Vinyl. Our way of life since 2004 (877) 929-8729

VPI Dealer Authorized & Certified
Site Search
Menu Free shipping on domestic orders over $49.99! - We ship worldwide!
LP20 - 20% Off Vinyl
Home > Products for: '

Used Vpi Turntables

'
  • 1
Results per page:
  • Shinola Runwell Turntable (Limited Edition) (Open Box) Shinola Runwell Turntable (Limited Edition) (Open Box) Quick View

    $1,799.00
    Buy Now
    x

    Shinola Runwell Turntable (Limited Edition) (Open Box)



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Open Box


    Sourced From Manufacturers Across The Globe


    Built At The Shinola Audio Factory In The Flagship Detroit Store


    Shinola's first audio product is The Runwell Turntable, designed inside and out for the discriminating audiophile and easy to use by any music enthusiast. Featuring a built in phono preamplifier and a belt driven pulley with speeds of 33 1/3 rpm and 45rpm.


    Shinola partnered with VPI founder Harry Weisfield and his son Mat Weisfeld (President of VPI), the premier American maker of turntables for 40 years.


    After two years of work, blood, sweat, and tears our collaboration with Shinola has come to light," said Mat Weisfeld, President of VPI Industries. "This has been a labor of love to create an easy to use high end product with the quality and performance of a VPI and with the style and dedication of a Shinola product. The shared value of both companies is love for an American Made product and opportunity for the American worker."




    Demo Discounts
    $1,799.00
    Runwell Turntable - Limited Edition (Open Box) Buy Now
  • VPI Avenger Plus Turntable VPI Avenger Plus Turntable Quick View

    $14,999.99
    Buy Now
    x

    VPI Avenger Plus Turntable


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    With the creation and introduction of the Avenger and Avenger reference we found there was a large gap between the products in price range. To accommodate those looking for a step up from the Avenger but not ready to take go all in for the Avenger Reference, the Avenger Plus is exactly what it describes. An Avenger "plus" some solid upgrades that make it a step up from the standard Avenger. Using the technically from our behemoth Titan turntable, we have added the Harry Weisfeld Signature Rim Drive motor assembly. With improved engineering to make it easier to use than ever with an adjustable knob to move the rim drive mechanism which is driven by the included Analog Drive System. Additionally the tonearm is getting a step up with the JMW 12-3DR with Nordost Reference wire as well as a periphery ring clamp.


    The VPI Avenger chassis is three layers of bonded acrylic/aluminum/acrylic, with damping material between layers, locked in by 3 isolation steel corner posts, 3 bolts, and the massive bearing assembly. The corner posts which hold the tonearms (up to three will fit) have adjustable machined knobs giving the user the ability to easily raise and lower the height to level the table. Fully adjustable armboards are made from 5/5" 6061 aluminum for rigidity and grounding. The table can mount up to three arms, any manufacture's brand, and any length!


    VPI Turntables
    $14,999.99
    Avenger Plus Turntable
    Buy Now
  • VPI Classic Direct Turntable VPI Classic Direct Turntable Quick View

    $30,000.00
    Buy Now
    x

    VPI Classic Direct Turntable

    2013



    In-Home Setup In The Continental U.S. Included!


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The VPI Classic Direct Drive Turntable is the newest turntable in the VPI Classic line. Our design takes advantage of 21st Century motor technology for accurate speed control utilizing a servo motor controller coupled with an active feedback loop to control the motion of the platter. It is a true measure of design and engineering excellence. The Classic Direct Drive Turntable is precision manufactured and painstakingly handmade entirely in the USA. It is simple to set up and is free from any shift in factory settings over time. Some of the VPI Classic Direct Drive Turntable key features are:


    VPI produced a superior design by using fundamentally sound engineering coupled with innovative applications of new technologies. By bringing together a team of engineers and companies with proven track records of engineering achievements we have established a new level of performance in turntables that reach the limits of analog technology. The revolutionary design, the ground breaking direct drive system, the most accurate speed control achieved to date, the outstanding industrial design, the list goes on and on substantiating why the VPI Classic Direct Drive Turntable is the most advanced and technically superior turntable design ever.


