Vinyl. Our way of life since 2004 (877) 929-8729

VPI Dealer Authorized & Certified
Site Search
Menu Free shipping on domestic orders over $49.99! - We ship worldwide!
LP20 - 20% Off Vinyl
Home > Products for: '

Tonearm Cable

'
  • 1
  • 2
Results per page:
  • AudioQuest Wildcat Tonearm Cable (1.5m) AudioQuest Wildcat Tonearm Cable (1.5m) Quick View

    $89.00
    Buy Now
    x

    AudioQuest Wildcat Tonearm Cable (1.5m)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    RCA to RCA


    JIS Plug to RCA Available Upon Request


    Wildcat is sure to help you scratch deeper into your favorite records. Select metals, exact geometry, and low-distortion insulation offer significant improvements over almost any stock phono cable.


    SOLID PERFECT-SURFACE COPPER CONDUCTORS (PSC): Perfect-Surface Copper has an astonishingly smooth and pure surface. Proprietary metal-processing technology protects the wire's surface at every stage of drawing and fabrication. When high-purity low-oxide copper is kept as soft, pure and smooth as possible, it becomes a wonderfully low-distortion conductor. For over 30 years AudioQuest has pioneered the use of superior metals; yet even we were surprised by this huge leap in performance. PSC clearly outperforms previous AQ metals that cost over ten times as much. Electrical and magnetic interaction between strands in a conventional cable is the greatest source of distortion, often causing a somewhat dirty, harsh sound. Solid conductors are fundamental toward achieving Wildcat's very clean sound.


    FOAMED-POLYETHYLENE INSULATION: Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy (loss). Some of this energy is stored and then released as distortion. Wildcat uses air-filled Foamed-Polyethylene Insulation because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.


    TERMINATIONS: Wildcat's gold-plated RCA plugs use a proprietary design that eliminates the distortion caused by the extra contact inside most plugs. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machinability. A combination of these major ingredients, and many more subtle details add up to explain how Wildcat can sound so clean, clear and dynamic.


    AudioQuest
    $89.00
    Tonearm Cable Buy Now
  • AudioQuest Cougar Tonearm Cable (1.5m) AudioQuest Cougar Tonearm Cable (1.5m) Quick View

    $359.00
    Buy Now
    x

    AudioQuest Cougar Tonearm Cable (1.5m)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    RCA to RCA


    JIS Plug to RCA Available Upon Request


    With the addition of AudioQuest's patented Dielectric-Bias System, Cougar brings a level of low-level clarity and resolution rarely seen at this price. Perfect-Surface Copper+ is the icing on the cake, raising Cougar's performance significantly above Wildcat's.


    SOLID PERFECT-SURFACE COPPER+ CONDUCTORS (PSC+): Perfect-Surface Copper+ has an astonishingly smooth and pure surface. Proprietary metal-processing technology protects the wire's surface at every stage of drawing and fabrication. When high-purity low-oxide copper is kept as soft, pure and smooth as possible, it becomes a wonderfully low-distortion PSC+ conductor. PSC+ is manufactured by applying the same exceptional technology to an ultra-pure copper. The resulting sound quality is even more focused and simply less in the way. For over 30 years AudioQuest has pioneered the use of superior metals; yet even we were surprised by the huge leap in performance made possible with Perfect-Surface Technology. PSC+ simply outperforms all previously available copper metals at any price. All of Cougar's conductors are solid. Electrical and magnetic interaction between strands in a conventional cable is the greatest source of distortion, often causing a somewhat dirty, harsh sound. Solid conductors are fundamental toward achieving Cougar's very clean sound.


    FOAMED-POLYETHYLENE INSULATION: Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy (loss). Some of this energy is stored and then released as distortion. Cougar uses air-filled Foamed-Polyethylene Insulation because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.


    DIELECTRIC-BIAS SYSTEM (DBS, US Pat #s 7,126,055 & 7,872,195 B1): All insulation slows down the signal on the conductor inside. When insulation is unbiased, it slows down parts of the signal differently, a big problem for very time-sensitive multi-octave audio. AudioQuest's DBS creates a strong, stable electrostatic field which saturates and polarizes (organizes) the molecules of the insulation. This minimizes both energy storage in the insulation and the multiple nonlinear time-delays that occur. Sound appears from a surprisingly black background with unexpected detail and dynamic contrast. The DBS battery packs will last for years. A test button and LED allow for the occasional battery check.


