Vinyl. Our way of life since 2004 (877) 929-8729

VPI Dealer Authorized & Certified
Site Search
Menu Free shipping on domestic orders over $49.99! - We ship worldwide!
LP20 - 20% Off Vinyl
Home > Products for: '

Turntable Clamp

'
  • 1
Results per page:
  • KAB Super Record Grip - Push On Record Clamp (On Sale) KAB Super Record Grip - Push On Record Clamp (On Sale) Quick View

    $38.00
    Buy Now
    x

    KAB Super Record Grip - Push On Record Clamp (On Sale)

    The newly redesigned KAB super record grip was designed to replace and improve upon the PIG clamp originally supplied with the Revolver brand turntables. This new design features a 2 piece precision molded frame, spring rubber insert and UHMW polyethylene non marring contact surface. This is especially useful on Rega brand turntables and others where there is very little spindle to grab on to.


    The KAB Super Record Grip reduces resonance and acoustic vibration of the record itself, freeing the stylus to do its intended job of tracing the groove. The result is better focus and detail to the soundstage.


    The Super record grip attaches quickly; by turning with slight pressure, it walks down the spindle and meets the record surface.


    Note: For easier use, the center hole can be lubricated with a diluted solution of 5% Armor All® and alcohol, swabbed with Qtip®.


    The built-in bubble level shows turntable level at a glance to within 1 degree of accuracy.


    Spring reinforced rubber insert holds onto the turntable spindle firmly.


    The built in bubble level allows a quick check of turntable level. A level turntable balances the forces of the needle in the groove.


    When the needle is resting in the record groove, the entire record surface behaves as a microphone picking up vibrations from the air and the turntable below. Damping the record surface reduces the affect of these added vibrations to the needle's already difficult job of reading the groove.


    The really great features to take note of with the KAB super record grip is the ease of use and cost effectiveness.


    The super record grip represents great value. Yet it is quite good at what it does and even has the added benefit of showing level at a glance, each time you use it. Keeping with the KAB philosophy that more is better, but it needn't cost more!


    One issue to be sensitive to is turntables with light floating spring suspensions. You will have to push down some while applying the super record grip. It does not rely on weight. (It only weighs 2 Oz) Be sure your turntable can Bottom Out safely. If this is a concern, consult your turntable maker first.


    [In our opinion, if you can bottom out safely, the super grip is a better solution still over clamps that rely on weight, since they will change the operating height of your platter.]

    KAB Electro-Acoustics
    $38.00
    Record Clamp Buy Now
  • VPI Avenger Turntable (Open Box) VPI Avenger Turntable (Open Box) Quick View

    $7,499.00
    Buy Now
    x

    VPI Avenger Turntable (Open Box)


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Open Box


    **Fully Customizable! See Features Tab For Upgrade Options - Please Call Our Audio Advisor To Discuss Upgrades**


    **All Cartridges Installed Free Of Charge**


    The VPI Avenger table was originally a project started by Harry over 12 years ago. In the process of the design the project was dropped in mid-production due to excessive demand by HR-X customers which left the design and proto-type chassis to be mothballed. The good news about the abandoned design is Harry instead shifted his focus into starting and completing the VPI Classic Turntable.


    Shortly after the development of the Prime, and while cleaning out the warehouse in preparation for a dealer training event, the forgotten Avenger and its designs were re-discovered! The working name was the Tri-Pod Project. Being newly motivated, Harry has finally put in motion the table that will be his master piece! The unique iterations that had been crafted from the original process were completed as Special Editions.


    This beautiful table comes standard with the Avenger Chassis and Classic Platter, JMW 10-3D Tonearm, Prime Motor with 2-Step Pulley, Classic Signature Feet and an HR-X Center Weight. Does not include SDS or Periphery Ring Clamp.


    This product is not eligible for discount.


    Demo Discounts
    $7,499.00
    VPI Avenger - Open Box
    Buy Now
  • Record Puck Record Puck Quick View

    $85.00
    Buy Now
    x

    Record Puck

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The Record Puck is a heavy weight record clamp for Pro-Ject Turntables.

