Vinyl. Our way of life since 2004 (877) 929-8729

VPI Dealer Authorized & Certified
Site Search
Menu Free shipping on domestic orders over $49.99! - We ship worldwide!
12% Off Vinyl  - LP12
Home > Products for: '

Vpi

'
Results per page:
  • Classic 1 Turntable - Black Oak Classic 1 Turntable - Black Oak Quick View

    $2,499.00
    Buy Now
    x

    Classic 1 Turntable - Black Oak

    VPI


    Sterophile Golden Golden


    Absolute Absolute ToneAudio


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The VPI Classic 1 turntable comes standard with the unipivot JMW-10 tonearm in rigid mount mode, new VPI silver coated pure copper wire, a 2.5 thick plinth trimmed with real black oak or real solid walnut finish (at no additional cost), a solid mounted 600 RPM AC synchronous motor, new 2 thick machined aluminum platter, silent inverted bearing, and new isolator feet derived from the HR-X.


    The sound of the Classic 1 turntable is fast, clean, wide open, with deep powerful bass, and unequalled in speed stability. The Classic 1 turntable gives any turntable made regardless of price a serious run for the money.


    This completely new design has produced the simplest and one of the best sounding VPI tables to date.


    VPI Classic Turntable Features:


    JMW-10 tonearm - By giving up vta on the fly adjustments, you get most of the sound of the highly reviewed JMW-10 tonearm. A new less expensive base and mounting saves hundreds of dollars but gives up little in sound.


    New 6061 machined aluminum 18 pound high inertia platter with precision inverted bearing and stainless steel damping plate.


    Speed stability on par with a master tape - Due to the rigid mounting of motor - platter - tonearm there is no random motion to cause speed instabilities.


    Noise rejection allowing the Classic 1 turntable to sit on a wood shelf near four 15 subwoofers and having virtually no feedback.


    Lack of random motion between the motor - platter - tonearm gives the ultimate in low level resolution. Not only does this rigidity improve speed stability, it also allows the retrievel of low level information challenging the world's great turntables and master tapes.


    Absolutely solid, non-resonating laminated one-piece chassis holding all components. This is not a wooden frame; it is a solid laminated 2.5 thick MDF block with 11 gauge steel attached to the top with silicone and long bolts through all the layers. The chassis weighs 30 pounds and is totally non-resonant. Now with solid black oak or solid walnut wood finish on all four sides.


    RCA jack termination so you can use the interconnect of your choice.


    Tonearm anti-skate - For those that require the fine adjustment of anti-skate, it is standard on the JMW-10.


    Optional lift off full dustcover is available.


    Optional periphery ring clamp.


    Optional SDS power supply.


    Optional XLR conectors.

    VPI Turntables
    $2,499.00
    Classic 1 - Black Oak
    Buy Now
  • VPI Player Turntable VPI Player Turntable Quick View

    $1,500.00
    Buy Now
    x

    VPI Player Turntable



    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Comes Pre-Mounted With An Ortofon 2m Red Cartridge, Phonostage And Headphone Amplifier


    The VPI Player is an all in one high-end entry level turntable. It comes complete with a phonostage, and pre-mounted Ortofon 2M Red cartridge, and a headphone amplifier. It is the perfect solution to enjoying your records! It also has standard RCA connections providing the ability to connect to a standard amplifier and desktop/floor standing speakers. The Player turntable is a precision instrument that has been thoroughly tested to create the musical experience you're looking for! It is also now available in two finished Hard Rock Maple and Mocha Walnut.


    VPI Turntables
    $1,500.00
    Player Turntable
    Buy Now
  • VPI Scout 2017 Turntable VPI Scout 2017 Turntable Quick View

    $2,199.00
    Buy Now
    x

    VPI Scout 2017 Turntable


    VPI
    VPI
    VPI
    VPI

    VPI
    VPI
    VPI
    VPI
    VPI

    VPI
    VPI


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**



    The Scout 2017 Features An Upgraded 300 RPM Motor, A Sleek Curvy Design With Redesigned Feet & Motor Housing


    Rather, this is a flat-out, unconditional, Holy Mother of Crap, I can't believe how good this thing is recommendation. It's hard to imagine another way of spending $****.** that will add this much to your system. - Art Dudley - Sterophile


    "The Scout brought a soundstage that was far more precisely defined. Bass was tighter, with less mud and boom. Treble was more extended and detail retrieval was clearly superior. Music, which was very entertaining and listenable on the *******, simply sounded clear on the scout. Insert your favorite clichÉ about "veil removal" and "inky-black backgrounds," but that's what it sounded like." - Scott Hull TAS


    The SCOUT has become the worlds best-reviewed turntable! The SCOUT is the lowest priced turntable in STEREOPHILE'S Class B and has attained high performance records worldwide.