    VPI Turntables
    $30,000.00
    Classic Direct Drive Turntable
    Buy Now
  • JMW - Junction Box - RCA JMW - Junction Box - RCA Quick View

    $200.00
    Buy Now
    x

    JMW - Junction Box - RCA



    Replacement Junction Box for VPI Turntables! Allows use with unbalanced RCA inputs of your phono stage. 



    Includes hardware for all tables: 2 Nuts/2 Bolts (Except the VPI Scout, Wood Screws are needed for the Scout Table.) 



    Specifications: 

    Dimensions: 2 1/4" x 1 1/2" x 1 5/8"  



    VPI Accessories
    $200.00
    JMW - RCA Junction Box Buy Now
  • Shinola Runwell Turntable 3 COLORS AVAILABLE Shinola Runwell Turntable Quick View

    $2,500.00
    Buy Now
    x

    Shinola Runwell Turntable



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Sourced From Manufacturers Across The Globe


    Built At The Shinola Audio Factory In The Flagship Detroit Store


    Shinola's first audio product is The Runwell Turntable, designed inside and out for the discriminating audiophile and easy to use by any music enthusiast. Featuring a built in phono preamplifier and a belt driven pulley with speeds of 33 1/3 rpm and 45rpm.


    Shinola partnered with VPI founder Harry Weisfield and his son Mat Weisfeld (President of VPI), the premier American maker of turntables for 40 years.


    After two years of work, blood, sweat, and tears our collaboration with Shinola has come to light," said Mat Weisfeld, President of VPI Industries. "This has been a labor of love to create an easy to use high end product with the quality and performance of a VPI and with the style and dedication of a Shinola product. The shared value of both companies is love for an American Made product and opportunity for the American worker."




    Shinola
    $2,500.00
    Runwell Turntable - 3 Colors Available
    Buy Now
  • HW-16.5 turntable motor HW-16.5 turntable motor Quick View

    $150.00
    Buy Now
    x

    HW-16.5 turntable motor


    For use with the HW 16.5 Record Cleaning Machine.


    115V and 230V


    VPI Accessories
    $150.00
    HW-16.5 Turntable Motor - 115V and 230V Buy Now
  • Classic Signature Turntable - Walnut Classic Signature Turntable - Walnut Quick View

    $6,000.00
    Buy Now
    x

    Classic Signature Turntable - Walnut



    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    JMW 3D-10, HR-X Pulley Included!


    It is a work of art, Harry Weisfeld's best. Amen! Five Stars.

    - Harry Pearson


    The Classic line pays homage to the great turntables of the past that have been synonymous with state of the art turntable design. The Classic has been the best selling turntable VPI has ever made and is still outselling production. The sales and rave reviews from around the world are based on the glorious sound and the incredible speed stability, speed stability normally associated with $10K plus designs. Our top of the line Classic 3 represents a significant step forward in both performance and aesthetics pushing the envelope as far as we can to deliver the best sounding turntable VPI has ever made.


    The Classic 3 features a ½ thick machined aluminum plinth bonded to a 1/8 steel sub plate, bonded to 2 of MDF creating a plinth which is so massive and well damped it virtually eliminates resonance.


    For the Classic 3 we updated the arm with a new JMW 10 3-D Tonearm, bearing assembly, base mounting, and VPI wiring from cartridge to RCA (or XLR) output jacks.


    New feet were designed for greater stability, better isolation, and a matching look to the larger chassis. To complete the visual aesthetic of this state of the art design, we chose a deep Piano Black finish to perfectly counterpoint the silvery sheen of the top section. Gorgeous and glorious, the Classic 3 is an absolute triumph! Manufacturers who have received there Classic 3 are using adjectives like Gorgeous, Quietest table I've ever heard, How could it be so inexpensive, Speed stability like my digital masters.


    The sound of the Classic 3 Turntable is powerful, airy, shockingly quick, and deathly quiet, with speed stability equal to any turntable in the world at any price.