    Pro-Ject
    $85.00
    Record Clamp Buy Now
  • Standard Black Delrin Clamp Standard Black Delrin Clamp Quick View

    $100.00
    Buy Now
    x

    Standard Black Delrin Clamp



    Standard equipment on VPI's Scout series turntables, the Standard Delrin Clamp does an excellent job of reducing the effects of external vibration from interacting with the stylus. This improves focus and pacing, adding weight and power to the sonic presentation.


    Using the Standard Delrin Clamp, can also help reduce (and in some cases eliminate) record warpage and create a much tighter seal between the record and the turntable platter. The clamp essentially locks the record to the platter, reducing vibration typically picked up by the cartridge that colors the sound.


    VPI Accessories
    $100.00
    Delrin Clamp - Standard Black Buy Now
  • Concept Clamp/Weight Concept Clamp/Weight Quick View

    $124.99
    Buy Now
    x

    Concept Clamp/Weight

    The new clearaudio record clamp is distinguished by its ergonomic form, it is precision machined from aluminium, black anodized and finished with a silver rim. On the under side is a Teflon insert that locates over the spindle for frictionless positioning. The record clamp was designed for use with the new clearaudio turntable series (Concept, Innovation Compact, Innovation), however it can also be used with almost any turntable.


    With a weight of 215 gram, a height of 20 mm and a diameter of 75 mm it provides the best possible contact between record and platter as well as easy and ergonomic use.


    This product is not eligible for discount.

    Clearaudio
    $124.99
    Concept Clamp Buy Now
  • Clearaudio Quadro Clamp Clearaudio Quadro Clamp Quick View

    $200.00
    Buy Now
    x

    Clearaudio Quadro Clamp

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The Quadro Clamp is a heavy bead-blasted stainless steel record weight that increases the surface contact between the record and the platter.


    The Quadro Clamp is a record weight for turntables with pivoted arms. Its appearance and functionality will compliment any high quality turntable.

    Clearaudio
    $200.00
    Quadro Clamp Buy Now
  • Clever Clamp Clever Clamp Quick View

    $30.00
    Buy Now
    x

    Clever Clamp

    An ingenious record clamping unit, which is very flat and light, but very tight. Compatible with all turntables.
    Clearaudio
    $30.00
    Clever Clamp Buy Now
  • Clearaudio Twister Clamp Clearaudio Twister Clamp Quick View

    $149.99
    Buy Now
    x

    Clearaudio Twister Clamp

    LP-clamping unit with resonance absorbing locking unit and stainless steel grip.


    Ergonomically shaped, plate clamp made of high density plastic. Suitable for almost all turntables, ensures full contact of the record to the turntable quickly and easily to handle.

    Clearaudio
    $149.99
    Twister Clamp Buy Now
  • Periphery Ring Clamp Periphery Ring Clamp Quick View

    $1,000.00
    Buy Now
    x

    Periphery Ring Clamp


    The Periphery Ring Clamp greatly improves the performance of VPI turntables by flattening the outer edges of LPs, increasing the cartridge's tracking ability, removing resonance and aiding detail retrieval. A massive ring designed to sit just outside the lead-in groove, the Periphery Ring Clamp's weight flattens the record onto the platter, eliminating edge warps and more completely coupling the record to the platter.


    Scout, Aries 1 & 2, HW-19 & older TNT owners will need to purchase the HRX platter and bearing in order to use the Periphery Ring Clamp. Due to bearing height differences between the VPI models, please give us a call if you'd like to upgrade these components and we'll help you get the right bearing for your turntable.



    VPI Accessories
    $1,000.00
    Periphery Ring Clamp Buy Now
  • VPI HR-X Turntable VPI HR-X Turntable Quick View

    $12,000.00
    Buy Now
    x

    VPI HR-X Turntable


    Stereophile HRX HRX


    HRX
    HRX


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    THE LEAST EXPENSIVE AND BEST SELLING HIGH END TURNTABLE IN THE WORLD!


    Stereophile Analog Product of the Year runner-up to a $100,000.00 turntable


    The HR-X is known to reviewers and manufacturers around the world for it's natural reproduction of scale and sweep, which are two of the things that make us feel like we are listening to live music. With world class detail, low noise, pace, and timing, the HR-X will bring the concert hall into your home. Best of all, it does this without fiddling, tweaking, or constant resetting. The HR-X is a statement among belt drive turntables! The drive system and the periphery clamp result in wow, flutter, and rumble that are all below measurability providing world class sound.