    Re-introducing the audio world to the best-selling VPI table of all time - better than the old one, better than it should be at this price! The Scout has become one of the world's best-reviewed turntable! The Scout is so simple to set-up, you can have the table up and running in just minutes. The sound is fast and detailed, deep and wide with a natural midrange worthy of the world's finest cartridges.


    VPI Turntables
    $2,199.00
    Scout 2017
    Buy Now
  • VPI Scout 2 Special Edition VPI Scout 2 Special Edition Quick View

    $2,799.00
    Buy Now
    x

    VPI Scout 2 Special Edition


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    Scout 2 - Special Edition


    • Classic Platter
    • Classic Feet
    • JMW 10 Tonearm
    • VTA On-The-Fly Base


    Demo Discounts
    $2,799.00
    Scout 2 - Special Edition
    Buy Now
  • VPI Aries Turntable VPI Aries Turntable Quick View

    $6,000.00
    Buy Now
    x

    VPI Aries Turntable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The Aries takes the concepts of the HR-X but brings it down to a foot-print/manageable size for the music lover to work with. Being very diverse and customizable, the Aries can come standard with a 10 JMW arm or with a 12 JMW 3D arm, (known as the Aries 3D). Having an outboard motor, the Aries is smooth and quiet and is complimented very well with the 3D tonearm.


    VPI Turntables
    $6,000.00
    Aries Turntable
    Buy Now
  • VPI Prime Turntable (Open Box) VPI Prime Turntable (Open Box) Quick View

    $3,199.00
    Buy Now
    x

    VPI Prime Turntable (Open Box)



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Thinking about upgrading your VPI Turntable? Call our audio advisors to discuss trade-in value.


    All Cartridges Installed Free of Charge


    Open Box


    The VPI Prime gets back to VPI's audiophile roots by focusing on a table that takes advantage of technological improvements to produce a quality high-end sound. The Prime is Mat Weisfeld's first solo design, taking all of VPI's collective experience to create a curvy, sexy new look while at the same time accommodating a 10" 3D arm. And that experience paid off: not only does the footprint work for looks and function, improved technology means a lower price for the 3D arm with the same sound result.


    Even with the new design, some of the classics remain: an outboard 300 RPM motor housing, a classic platter, a VTA tower for vertical tracking on the fly, and a stainless steel Delrin record clamp, all built on top of new Prime feet offering improved isolation.


    The VPI Prime Turntable Features:


    • 10 inch 3D arm

    • VTA Tower for vertical tracking on the fly

    • Metal Platter

    • Outboard 300 RPM motor housing

    • New Prime feet which offer improved isolation

    • Stainless Steel/Delrin record clamp



    Cartridge Not Included.



    Demo Discounts
    $3,199.00
    VPI Prime Turntable (Open Box)
    Buy Now
  • Integrated VPI Step Up Transformer - CineMag 1131 Integrated VPI Step Up Transformer - CineMag 1131 Quick View

    $1,650.00
    Buy Now
    x

    Integrated VPI Step Up Transformer - CineMag 1131

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    This fully integrated Step-up Transformer/VPI Interface Box was specifically created to improve the performance of your VPI turntable when used with a low output Moving Coil Phono Cartridge. It replaces the standard VPI Interface Box with a unit that combines the top of the line Bob's Devices exclusive "Blue Series" CineMag 1131 Step Up Transformers with the VPI Interface Box. This unit eliminates a set of interconnects and connectors in the phono playback circuit. The path between the moving coil cartridge and the phono preamplifier is as critical as it is sensitive due to the low voltage and current being transmitted. Further, this path is also subject to RF and other interference. You will hear the difference by streamlining this path - "the fewer stones in the road the smoother the ride."


    This Bob's Devices VPI-SUT replaces the standard VPI interface box on the following arms where the interface box is directly attached to the tonearm base/platform : JMW 12.7, JMW 12.6, JMW 12.5, JMW 9T, JMW 9S, JMW C2, JMW C3, Classic, JMW 10, and JMW 10.5i (and other heritage JMW arms - contact us for specific applications). It will not work where the interface box is mounted directly to the plinth.