    VPI Turntables
    $6,000.00
    Classic Signature Walnut
    Buy Now
  • VPI Classic 4 Turntable - Piano Black VPI Classic 4 Turntable - Piano Black Quick View

    $10,000.00
    Buy Now
    x

    VPI Classic 4 Turntable - Piano Black


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The Classic 4 is a precision measuring device in its own right; as well as telling you what's in your records' grooves, it will also tell you just how competent your setup is. - Roy Gregory


    The Classic 4 is really, chief designer and former co-owner, Harry Weisfeld's table. He didn't design this table for the consumer, he designed it for his own personal us so he could listen to a 12 inch arm on a Classic table (Classic 1-3 do not have the space to properly mount a 12 inch arm.) We presented the table at the 2012 New York Audio Show to make a statement while also announcing the VPI Traveler. It wasn't intended to bring into the VPI line but the positive feedback and interest immediately made it a staple in the production line.


    Identical build as the Classic 3 but with a larger size chassis, plus having a 12 inch arm gives you more stability, lower tracking distortion, and additional low level resolution from your records. Having the additional size gives the listener a chance to mount a second 10 or 12 inch tone arm in the rear. Why would you have two arms? This lets you have both a stereo and mono cartridge set up at the same time.


    The Classic 4 features a ½ thick machined aluminum plinth bonded to a 1/8 steel sub plate with dampening fabric in between. This is then bonded to 2 of MDF creating a plinth which is so massive and well damped it virtually eliminates resonance. The Classic 4 can use either an extended Classic Signature arm or an extended Classic 3D arm.


    The custom nature of this table comes from the numerous options you have. You can mount 1 or 2 tonearms, 10" or 12" arms, any arm made by almost anyone, it is all customizable and affordable.


    This product is not eligible for further discount.


    VPI Turntables
    $10,000.00
    Classic 4
    Buy Now
  • Classic 1 Turntable - Black Classic 1 Turntable - Black Quick View

    $3,299.00
    Buy Now
    x

    Classic 1 Turntable - Black


    Sterophile Golden Golden


    Absolute Absolute ToneAudio


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The VPI Classic 1 turntable comes standard with the unipivot JMW-10.5i tonearm Special Edition in rigid mount mode, new VPI silver coated pure copper wire, a 2.5 thick plinth trimmed with real black oak or real solid walnut finish (at no additional cost), a solid mounted 600 RPM AC synchronous motor, new 2 thick machined aluminum platter, silent inverted bearing, and new isolator feet derived from the HR-X.


    The sound of the Classic 1 turntable is fast, clean, wide open, with deep powerful bass, and unequalled in speed stability. The Classic 1 turntable gives any turntable made regardless of price a serious run for the money.


    This completely new design has produced the simplest and one of the best sounding VPI tables to date.


    VPI Classic Turntable Features:


    Special Edition JMW-10.5i SE tonearm - By giving up vta on the fly adjustments, you get most of the sound of the highly reviewed JMW-10.5i tonearm. A new less expensive base and mounting saves hundreds of dollars but gives up little in sound.


    New 6061 machined aluminum 18 pound high inertia platter with precision inverted bearing and stainless steel damping plate.


    Speed stability on par with a master tape - Due to the rigid mounting of motor - platter - tonearm there is no random motion to cause speed instabilities.


    Noise rejection allowing the Classic 1 turntable to sit on a wood shelf near four 15 subwoofers and having virtually no feedback.


    Lack of random motion between the motor - platter - tonearm gives the ultimate in low level resolution. Not only does this rigidity improve speed stability, it also allows the retrievel of low level information challenging the world's great turntables and master tapes.


    Absolutely solid, non-resonating laminated one-piece chassis holding all components. This is not a wooden frame; it is a solid laminated 2.5 thick MDF block with 11 gauge steel attached to the top with silicone and long bolts through all the layers. The chassis weighs 30 pounds and is totally non-resonant. Now with solid black oak or solid walnut wood finish on all four sides.