    VPI Turntables
    $12,000.00
    HR-X - Turntable
    Buy Now
  • VPI Prime Scout Turntable VPI Prime Scout Turntable Quick View

    $2,199.00
    Buy Now
    x

    VPI Prime Scout Turntable



    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The Prime Scout features:


    • 300 (US) / 500(OS) RPM motor
    • Rounded black motor housing
    • MDF chassis vinyl wrapped with steel plate (black finish)
    • JMW 9 tonearm (VPI wire)
    • Standard VTA base
    • Machined aluminum 11-inch diameter platter, 1 1/3 inch thick
    • Delrin clamp - Scout Clamp

    VPI Turntables
    $2,199.00
    Scout 2017
    Buy Now
  • Pro-Ject 2Xperience SB Turntable 6 COLORS AVAILABLE Pro-Ject 2Xperience SB Turntable Quick View

    $1,599.00
    Buy Now
    x

    Pro-Ject 2Xperience SB Turntable



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Outstanding performance from a compact and luxurious turntable configuration


    The 2Xperience SB is based on the 2Xperience belt-drive concept which incorporates over 20 years of turntable design experience. The addition of a precision motor controller with electronic speed change, derived from the highly regarded Speed Box yields precise speed accuracy and push button convenience. The superb 9cc Evolution carbon fiber tonearm provides superb performance especially with the factory mounted Sumiko Blue Point No. 2 cartridge, while serving as a solid foundation for future upgrades. The heavy chassis is made from MDF using a non-resonant construction technique.


    The mat is created from a recycled vinyl record bonded to the platter and precision machined to create an ideal turntable/record interface. A custom light-weight record clamp reduces unwanted record vibration and ensures a tight coupling of the record to the platter. The audio performance of the final product benefits from the resonance-free platter, avoiding the ringing effect of common metal and glass platters. Available in a variety of beautiful finishes, the 2Xperience SB looks as good as it sounds and with the highly regarded Blue Point No. 2 included, represents a superb value.




    Pro-Ject
    $1,599.00
    2Xperience SB Turntable - 6 Colors Available
    Buy Now
  • Pro-Ject The Classic Turntable 3 COLORS AVAILABLE Pro-Ject The Classic Turntable Quick View

    $1,099.00
    Buy Now
    x

    Pro-Ject The Classic Turntable




    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    SB Upgrade Option: includes a record clamp, leather mat, electronic speed control and a Sumiko Blue Point No.2 cartridge


    The Classic combines the best of modern technical design with a timeless aesthetic that hearkens back to turntables of years past.


    Unlike other throw-back designs that rely solely on clichÉ "retro cool" styling to sell, The Classic is also a technical tour de force. Featuring a new 9" carbon fiber and aluminum composite tonearm, a completely new sub-chassis design, and a set of sophisticated isolation feet, The Classic offers a level performance the distantly-related turntables of analog's golden age could only dream of.


    Don't just take our word for it, though - EISA (the European Imaging and Sound Association) has already bestowed The Classic with their prestigious "Best Turntable Award" for 2017.


    The Classic arrives this month in three beautiful matte wood finishes: walnut, rosenut (walnut with a tasteful red tint), and eucalyptus. Turntable includes a hinged acrylic dustcover and an Ortofon 2M Silver moving magnet cartridge.


    Pro-Ject
    $1,099.00
    Classic Turntable with SB Upgrade Option - 3 Colors Available
    Buy Now
  • VPI Avenger Plus Turntable VPI Avenger Plus Turntable Quick View

    $14,999.99
    Buy Now
    x

    VPI Avenger Plus Turntable


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    With the creation and introduction of the Avenger and Avenger reference we found there was a large gap between the products in price range. To accommodate those looking for a step up from the Avenger but not ready to take go all in for the Avenger Reference, the Avenger Plus is exactly what it describes. An Avenger "plus" some solid upgrades that make it a step up from the standard Avenger. Using the technically from our behemoth Titan turntable, we have added the Harry Weisfeld Signature Rim Drive motor assembly. With improved engineering to make it easier to use than ever with an adjustable knob to move the rim drive mechanism which is driven by the included Analog Drive System. Additionally the tonearm is getting a step up with the JMW 12-3DR with Nordost Reference wire as well as a periphery ring clamp.