    You will, "Hear the Magic!"


    This item is not eligible for discount.

    Bob's Devices
    $1,650.00
    Integrated VPI Step Up Transformer - CineMag 1131 Buy Now
  • VPI HW 16.5 Record Cleaning Machine (With Zerodust) VPI HW 16.5 Record Cleaning Machine (With Zerodust) Quick View

    $699.99
    Buy Now
    x

    VPI HW 16.5 Record Cleaning Machine (With Zerodust)


    Stereophile
    Absolute Absolute Absolute 2011


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Includes Zerodust Stylus Tip Cleaner


    The HW-16.5 is the standard in affordable record cleaning machines but neither its build quality nor its cleaning power has been compromised. Its high-torque, 18 RPM turntable motor is more than capable of withstanding the pressure of heavy scrubbing during extended cleaning sessions, and its 35-second cleaning cycle per side makes quick work of even the dirtiest records. Now with self aligning vacuum suction tubes for even more accurate cleaning, the HW-16.5's high-powered vacuum ensures quick, deep cleaning.


    The newly designed vacuum pickup tube automatically adjusts to accommodate records of any thickness. The internal fluid collection system is made of stainless steel to prevent corrosion, and the fully enclosed design prevents splashing. In the VPI tradition, all components are extra heavy-duty and professional grade.


    I have found the HW-16.5 to be an outstanding performer. The record surfaces are microscopically clean and are so pristine they look new! -- Bert Whyte, Audio Magazine


    ****STEROPHILE PRODUCT OF THE YEAR AWARD WINNER****


    Clean your records with the HW-16.5 and hear what you've been missing.


    Includes:

    Built in dust cover 8oz bottle of VPI cleaning fluid & cleaning brush


    VPI Record Cleaners
    $699.99
    HW 16.5 Cleaning Machine + Zerodust Stylus Tip Cleaner Buy Now
  • Classic Aluminum Platter And Bearing Classic Aluminum Platter And Bearing Quick View

    $1,000.00
    Buy Now
    x

    Classic Aluminum Platter And Bearing



    Give Your VPI a Facelift and a Performance Boost!  


    VPI owners can now upgrade their older platters to the awesome 2-inch thick Aluminum Platter used on the Classic.  This is a huge upgrade for any VPI turntable and fits every model (except the HR-X).


    Adding the new aluminum/stainless steel platter makes a huge improvement, eliminating noise and improving speed stability.  No ringing, no resonance, just a cool new look and great performance.


    Please let us know which VPI turntable you have, and we will include the correct kit. The platter is identical for all three types, the only difference is the included hardware.



    • The Classic Platter fits most VPI tables without any extra parts or modification

    • Scout Kit includes parts specific to Scout and HW-19 series turntables

    • TNT Kit includes parts specific to all TNT models except HRX (which does not require this upgrade)


    NOTE: Some assembly may be required. 



    VPI Accessories
    $1,000.00
    Classic Platter - Aluminum Buy Now
  • VPI Scout 1.1 Turntable VPI Scout 1.1 Turntable Quick View

    $2,199.00
    Buy Now
    x

    VPI Scout 1.1 Turntable



    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The Re-Birth of the Scout!


    Celebrating over 10 years in production! The Scout 1.1 is an upgrade from the previous version, featuring a new aluminum platter.


    Rather, this is a flat-out, unconditional, Holy Mother of Crap, I can't believe how good this thing is recommendation. It's hard to imagine another way of spending $****.** that will add this much to your system. - Art Dudley - Sterophile


    "The scout brought a soundstage that was far more precisely defined. Bass was tighter, with less mud and boom. Treble was more extended and detail retrieval was clearly superior. Music, which was very entertaining and listenable on the *******, simply sounded clear on the scout. Insert your favorite clichÉ about "veil removal" and "inky-black backgrounds," but that's what it sounded like." - Scott Hull TAS


    The SCOUT has become the worlds best-reviewed turntable! The SCOUT is the lowest priced turntable in STEREOPHILE'S Class B and has attained high performance records worldwide.


    The Scout 1.1 Turntable with a new version of the iconic 9" JMW Tonearm and new aluminum platter is a world standard.