    RCA jack termination so you can use the interconnect of your choice.


    Tonearm anti-skate - For those that require the fine adjustment of anti-skate, it is standard on the JMW-10.5i SE.


    Optional lift off full dustcover is available.


    Optional periphery ring clamp.


    Optional SDS power supply.


    Optional XLR conectors.


    VPI Turntables
    $3,299.00
    Classic 1 - Black
    Buy Now
  • Analog Drive System (ADS) Analog Drive System (ADS) Quick View

    $1,000.00
    Buy Now
    x

    Analog Drive System (ADS)



    The ADS design includes two pure analog frequency generators featuring low distortion and noise; a high current Class-A/B amplifier that is transformer-coupled to the turntable output; analog control logic for low noise operation; 33/45 RPM analog speed adjustment controls with center detent positions that are factory calibrated for 60/81Hz; analog logic controlled run/stop switching with the output RMS voltage @ 120VAC on startup, followed by a step down to 90VAC after an 8-second delay for quick starting of heavy platters.


    Operational features

    The ADS includes a lighted power on/off switch allowing it to remain powered up during listening sessions for the oscillators to remain warmed up for lowest distortion. There is a separate run/stop switch to control the motor operation. The ADS also utilizes separate 60 Hz and 81 Hz oscillators to eliminate unnecessary switching circuitry in the oscillator circuits for long term speed stability and low oscillator distortion. Turntable speed is chosen using a switch located between the 33 RPM and 45 RPM speed adjustment controls; LEDs indicate the Run/Stop condition and chosen speed. Speed adjustment controls provide a center detent position that is factory calibrated to 60 and 81Hz +/- .02 Hz in their center detented position. The controls also provide fine speed adjustment of approximately 3 Hz through continuously variable linear adjustment controls. The circuitry provides a startup voltage of approximately 120VAC for 8 seconds on startup to assist quick speed ramp of heavier platters, then reduces to 92VAC for its steady state run voltage.


    Speed Control and adjustment

    The front panel contains a two-position push-button switch for selecting either 33 RPM or 45 RPM operation. Pressing the switch either latches it in or releases the switch to its outward position for 33 RPM operation. There are separate speed adjustment controls for 33 and 45 RPM. The controls have a detented center position that is factory calibrated for 60 Hz (33 RPM) and 81 Hz (45 RPM). The speed is also continuously adjustable +/- 3 Hz for fine tuning of the platter speed using a stroboscopic disk and 60 HZ light source. Blue LED indicators adjacent to the controls indicate which speed is set at a glance.


    Motor Stop and Run

    The ADS is meant to be left powered on during the listening session. The platter is started and stopped by the front panel Run/Stop momentary push-button switch. There is an LED indicator the glows red when stopped and green when the platter is turning.


    System power

    There is an IEC power module on the rear panel to supply AC power to the ADS. The IEC module contains a fuse drawer that holds a 1-amp slow blow fuse protecting the ADS from electrical system malfunctions.


    AC power to the ADS is controlled by the power switch located on the left-hand side of the front panel. When the ADS is powered up, the indicator in the switch glows blue indicating the internal power supplies are functioning properly.


    Output to Turntable

    The 125 VAC max output to the motor is supplied by the identified AC receptacle on the rear panel. The receptacle output provides a maximum 20 watts. Higher wattage loads will seriously damage the ADS.


    VPI Accessories
    $1,000.00
    Analog Drive System Buy Now
  • VPI Scout Jr Turntable Package - Ortofon 2M Blue & Cable VPI Scout Jr Turntable Package - Ortofon 2M Blue & Cable Quick View

    $2,050.00
    Buy Now
    x

    VPI Scout Jr Turntable Package - Ortofon 2M Blue & Cable



    Ready To Use Out Of The Box!


    The VPI Scout Jr. is a ready to use out of the box high-end entry level turntable. Complete with a pre-mounted Ortofon 2M Red cartridge on a 9 inch Gimballed/Yoke bearing, it is the perfect solution to enjoying your music! The Scout Jr. turntable is a precision instrument thoroughly tested.