    The VPI Avenger chassis is three layers of bonded acrylic/aluminum/acrylic, with damping material between layers, locked in by 3 isolation steel corner posts, 3 bolts, and the massive bearing assembly. The corner posts which hold the tonearms (up to three will fit) have adjustable machined knobs giving the user the ability to easily raise and lower the height to level the table. Fully adjustable armboards are made from 5/5" 6061 aluminum for rigidity and grounding. The table can mount up to three arms, any manufacture's brand, and any length!


    VPI Turntables
    $14,999.99
    Avenger Plus Turntable
    Buy Now
  • VPI Avenger Turntable VPI Avenger Turntable Quick View

    $9,999.99
    Buy Now
    x

    VPI Avenger Turntable


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **Fully Customizable! See Features Tab For Upgrade Options - Please Call Our Audio Advisor To Discuss Upgrades**


    **All Cartridges Installed Free Of Charge**


    The VPI Avenger table was originally a project started by Harry over 12 years ago. In the process of the design the project was dropped in mid-production due to excessive demand by HR-X customers which left the design and proto-type chassis to be mothballed. The good news about the abandoned design is Harry instead shifted his focus into starting and completing the VPI Classic Turntable.


    Shortly after the development of the Prime, and while cleaning out the warehouse in preparation for a dealer training event, the forgotten Avenger and its designs were re-discovered! The working name was the Tri-Pod Project. Being newly motivated, Harry has finally put in motion the table that will be his master piece! The unique iterations that had been crafted from the original process were completed as Special Editions.


    This beautiful table comes standard with the Avenger Chassis and Classic Platter, JMW 10-3D Tonearm, Prime Motor with 2-Step Pulley, Classic Signature Feet and an HR-X Center Weight. Does not include SDS or Periphery Ring Clamp.


    This product is not eligible for further discount.


    VPI Turntables
    $9,999.99
    VPI Avenger
    Buy Now
  • VPI Avenger Reference Turntable VPI Avenger Reference Turntable Quick View

    $20,999.99
    Buy Now
    x

    VPI Avenger Reference Turntable


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **See Features Tab For Tonearm Upgrade Options - Please Call Our Audio Advisor To Discuss Upgrades**


    **All Cartridges Installed Free Of Charge**


    The VPI Avenger table was originally a project started by Harry over 12 years ago. In the process of the design the project was dropped in mid-production due to excessive demand by HR-X customers which left the design and proto-type chassis to be mothballed. The good news about the abandoned design is Harry instead shifted his focus into starting and completing the VPI Classic Turntable.


    Shortly after the development of the Prime, and while cleaning out the warehouse in preparation for a dealer training event, the forgotten Avenger and its designs were re-discovered! The working name was the Tri-Pod Project. Being newly motivated, Harry has finally put in motion the table that will be his master piece! The unique iterations that had been crafted from the original process were completed as Special Editions.


    This beautiful table comes standard with the Avenger Chassis with Magnetic Drive Platter, JMW 12-3D-R Tonearm, Rim Drive Motor Assembly, Machined Avenger Feet, HR-X Center Weight, ADS and Periphery Ring Clamp.


    This product is not eligible for further discount.


    VPI Turntables
    $20,999.99
    VPI Avenger Reference
    Buy Now
  • VPI Prime Turntable (Open Box) VPI Prime Turntable (Open Box) Quick View

    $2,999.00
    Buy Now
    x

    VPI Prime Turntable (Open Box)



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Thinking about upgrading your VPI Turntable? Call our audio advisors to discuss trade-in value.


    All Cartridges Installed Free of Charge


    Open Box


    The VPI Prime gets back to VPI's audiophile roots by focusing on a table that takes advantage of technological improvements to produce a quality high-end sound. The Prime is Mat Weisfeld's first solo design, taking all of VPI's collective experience to create a curvy, sexy new look while at the same time accommodating a 10" 3D arm. And that experience paid off: not only does the footprint work for looks and function, improved technology means a lower price for the 3D arm with the same sound result.