    Re-introducing the audio world to the best-selling VPI table of all time - better than the old one, better than it should be at this price! The Scout has become one of the world's best-reviewed turntable! The Scout 1.1 is so simple to set-up, you can have the table up and running in just minutes. The sound is fast and detailed, deep and wide with a natural midrange worthy of the world's finest cartridges.


    The only difference between the 1.1 and 2 is the PLATTER


    Scout 1.1 platter = 1 3/8" thick aluminum and oil bath bearing

    Scout 2 platter = 2" thick aluminum and inverted bearing


    VPI Industries
    $2,199.00
    Scout 1.1 - JMW 9 Tonearm - Aluminium Platter
    Buy Now
  • Classic 1 Turntable - Walnut Classic 1 Turntable - Walnut Quick View

    $3,299.00
    Buy Now
    x

    Classic 1 Turntable - Walnut


    Absolute Absolute ToneAudio Golden Golden


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    "The Classic, in my opinion, exceeds the performance of [VPI's] ScoutMaster series and breaks new sonic ground at a breathtakingly low price. I think this is Weisfeld's best sounding design. If ever there were a best buy in 'tables, this is it!" - Harry Pearson, The Absolute Sound, Golden Ear Award Issue, June/July 2009


    Having been featured in countless Audio Magazines, Cigar Aficionado, television series, and even the Discovery Channel; the Classic is a staple product by VPI Industries. The Classic offers true high-end sound while being esthetically pleasing and reasonably priced for all audiences. Its multi layered rigid design and build quality offers a rich yet highly detailed presentation. It is an easily upgradable table giving the user the ability to grow with their listening experience and pocketbook.


    VPI Industries
    $3,299.00
    Classic 1 - Walnut
    Buy Now
  • Prime Series Acrylic Turntable Tabletop Dust Cover Prime Series Acrylic Turntable Tabletop Dust Cover Quick View

    $349.00
    Buy Now
    x

    Prime Series Acrylic Turntable Tabletop Dust Cover

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    The Only Dust Cover Authorized By VPI Industries


    In order to protect your investment in a VPI turntable, AudioShield created a product line that supports production VPI turntables.


    This product supports the VPI Prime and VPI Prime Signature turntables.


    This product is 100% made in the United States of America.


    AudioShield warrants this unit against defects in materials and/or workmanship for 90 days from the date of purchase.


    Product Dimensions:

    Width: 24

    Depth: 17.25

    Height: 10.25


    Turntable not included in purchase.

    AudioShield
    $349.00
    VPI Dust Cover - Tabletop Buy Now
  • Analog Drive System (ADS) Analog Drive System (ADS) Quick View

    $1,000.00
    Buy Now
    x

    Analog Drive System (ADS)



    The ADS design includes two pure analog frequency generators featuring low distortion and noise; a high current Class-A/B amplifier that is transformer-coupled to the turntable output; analog control logic for low noise operation; 33/45 RPM analog speed adjustment controls with center detent positions that are factory calibrated for 60/81Hz; analog logic controlled run/stop switching with the output RMS voltage @ 120VAC on startup, followed by a step down to 90VAC after an 8-second delay for quick starting of heavy platters.


    Operational features

    The ADS includes a lighted power on/off switch allowing it to remain powered up during listening sessions for the oscillators to remain warmed up for lowest distortion. There is a separate run/stop switch to control the motor operation. The ADS also utilizes separate 60 Hz and 81 Hz oscillators to eliminate unnecessary switching circuitry in the oscillator circuits for long term speed stability and low oscillator distortion. Turntable speed is chosen using a switch located between the 33 RPM and 45 RPM speed adjustment controls; LEDs indicate the Run/Stop condition and chosen speed. Speed adjustment controls provide a center detent position that is factory calibrated to 60 and 81Hz +/- .02 Hz in their center detented position. The controls also provide fine speed adjustment of approximately 3 Hz through continuously variable linear adjustment controls. The circuitry provides a startup voltage of approximately 120VAC for 8 seconds on startup to assist quick speed ramp of heavier platters, then reduces to 92VAC for its steady state run voltage.


    Speed Control and adjustment

    The front panel contains a two-position push-button switch for selecting either 33 RPM or 45 RPM operation. Pressing the switch either latches it in or releases the switch to its outward position for 33 RPM operation. There are separate speed adjustment controls for 33 and 45 RPM. The controls have a detented center position that is factory calibrated for 60 Hz (33 RPM) and 81 Hz (45 RPM). The speed is also continuously adjustable +/- 3 Hz for fine tuning of the platter speed using a stroboscopic disk and 60 HZ light source. Blue LED indicators adjacent to the controls indicate which speed is set at a glance.