    About The Ortofon Cable:

    High Purity (6N) Copper Cable, RCA-to-RCA

    The low signals from the cartridge are very sensitive to electromagnetic induced noise from the outside world. Things like mobile phones and home appliances challenge the tonearm cable. With this focus, Ortofon engineers have made a cable comprised of 7 cores 5N/6N OFC with a tight shield surrounding the cores for optimum shielding against electrical radiated noise. The 6NX TSW-1010 R (RCA to RCA) is the ideal solution for connecting the MC Transformer and Phono pre-amplifier.


    VPI Turntables
    $2,050.00
    Scout Jr + Ortofon 2M Blue + Ortofon Cable Buy Now
  • Integrated VPI Step Up Transformer - CineMag 1131 Integrated VPI Step Up Transformer - CineMag 1131 Quick View

    $1,650.00
    Buy Now
    x

    Integrated VPI Step Up Transformer - CineMag 1131

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    This fully integrated Step-up Transformer/VPI Interface Box was specifically created to improve the performance of your VPI turntable when used with a low output Moving Coil Phono Cartridge. It replaces the standard VPI Interface Box with a unit that combines the top of the line Bob's Devices exclusive "Blue Series" CineMag 1131 Step Up Transformers with the VPI Interface Box. This unit eliminates a set of interconnects and connectors in the phono playback circuit. The path between the moving coil cartridge and the phono preamplifier is as critical as it is sensitive due to the low voltage and current being transmitted. Further, this path is also subject to RF and other interference. You will hear the difference by streamlining this path - "the fewer stones in the road the smoother the ride."


    This Bob's Devices VPI-SUT replaces the standard VPI interface box on the following arms where the interface box is directly attached to the tonearm base/platform : JMW 12.7, JMW 12.6, JMW 12.5, JMW 9T, JMW 9S, JMW C2, JMW C3, Classic, JMW 10, and JMW 10.5i (and other heritage JMW arms - contact us for specific applications). It will not work where the interface box is mounted directly to the plinth.


    You will, "Hear the Magic!"


    This item is not eligible for discount.

    Bob's Devices
    $1,650.00
    Integrated VPI Step Up Transformer - CineMag 1131 Buy Now
  • Classic Aluminum Platter And Bearing Classic Aluminum Platter And Bearing Quick View

    $1,000.00
    Buy Now
    x

    Classic Aluminum Platter And Bearing



    Give Your VPI a Facelift and a Performance Boost!  


    VPI owners can now upgrade their older platters to the awesome 2-inch thick Aluminum Platter used on the Classic.  This is a huge upgrade for any VPI turntable and fits every model (except the HR-X).


    Adding the new aluminum/stainless steel platter makes a huge improvement, eliminating noise and improving speed stability.  No ringing, no resonance, just a cool new look and great performance.


    Please let us know which VPI turntable you have, and we will include the correct kit. The platter is identical for all three types, the only difference is the included hardware.



    • The Classic Platter fits most VPI tables without any extra parts or modification

    • Scout Kit includes parts specific to Scout and HW-19 series turntables

    • TNT Kit includes parts specific to all TNT models except HRX (which does not require this upgrade)


    NOTE: Some assembly may be required. 



    VPI Accessories
    $1,000.00
    Classic Platter - Aluminum Buy Now
  • VPI Scout Jr Turntable Package - Ortofon Cable VPI Scout Jr Turntable Package - Ortofon Cable Quick View

    $1,814.00
    Buy Now
    x

    VPI Scout Jr Turntable Package - Ortofon Cable



    Ready To Use Out Of The Box!


    Comes Pre-Mounted With An Ortofon 2M Red Cartridge


    The VPI Scout Jr. is a ready to use out of the box high-end entry level turntable. Complete with a pre-mounted Ortofon 2M Red cartridge on a 9 inch Gimballed/Yoke bearing, it is the perfect solution to enjoying your music! The Scout Jr. turntable is a precision instrument thoroughly tested.