    Even with the new design, some of the classics remain: an outboard 300 RPM motor housing, a classic platter, a VTA tower for vertical tracking on the fly, and a stainless steel Delrin record clamp, all built on top of new Prime feet offering improved isolation.


    The VPI Prime Turntable Features:


    • 10 inch 3D arm

    • VTA Tower for vertical tracking on the fly

    • Metal Platter

    • Outboard 300 RPM motor housing

    • New Prime feet which offer improved isolation

    • Stainless Steel/Delrin record clamp



    Cartridge Not Included.



    Demo Discounts
    $2,999.00
    VPI Prime Turntable (Open Box)
    Buy Now
  • Pro-Ject 2Xperience Primary Acryl Turntable 4 COLORS AVAILABLE Pro-Ject 2Xperience Primary Acryl Turntable Quick View

    $999.00
    Buy Now
    x

    Pro-Ject 2Xperience Primary Acryl Turntable



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Limited edition audiophile turntable with acrylic chassis and class-leading sound!


    2Xperience Primary Acryl is an ultra-stylish record player that uses advanced technology for great sound. A quiet running AC motor with a two-step pulley drives the platter's outside edge via a belt. The resonance-optimised MDF platter with screwdown record clamp runs on a low-tolerance stainless-steel axle with Teflon bearing plate in a sintered bronze bearing housing. The transparent acrylic plinth stands on three height-adjustable TPE-damped aluminium cones.


    An external power supply avoids potential electro-mechanical interference. The sophisticated 9 tonearm uses an one-piece aluminium headshell & armtube and an inverted bearing design with four hardened ABEC7 spec ballraces. The solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle) if needed. The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated phono sockets.


    Pro-Ject
    $999.00
    2Xperience Primary Acryl Turntable - 4 Colors Available
    Buy Now
  • VPI Prime Turntable (Certified Pre-Owned) VPI Prime Turntable (Certified Pre-Owned) Quick View

    $2,899.00
    Buy Now
    x

    VPI Prime Turntable (Certified Pre-Owned)



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Thinking about upgrading your VPI Turntable? Call our audio advisors to discuss trade-in value.


    All Cartridges Installed Free of Charge


    Certified Pre-Owned



    The VPI Prime gets back to VPI's audiophile roots by focusing on a table that takes advantage of technological improvements to produce a quality high-end sound. The Prime is Mat Weisfeld's first solo design, taking all of VPI's collective experience to create a curvy, sexy new look while at the same time accommodating a 10" 3D arm. And that experience paid off: not only does the footprint work for looks and function, improved technology means a lower price for the 3D arm with the same sound result.


    Even with the new design, some of the classics remain: an outboard 300 RPM motor housing, a classic platter, a VTA tower for vertical tracking on the fly, and a stainless steel Delrin record clamp, all built on top of new Prime feet offering improved isolation.


    The VPI Prime Turntable Features:


    • 10 inch 3D arm

    • VTA Tower for vertical tracking on the fly

    • Metal Platter

    • Outboard 300 RPM motor housing

    • New Prime feet which offer improved isolation



    Cartridge Not Included.

    Demo Discounts
    $2,899.00
    VPI Prime Turntable (Certified Pre-Owned) - No Cartridge
    Buy Now
  • Classic 1 Turntable - Black Classic 1 Turntable - Black Quick View

    $3,299.00
    Buy Now
    x

    Classic 1 Turntable - Black


    Sterophile Golden Golden


    Absolute Absolute ToneAudio


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The VPI Classic 1 turntable comes standard with the unipivot JMW-10.5i tonearm Special Edition in rigid mount mode, new VPI silver coated pure copper wire, a 2.5 thick plinth trimmed with real black oak or real solid walnut finish (at no additional cost), a solid mounted 600 RPM AC synchronous motor, new 2 thick machined aluminum platter, silent inverted bearing, and new isolator feet derived from the HR-X.


    The sound of the Classic 1 turntable is fast, clean, wide open, with deep powerful bass, and unequalled in speed stability. The Classic 1 turntable gives any turntable made regardless of price a serious run for the money.


    This completely new design has produced the simplest and one of the best sounding VPI tables to date.