    Motor Stop and Run

    The ADS is meant to be left powered on during the listening session. The platter is started and stopped by the front panel Run/Stop momentary push-button switch. There is an LED indicator the glows red when stopped and green when the platter is turning.


    System power

    There is an IEC power module on the rear panel to supply AC power to the ADS. The IEC module contains a fuse drawer that holds a 1-amp slow blow fuse protecting the ADS from electrical system malfunctions.


    AC power to the ADS is controlled by the power switch located on the left-hand side of the front panel. When the ADS is powered up, the indicator in the switch glows blue indicating the internal power supplies are functioning properly.


    Output to Turntable

    The 125 VAC max output to the motor is supplied by the identified AC receptacle on the rear panel. The receptacle output provides a maximum 20 watts. Higher wattage loads will seriously damage the ADS.


    VPI Accessories
    $1,000.00
    Analog Drive System Buy Now
  • VPI Scout 2 With Classic Signature Arm VPI Scout 2 With Classic Signature Arm Quick View

    $4,200.00
    Buy Now
    x

    VPI Scout 2 With Classic Signature Arm


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The Scout 2 features a 1 7/8 thick aluminum platter (with a stainless steel damping plate) in place of the Scout's 1 3/8 acrylic platter.


    The result of mating a great platter to a simple good looking design! In only seven years, the VPI Scout has become the industry standard as the best-reviewed turntable on the planet! For 2009, we saw fit to bring some big improvements to its best-selling turntable. You may recognize the outboard motor and the plinth, but you will do a double take at the exquisite platter and tonearm.


    Every VPI Scout II comes standard with the JMW 9T! This incredible tonearm features a redesigned armtube that is tapered and filled with a proprietary damping material. This revolutionary design greatly reduces internal resonance, yielding a full and rich sound, with a vast soundstage and increased resolution and detail. The added mass also produces deeper bass response and fantastic compatibility with moving coil cartridges.


    For maximum stability and speed accuracy the platter is made from 1 7/8 thick machined 6061 aluminum and is attached to a nonmagnetic 303 stainless steel damping plate. The entire piece weighs in at an impressive 18 pounds! Because the aluminum is grounded to the steel, there is virtually no static buildup or sonic degradation. What's in the grooves is what comes out of your speakers.


    The VPI Scout II's plinth is made from 1 1/8 thick MDF bonded to a 12 gauge steel plate giving a rigid, non-resonant plinth. The massive platter sits on chrome-hardened ball bearing held by a 60 Rockwell-hardened shaft, below which is a black delrin nut.


    The VPI Scout II generates absolutely no additional noise for a pristinely quiet spin. The AC synchronous motor is contained in a separate steel housing and drives the platter via an Aries belt. This combination produces quiet yet stable running with extremely accurate speed. Speeds are 33 and 45 standard, while 78 is optional.


    VPI Turntables
    $4,200.00
    Scout 2 - Classic Signature Arm Buy Now
  • VPI Scoutmaster Turntable VPI Scoutmaster Turntable Quick View

    $3,000.00
    Buy Now
    x

    VPI Scoutmaster Turntable


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    2004 - Hi Fi+ -Product of the Year

    2004 - Stereophile Mag. - Runner-up Analog Product of the Year

    2004 - Positive Feedback Online - Product of the Year


    The Scoutmaster combines key features from several of VPI's most successful turntables. It uses the Classic platter and inverted bearing, a larger version of the steel Scout motor assembly with fused IEC socket and 300-RPM 24 pole motor, and a dual Scout chassis with a steel center. The Scoutmaster comes with the JMW-9 standard or the 10.5i as an option. The table stands 19 by 14 and weighs 48 pounds.


    The Scoutmaster is a Scout with a shot of testosterone for a complete musical experience. The ideal table for someone who wants the best sound but is short on space!!


    VPI Turntables
    $3,000.00
    Scoutmaster
    Buy Now
  • Zephyr MK/III Cartridge Zephyr MK/III Cartridge Quick View

    $1,499.99
    Buy Now
    x

    Zephyr MK/III Cartridge

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The new Zephyr MK III has achieved what no other cartridge has done since its inception; rapid recognition as a leading force in phono cartridge design and performance.


