gauge steel attached to the top with silicone and long bolts through all the layers.


    The chassis weighs 30 pounds and is totally non-resonant. Now with solid black oak or solid walnut wood finish on all four sides. RCA jack termination so you can use the interconnect of your choice. Tonearm anti-skate - For those that require the fine adjustment of anti-skate, it is standard on the Classic 2 tonearm.


    VPI Turntables
    $4,300.00
    Classic 2 - Walnut
    Buy Now
  • VPI Classic 3 Turntable - Rosewood - 3D Arm (Now The Classic Signature) VPI Classic 3 Turntable - Rosewood - 3D Arm (Now The Classic Signature) Quick View

    $7,500.00
    Buy Now
    x

    VPI Classic 3 Turntable - Rosewood - 3D Arm (Now The Classic Signature)


    Stereophile 2011 Golden


    Stereophile Best


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    It is a work of art, Harry Weisfeld's best. Amen! Five Stars.

    - Harry Pearson


    The Classic line pays homage to the great turntables of the past that have been synonymous with state of the art turntable design. The Classic has been the best selling turntable VPI has ever made and is still outselling production. The sales and rave reviews from around the world are based on the glorious sound and the incredible speed stability, speed stability normally associated with $10K plus designs. Our top of the line Classic 3 represents a significant step forward in both performance and aesthetics pushing the envelope as far as we can to deliver the best sounding turntable VPI has ever made.


    The Classic 3 features a ½ thick machined aluminum plinth bonded to a 1/8 steel sub plate, bonded to 2 of MDF creating a plinth which is so massive and well damped it virtually eliminates resonance.


    For the Classic 3 we updated the arm with a new stainless steel arm-tube, bearing assembly, base mounting, and Nordost Valhalla wiring from cartridge to RCA (or XLR) output jacks. To maintain the amazing speed stability of the Classic design we include the extremely popular Periphery Ring Clamp and HR-X weight.


    New feet were designed for greater stability, better isolation, and a matching look to the larger chassis. To complete the visual aesthetic of this state of the art design, we chose a deep Piano Black finish to perfectly counterpoint the silvery sheen of the top section. Gorgeous and glorious, the Classic 3 is an absolute triumph! Manufacturers who have received there Classic 3 are using adjectives like Gorgeous, Quietest table I've ever heard, How could it be so inexpensive, Speed stability like my digital masters.


    The sound of the Classic 3 Turntable is powerful, airy, shockingly quick, and deathly quiet, with speed stability equal to any turntable in the world at any price.


    VPI Turntables
    $7,500.00
    Classic 3 - Rosewood
    Buy Now
  • Classic 2 Turntable - Black Oak Classic 2 Turntable - Black Oak Quick View

    $4,300.00
    Buy Now
    x

    Classic 2 Turntable - Black Oak


    Sterophile Golden Golden


    Editors Editors


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The VPI Classic 2 turntable comes standard with everything on the Classic 1 plus the addition of the micrometer adjusting VTA on the fly base. This is the ideal turntable for music lovers who want to really dial in the proper Stylus Rake Angle for different thickness records and even different cutting stylus angles in the same companies series of records.


    There is no doubt, and especially after long listening tests, the records made in the late 50's and the 70's were cut differently, with different thicknesses of vinyl. For those who want to extract every last drop of information from those amazing grooves and to get the noise level as low as possible correct SRA is required.


    With the Classic 2 you can adjust the SRA/VTA while you are listening, reference the numbers on the record jacket, and the next time you play that favorite record you can dial in your setting exactly. This is serious stuff and really makes for amazing retrievel of low level information. For the died in the wool cartridge swapper you can use multiple arm tubes with the carridges completely setup (VTF, Azimuth, alignment) change cartridges in 30 seconds and dial in the correct height. Think about it, a dedicated mono cartridge, a cartridge for vocals, a classical cartridge, a jazz cartridge, all completely setup and ready to play in 30 seconds.


    The sound of the Classic Turntable is fast, clean, wide open, with deep powerful bass, and unequalled in speed stability. The Classic Turntable gives any turntable made regardless of price a serious run for the money. This completely new design has produced the simplest and one of the best sounding VPI tables to date. VPI Classic Turntable Features: Classic 2 tonearm with VTA on the fly, wired with silver coated pure copper wire, 10.5 long armtube made from aluminum and stainless steel, critically damped in the armtube to keep the arm and wires from vibrating.


    New 6061 machined aluminum 18 pound high inertia platter with precision inverted bearing and stainless steel damping plate. Speed stability on par with a master tape - Due to the rigid mounting of motor - platter - tonearm there is no random motion to cause speed instabilities. Noise rejection allowing the Classic Turntable to sit on a wood shelf near four 15 subwoofers and having virtually no feedback.


    Lack of random motion between the motor - platter - tonearm gives the ultimate in low level resolution. Not only does this rigidity improve speed stability, it also allows the retrievel of low level information challenging the world's great turntables and master tapes. Absolutely solid, non-resonating laminated one-piece chassis holding all comonents. This is not a wooden frame; it is a solid laminated 2.5 thick MDF block with 11 gauge steel attached to the top with silicone and long bolts through all the layers.


    The chassis weighs 30 pounds and is totally non-resonant. Now with solid black oak or solid walnut wood finish on all four sides. RCA jack termination so you can use the interconnect of your choice. Tonearm anti-skate - For those that require the fine adjustment of anti-skate, it is standard on the Classic 2 tonearm.



    VPI Turntables
    $4,300.00
    Classic 2 - Black Oak
    Buy Now
  • JMW-12.7 Arm JMW-12.7 Arm Quick View

    $2,999.99
    Buy Now
    x

    JMW-12.7 Arm



    Many audio companies are introducing 12" tonearms. They are 14 years too late! VPI has over a decade of experience designing and building 12" arms and knows what makes them work and what doesn't. The time has come for VPI to incorporate all its knowledge of tonearm construction and produce a state of the art design.

     

    The 12.7 is the end result of a search for a tonearm that meets the following criteria:

     

    A machined tapered arm tube for minimum standing waves in the arm wand and maximum rigidity with low mass.

    Fully adjustable in all parameters to optimize results from any cartridge.

    Totally rigid mounting system that literally becomes part of the turntable chassis.

    Universal cartridge compatibility with stylus resonances in the 9 to 11 HZ range.

    The choice of either XLR or RCA outputs.

    Adjustable fluid damping for optimal cartridge compatibility.

     

    Once these criteria were met, VPI Industries voiced the arm to be as neutral as possible with vanishingly low tracking distortion and the speed and agility expected in a tonearm of this caliber. Made from the finest materials, finished in a beautiful satin aluminum finish, and hand built for quality and consistency, the JMW-12.7 will be your last tonearm.

     

    As all VPI product, the JMW-12.7 is made in the USA.


    This product is not eligible for discount. Portion of proceeds donated to Jonathan Weisfeld Memorial Fund.


    VPI Accessories
    $2,999.99
    JMW - 12.7 Tonearm Buy Now
  • 1
Go to top