    About The Ortofon Cable:

    High Purity (6N) Copper Cable, RCA-to-RCA


    The low signals from the cartridge are very sensitive to electromagnetic induced noise from the outside world. Things like mobile phones and home appliances challenge the tonearm cable. With this focus, Ortofon engineers have made a cable comprised of 7 cores 5N/6N OFC with a tight shield surrounding the cores for optimum shielding against electrical radiated noise. The 6NX TSW-1010 R (RCA to RCA) is the ideal solution for connecting the MC Transformer and Phono pre-amplifier.


    VPI Turntables
    $1,814.00
    Scout Jr + Ortofon 2M Red + Ortofon Cable Buy Now
  • Shinola Runwell Turntable (Limited Edition) Shinola Runwell Turntable (Limited Edition) Quick View

    $2,500.00
    Buy Now
    x

    Shinola Runwell Turntable (Limited Edition)



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Limited Edition Of 500 Units


    Sourced From Manufacturers Across The Globe


    Built At The Shinola Audio Factory In The Flagship Detroit Store


    Shinola's first audio product is The Runwell Turntable, designed inside and out for the discriminating audiophile and easy to use by any music enthusiast. Featuring a built in phono preamplifier and a belt driven pulley with speeds of 33 1/3 rpm and 45rpm.


    Shinola partnered with VPI founder Harry Weisfield and his son Mat Weisfeld (President of VPI), the premier American maker of turntables for 40 years.


    After two years of work, blood, sweat, and tears our collaboration with Shinola has come to light," said Mat Weisfeld, President of VPI Industries. "This has been a labor of love to create an easy to use high end product with the quality and performance of a VPI and with the style and dedication of a Shinola product. The shared value of both companies is love for an American Made product and opportunity for the American worker."




    Shinola
    $2,500.00
    Runwell Turntable -Limited Edition Buy Now
  • Classic Signature Turntable - Piano Black Classic Signature Turntable - Piano Black Quick View

    $5,999.00
    Buy Now
    x

    Classic Signature Turntable - Piano Black


    Stereophile
    Stereophile 2011 Golden


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    Periphery Ring Clamp Not Included


    It is a work of art, Harry Weisfeld's best. Amen! Five Stars.

    - Harry Pearson


    The Classic line pays homage to the great turntables of the past that have been synonymous with state of the art turntable design. The Classic has been the best selling turntable VPI has ever made and is still outselling production. The sales and rave reviews from around the world are based on the glorious sound and the incredible speed stability, speed stability normally associated with $10K plus designs. Our top of the line Classic 3 represents a significant step forward in both performance and aesthetics pushing the envelope as far as we can to deliver the best sounding turntable VPI has ever made.


    The Classic 3 features a ½ thick machined aluminum plinth bonded to a 1/8 steel sub plate, bonded to 2 of MDF creating a plinth which is so massive and well damped it virtually eliminates resonance.


    For the Classic 3 we updated the arm with a new JMW 10 3-D Tonearm, bearing assembly, base mounting, and VPI wiring from cartridge to RCA (or XLR) output jacks.


    New feet were designed for greater stability, better isolation, and a matching look to the larger chassis. To complete the visual aesthetic of this state of the art design, we chose a deep Piano Black finish to perfectly counterpoint the silvery sheen of the top section. Gorgeous and glorious, the Classic 3 is an absolute triumph! Manufacturers who have received there Classic 3 are using adjectives like Gorgeous, Quietest table I've ever heard, How could it be so inexpensive, Speed stability like my digital masters.


    The sound of the Classic 3 Turntable is powerful, airy, shockingly quick, and deathly quiet, with speed stability equal to any turntable in the world at any price.