    VPI Classic Turntable Features:


    Special Edition JMW-10.5i SE tonearm - By giving up vta on the fly adjustments, you get most of the sound of the highly reviewed JMW-10.5i tonearm. A new less expensive base and mounting saves hundreds of dollars but gives up little in sound.


    New 6061 machined aluminum 18 pound high inertia platter with precision inverted bearing and stainless steel damping plate.


    Speed stability on par with a master tape - Due to the rigid mounting of motor - platter - tonearm there is no random motion to cause speed instabilities.


    Noise rejection allowing the Classic 1 turntable to sit on a wood shelf near four 15 subwoofers and having virtually no feedback.


    Lack of random motion between the motor - platter - tonearm gives the ultimate in low level resolution. Not only does this rigidity improve speed stability, it also allows the retrievel of low level information challenging the world's great turntables and master tapes.


    Absolutely solid, non-resonating laminated one-piece chassis holding all components. This is not a wooden frame; it is a solid laminated 2.5 thick MDF block with 11 gauge steel attached to the top with silicone and long bolts through all the layers. The chassis weighs 30 pounds and is totally non-resonant. Now with solid black oak or solid walnut wood finish on all four sides.


    RCA jack termination so you can use the interconnect of your choice.


    Tonearm anti-skate - For those that require the fine adjustment of anti-skate, it is standard on the JMW-10.5i SE.


    Optional lift off full dustcover is available.


    Optional periphery ring clamp.


    Optional SDS power supply.


    Optional XLR conectors.


    VPI Turntables
    $3,299.00
    Classic 1 - Black
    Buy Now
  • Classic Signature Turntable - Piano Black Classic Signature Turntable - Piano Black Quick View

    $5,999.00
    Buy Now
    x

    Classic Signature Turntable - Piano Black


    Stereophile
    Stereophile 2011 Golden


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    Periphery Ring Clamp Not Included


    It is a work of art, Harry Weisfeld's best. Amen! Five Stars.

    - Harry Pearson


    The Classic line pays homage to the great turntables of the past that have been synonymous with state of the art turntable design. The Classic has been the best selling turntable VPI has ever made and is still outselling production. The sales and rave reviews from around the world are based on the glorious sound and the incredible speed stability, speed stability normally associated with $10K plus designs. Our top of the line Classic 3 represents a significant step forward in both performance and aesthetics pushing the envelope as far as we can to deliver the best sounding turntable VPI has ever made.


    The Classic 3 features a ½ thick machined aluminum plinth bonded to a 1/8 steel sub plate, bonded to 2 of MDF creating a plinth which is so massive and well damped it virtually eliminates resonance.


    For the Classic 3 we updated the arm with a new JMW 10 3-D Tonearm, bearing assembly, base mounting, and VPI wiring from cartridge to RCA (or XLR) output jacks.


    New feet were designed for greater stability, better isolation, and a matching look to the larger chassis. To complete the visual aesthetic of this state of the art design, we chose a deep Piano Black finish to perfectly counterpoint the silvery sheen of the top section. Gorgeous and glorious, the Classic 3 is an absolute triumph! Manufacturers who have received there Classic 3 are using adjectives like Gorgeous, Quietest table I've ever heard, How could it be so inexpensive, Speed stability like my digital masters.


    The sound of the Classic 3 Turntable is powerful, airy, shockingly quick, and deathly quiet, with speed stability equal to any turntable in the world at any price.


    VPI Turntables
    $5,999.00
    Classic Signature
    Buy Now
  • VPI Prime Scout Turntable (with 9 Inch 3D Arm) VPI Prime Scout Turntable (with 9 Inch 3D Arm) Quick View

    $2,999.99
    Buy Now
    x

    VPI Prime Scout Turntable (with 9 Inch 3D Arm)



    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    Features:


    • 300 (US) / 500(OS) RPM motor
    • Rounded black motor housing
    • MDF chassis vinyl wrapped with steel plate (black finish)
    • Upgraded 9 Inch 3D Tonearm
    • Standard VTA base
    • Machined aluminum 11-inch diameter platter, 1 1/3 inch thick
    • Delrin clamp - Scout Clamp

    VPI Turntables
    $2,999.99
    VPI Prime Scout Turntable with 9 3D Tonearm - No Cartridge
    Buy Now
  • 1
Go to top