    The Soundsmith Zephyr MkIII enjoys a great history, starting with the well loved VPI Zephyr original, which evolved into the well known Zephyr MKII. In our effort to bring you even higher definition without increase in cost, we introduce the NEW Zephyr MKIII. It features a newly developed aluminum alloy - the same one we are now using in the Paua MKII, just released. This new metal alloy has unique dualistic properties, providing stiffness in the ranges required as well as damping exactly where its needed - and by the proper amount - in the most critical parts of the sonic spectrum. The result is a cartridge that will slam your Rock and Roll while providing a new level of linearity and clarity for the most complex classical and jazz passages.


    Attached to our new cantilever material is a tiny new super low mass High Profile Contact Line diamond we have developed for the new Zephyr MKIII. This stylus traces more of the groove walls than a standard contact line, but avoids some of the alignment pitfalls that can occur with a high profile contact line design, allowing more azimuth alignment forgiveness than is normally possible with such designs.


    These improvements are paired with technology borrowed from our higher end line; Trickle Down technology from a unique Dynamic Energy Management System (DEMS) developed by Soundsmith that moves the damped energy and propagates it properly within the cartridge body. This is a similar system we employ in the Soundsmith's well received and reviewed high end Sussurro Cartridge.


    The new Zephyr MKIII is capable of truly remarkable separation and sound stage imaging at a level not previously achievable in a modestly priced design. The composite body and unique DEMS design work in tandem to contribute to the Zephyr MkIII's ability to produce high-end performance from a moderately priced cartridge. Be prepared to sit back and realize......you may have never really heard your record collection before.


    The Zephyr MkIII will provide a level of clarity and beauty that will make you take out your record collection and listen to it all over again.


    Phono Cartridge Rebuilding and Stylus Retipping Services Available - Please inquire.

    Sound-Smith
    $1,499.99
    Zephyr MK/III Cartridge Buy Now
  • Deluxe Delrin/Stainless Clamp Deluxe Delrin/Stainless Clamp Quick View

    $150.00
    Buy Now
    x

    Deluxe Delrin/Stainless Clamp

    VPI Accessories
    $150.00
    Deluxe Delrin Clamp - Stainless Steel Buy Now
  • JMW - Classic 2 Arm JMW - Classic 2 Arm Quick View

    $2,399.99
    Buy Now
    x

    JMW - Classic 2 Arm


    For our 30th anniversary VPI had to come up with something really special at just the right price for a world in a recession. The Classic was the answer and the Classic tonearm was the logical choice for it.



    Born from the 10.5i, stretched to fit the Classic chassis, simplified to save on cost, boiled down to the important basics that make for good engineering and good sound.


    The Classic tonearm is so good Hi Fi Plus gave it as part of the Classic package Turntable of the Year!!


    The Classic arm is a full 10.5 long for very low tracking error, solidly mounted to the Classic base, VTA adjustable with a ship captains wheel adjuster, RCA or optional XLR jacks, ultra stable design.


    The Classic arm is fast, clean, stable, very low in distortion, and dynamic like a master tape. When combined with a cartridge of 7-11 grams and a compliance of 11-16 such as the VPI/Dynavector 20X you will be startled by the dynamic range a low level resolution this arm can reproduce.


    Not eligible for discount.

    Portion of proceeds benefit Jonathan Weisfeld Memorial Fund.


    VPI Accessories
    $2,399.99
    JMW - Classic 2 Arm Buy Now
  • VPI Classic Direct Turntable VPI Classic Direct Turntable Quick View

    $30,000.00
    Buy Now
    x

    VPI Classic Direct Turntable

    2013



    In-Home Setup In The Continental U.S. Included!


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The VPI Classic Direct Drive Turntable is the newest turntable in the VPI Classic line. Our design takes advantage of 21st Century motor technology for accurate speed control utilizing a servo motor controller coupled with an active feedback loop to control the motion of the platter. It is a true measure of design and engineering excellence. The Classic Direct Drive Turntable is precision manufactured and painstakingly handmade entirely in the USA. It is simple to set up and is free from any shift in factory settings over time. Some of the VPI Classic Direct Drive Turntable key features are:


    VPI produced a superior design by using fundamentally sound engineering coupled with innovative applications of new technologies. By bringing together a team of engineers and companies with proven track records of engineering achievements we have established a new level of performance in turntables that reach the limits of analog technology. The revolutionary design, the ground breaking direct drive system, the most accurate speed control achieved to date, the outstanding industrial design, the list goes on and on substantiating why the VPI Classic Direct Drive Turntable is the most advanced and technically superior turntable design ever.