    VPI Turntables
    $5,999.00
    Classic Signature
    Buy Now
  • 21st Century Vinyl: Michael Fremer's Practical Guide to Turntable Set-Up 21st Century Vinyl: Michael Fremer's Practical Guide to Turntable Set-Up Quick View

    $29.99
    Buy Now
    x

    21st Century Vinyl: Michael Fremer's Practical Guide to Turntable Set-Up

    Stereophile magazine senior contributing editor and analog expert Michael Fremer presents his almost three hour long Practical Guide to Turntable Set-Up. Fremer sets up three popular turntables from Pro-Ject, Rega and VPI. Using the hands-on phono cartridge installation techniques, tips and basic principles demonstrated with close-ups and flash animation, any turntable from the popular Technics SL-1200 to the most esoteric can be set up to perfection. Also included: an interview with famed Sterling Sound mastering engineer George Marino, and a 20 page PDF file embedded in the disc's DVD-ROM section that includes even more detailed technical descriptions and an article on record cleaning no vinyl fan should be without. Despite the seemingly dry subject matter, the disc is entertaining. There are even some laughs as Fremer once did stand up comedy (he played legendary Max's Kansas City and even opened for bands like Television and The Jam).


    Michael Fremer
    $29.99
    DVD-Sealed Buy Now
  • Classic Signature Turntable - Walnut (Open Box) Classic Signature Turntable - Walnut (Open Box) Quick View

    $4,999.00
    Buy Now
    x

    Classic Signature Turntable - Walnut (Open Box)



    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    Open Box


    JMW 3D-10, HR-X Pulley Included!


    It is a work of art, Harry Weisfeld's best. Amen! Five Stars.

    - Harry Pearson


    The Classic line pays homage to the great turntables of the past that have been synonymous with state of the art turntable design. The Classic has been the best selling turntable VPI has ever made and is still outselling production. The sales and rave reviews from around the world are based on the glorious sound and the incredible speed stability, speed stability normally associated with $10K plus designs. Our top of the line Classic 3 represents a significant step forward in both performance and aesthetics pushing the envelope as far as we can to deliver the best sounding turntable VPI has ever made.


    The Classic 3 features a ½ thick machined aluminum plinth bonded to a 1/8 steel sub plate, bonded to 2 of MDF creating a plinth which is so massive and well damped it virtually eliminates resonance.


    For the Classic 3 we updated the arm with a new JMW 10 3-D Tonearm, bearing assembly, base mounting, and VPI wiring from cartridge to RCA (or XLR) output jacks.


    New feet were designed for greater stability, better isolation, and a matching look to the larger chassis. To complete the visual aesthetic of this state of the art design, we chose a deep Piano Black finish to perfectly counterpoint the silvery sheen of the top section. Gorgeous and glorious, the Classic 3 is an absolute triumph! Manufacturers who have received there Classic 3 are using adjectives like Gorgeous, Quietest table I've ever heard, How could it be so inexpensive, Speed stability like my digital masters.


    The sound of the Classic 3 Turntable is powerful, airy, shockingly quick, and deathly quiet, with speed stability equal to any turntable in the world at any price.


    Demo Discounts
    $4,999.00
    Classic Signature Walnut - Open Box
    Buy Now
  • JMW - Junction Box - RCA (Valhalla) JMW - Junction Box - RCA (Valhalla) Quick View

    $300.00
    Buy Now
    x

    JMW - Junction Box - RCA (Valhalla)









    Replacement Junction Box with Valhalla Wiring for VPI Turntables! Allows use with unbalanced RCA inputs of your phono stage. 



    Includes hardware for all tables: 2 Nuts/2 Bolts (Except the VPI Scout, Wood Screws are needed for the Scout Table.) 



    Specifications: 

    Dimensions: 2 1/4" x 1 1/2" x 1 5/8"





     



    VPI Accessories
    $300.00
    JMW - RCA Junction Box (Valhalla) Buy Now
  • Crosscheck Level Crosscheck Level Quick View

    $10.00
    Buy Now
    x

    Crosscheck Level

    VPI


    Leveling a turntable is essential to ensure proper performance. The platter's constant speed, cartridge's tracking ability and the tonearm's smooth motion can all be affected if the turntable isn't level.