    VPI Turntables
    $30,000.00
    Classic Direct Drive Turntable
    Buy Now
  • VPI Traveler With Ortofon 2M Red VPI Traveler With Ortofon 2M Red Quick View

    $1,500.00
    Buy Now
    x

    VPI Traveler With Ortofon 2M Red


    VPI VPI VPI VPI



    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Stereophile Magazine's Analog Component of the Year!


    The only entry level high end turntable that is made in America!


    The new entry high end level turntable featuring a new incredibly low friction in the spring loaded sapphire Gimballed bearings! This table was inspired and in memory of Sheila Weisfeld cofounder and owner of VPI Industries for 35 years.



    The Traveler is the culmination of VPI refined engineering and technology providing quality sound and easy usability at a more affordable price.



    I can't imagine a happier way of listening to LPs than with the VPI Traveler. ...The Traveler isn't merely reasonably priced - it's a remarkable bargain, built to last a lifetime. And it's made with love, right here in the US.

    - Stephen Mejias, Stereophile Magazine, November 2012, Vol. 35, No. 11



    Proceeds from the sale of each VPI Traveler sold goes to fight Pancreatic Cancer which tragically took the life of VPI Founder, Sheila Weisfeld.



    VPI Traveler
    $1,500.00
    The Traveler Black + Ortofon 2M Red Buy Now
  • VPI Traveler Turntable - Black VPI Traveler Turntable - Black Quick View

    $1,500.00
    Buy Now
    x

    VPI Traveler Turntable - Black


    VPI VPI VPI VPI



    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Stereophile Magazine's Analog Component of the Year!


    **All Cartridges Installed Free Of Charge**


    The only entry level high end turntable that is made in America!


    The new entry high end level turntable featuring a new incredibly low friction in the spring loaded sapphire Gimballed bearings! This table was inspired and in memory of Sheila Weisfeld cofounder and owner of VPI Industries for 35 years.



    The Traveler is the culmination of VPI refined engineering and technology providing quality sound and easy usability at a more affordable price.



    I can't imagine a happier way of listening to LPs than with the VPI Traveler. ...The Traveler isn't merely reasonably priced - it's a remarkable bargain, built to last a lifetime. And it's made with love, right here in the US.

    - Stephen Mejias, Stereophile Magazine, November 2012, Vol. 35, No. 11



    Proceeds from the sale of each VPI Traveler sold goes to fight Pancreatic Cancer which tragically took the life of VPI Founder, Sheila Weisfeld.



    VPI Traveler
    $1,500.00
    The Traveler Black
    Buy Now
  • HR-X Stainless Steel Center Weight HR-X Stainless Steel Center Weight Quick View

    $150.00
    Buy Now
    x

    HR-X Stainless Steel Center Weight



    This hefty stainless steel weight is the perfect way to improve your favorite record's sound by dampening your LP for increased resolution. It's unthreaded design lets you use it with any turntable!




    VPI Accessories
    $150.00
    HR-X Center Weight - Stainless Steel Buy Now
  • VPI 299D Integrated Amplifier (Open Box) VPI 299D Integrated Amplifier (Open Box) Quick View

    $2,999.99
    Buy Now
    x

    VPI 299D Integrated Amplifier (Open Box)



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Open Box


    VPI Collectible - Limited To 100


    Includes 90 Day Warranty For Tubes And 3 Year Warranty For Amplifier


    This amp is so good, I bought one myself! -Seth Frank, Owner of SoundStageDirect©


    Original created Harry Weisfeld long time family friend Steve Leung (VAS) collaborated together to bring back one of their favorites, the Scott 299D integrated amp. The integrated has a phono stage, amplifier, and headphone amp built right in. The Limited Edition has been restricted to 100 so grab this VPI collectible while you can.


    Demo Discounts
    $2,999.99
    VPI 299D Integrated Amplifier (Open Box) Buy Now
  • Record Cleaning Brush (16.5 and Cyclone) Record Cleaning Brush (16.5 and Cyclone) Quick View

    $50.00
    Buy Now
    x

    Record Cleaning Brush (16.5 and Cyclone)

    VPI


    Replacement record cleaning brush for the VPI 16.5 and Cyclone record cleaning machine.

    VPI Accessories
    $50.00
    Accessories Buy Now
Go to top