    VPI's Crosscheck Turntable Level is an effective, easy to use level, perfect for turntables. The Crosscheck Level allows two axis to be checked simultaneously, making leveling a quick and simple task. The Crosscheck Level's small form factor allows quick measurements to be taken anywhere; on the platter, on the plinth, even on the shelf itself.

    VPI Accessories
    $10.00
    Crosscheck Level Buy Now
  • HR-X Mini Feet HR-X Mini Feet Quick View

    $500.00
    Buy Now
    x

    HR-X Mini Feet



    A Huge Upgrade for Scout and Aries Series Tables!


    Upgrade the original coned feet on any Scout, Scoutmaster, Super Scoutmaster and Aries Series turntables ever made with the new VPI Mini HR-X Replacement Feet! These heavier and more stable composite HR-X Style Feet provide greater stability, vibration control and better sound.


    This is one of the best, most affordable and easiest to install upgrades VPI has ever made. Just unscrew your existing coned feet and screw in your new VPI Mini HR-X Feet to take your turntable one step closer in sound to VPI's flagship model the VPI HR-X!


    The VPI Mini HR-X Feet fit almost exactly inside the dimensions of your Scout, Scoutmaster, Super Scoutmaster or Aries Plinths which means no incompatibility with dustcovers and the like!


    The VPI Mini HR-X Feet are quite heavy (almost 1 pound per foot), well isolated and have a very stable 2 1/2' diameter footprint! They are made of a composite of Delrin and Stainless Steel similar the plinth of the highly acclaimed VPI HR-X. They also have a damping mechanism integrated into the design as well. The bottom of the feet have 3 steel ball bearings that are the contact point with your stand to further minimize vibration. The result of all these design features is a lower noise floor, tighter bass and improved overall clarity and soundstage for your VPI turntable.


    Easy to use and install! Just unscrew the existing coned feet beneath your plinth and replace them with the VPI Mini HR-X Feet!


    VPI Accessories
    $500.00
    HR-X Mini Feet Buy Now
  • Periphery Ring Clamp Periphery Ring Clamp Quick View

    $1,000.00
    Buy Now
    x

    Periphery Ring Clamp


    The Periphery Ring Clamp greatly improves the performance of VPI turntables by flattening the outer edges of LPs, increasing the cartridge's tracking ability, removing resonance and aiding detail retrieval. A massive ring designed to sit just outside the lead-in groove, the Periphery Ring Clamp's weight flattens the record onto the platter, eliminating edge warps and more completely coupling the record to the platter.


    Scout, Aries 1 & 2, HW-19 & older TNT owners will need to purchase the HRX platter and bearing in order to use the Periphery Ring Clamp. Due to bearing height differences between the VPI models, please give us a call if you'd like to upgrade these components and we'll help you get the right bearing for your turntable.



    VPI Accessories
    $1,000.00
    Periphery Ring Clamp Buy Now
  • Standard Black Delrin Clamp Standard Black Delrin Clamp Quick View

    $100.00
    Buy Now
    x

    Standard Black Delrin Clamp



    Standard equipment on VPI's Scout series turntables, the Standard Delrin Clamp does an excellent job of reducing the effects of external vibration from interacting with the stylus. This improves focus and pacing, adding weight and power to the sonic presentation.


    Using the Standard Delrin Clamp, can also help reduce (and in some cases eliminate) record warpage and create a much tighter seal between the record and the turntable platter. The clamp essentially locks the record to the platter, reducing vibration typically picked up by the cartridge that colors the sound.


    VPI Accessories
    $100.00
    Delrin Clamp - Standard Black Buy Now
  • HR-X Stainless Steel Center Weight HR-X Stainless Steel Center Weight Quick View

    $150.00
    Buy Now
    x

    HR-X Stainless Steel Center Weight



    This hefty stainless steel weight is the perfect way to improve your favorite record's sound by dampening your LP for increased resolution. It's unthreaded design lets you use it with any turntable!




    VPI Accessories
    $150.00
    HR-X Center Weight - Stainless Steel Buy Now
  • 1
Go to top