    CARBON-BASED 2-LAYER NOISE-DISSIPATION SYSTEM (NDS): 100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment's ground reference requires AQ's Noise-Dissipation System. Metal and Carbon-Loaded synthetics prevent most RFI from reaching the equipment's ground plane.


    TERMINATIONS: Cougar's Cold-Welded Direct-Silver Plated RCA plugs use a proprietary design that eliminates the distortion caused by the extra contact inside most plugs. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machinability. A combination of these major ingredients, and many more subtle details add up to explain how Cougar can sound so clean, clear and dynamic.


    AudioQuest
    $359.00
    Tonearm Cable Buy Now
  • Ortofon Tonearm Cable - 6NX-TSW 1010 Ortofon Tonearm Cable - 6NX-TSW 1010 Quick View

    $314.00
    Buy Now
    x

    Ortofon Tonearm Cable - 6NX-TSW 1010

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The low signals from the cartridge are very sensitive to electromagnetic induced noise from the outside world. Things like mobile phones and home appliances challenge the tonearm cable. With this focus, Ortofon engineers have made a cable comprised of 7 cores 5N/6N OFC with a tight shield surrounding the cores for optimum shielding against electrical radiated noise.

    Ortofon Cartridges
    $314.00
    Tonearm Cable - 6NX-TSW 1010 Buy Now
  • Pro-Ject Connect It CC Phono RCA Pro-Ject Connect It CC Phono RCA Quick View

    $99.00
    Buy Now
    x

    Pro-Ject Connect It CC Phono RCA


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    1.23M RCA to RCA CC Tonearm Cable with Ground Wire


    Electrically shielded with conductors made of OFC copper and an additional layer of carbon fiber.


    Pro-Ject
    $99.00
    Phono Cable Buy Now
  • Concept Wood Turntable (Concept MC Cartridge) Concept Wood Turntable (Concept MC Cartridge) Quick View

    $2,999.99
    Buy Now
    x

    Concept Wood Turntable (Concept MC Cartridge)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The Concept Wood turntable furthers the sonic excellence of the award-winning Concept turntable. The Concept Wood uses a baltic birch, constrained layer plinth that is both visually attractive and sonically rich and smooth. The aluminum machined sub-platter and rear-mounted fine speed adjustments are an upgrade from the original Concept design. The Concept Wood is equipped with the Satisfy Black tonearm, which features a 3-point mechanical bearing, magnetic anti-skate, and hard-wired tonearm cable. You can upgrade to the Satisfy Carbon Fiber tonearm for enhanced musicality and imaging. A high-quality Clearaudio moving magnet (Concept MM) or moving coil (Concept MC) cartridge can be pre-mounted to complete this setup. The Concept is belt-driven by a low-noise, decoupled DC motor built into the baltic birch plinth. The platter is made of 30mm-thick polymer (POM), an engineering thermoplastic with a weighted rim for increased fly-wheel effect, providing greater speed stability. The Concept Wood plays at three speeds - 33rpm, 45rpm, and 78rpm - selectable by an Electronic Speed Control knob.


    Clearaudio Turntables
    $2,999.99
    Concept Wood Turntable - Concept MC Cartridge Buy Now
  • Concept Wood Turntable (Concept v2 MM Cartridge) Concept Wood Turntable (Concept v2 MM Cartridge) Quick View

    $3,000.00
    Buy Now
    x

    Concept Wood Turntable (Concept v2 MM Cartridge)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The Concept Wood turntable furthers the sonic excellence of the award-winning Concept turntable. The Concept Wood uses a baltic birch, constrained layer plinth that is both visually attractive and sonically rich and smooth. The aluminum machined sub-platter and rear-mounted fine speed adjustments are an upgrade from the original Concept design. The Concept Wood is equipped with the Satisfy Black tonearm, which features a 3-point mechanical bearing, magnetic anti-skate, and hard-wired tonearm cable. You can upgrade to the Satisfy Carbon Fiber tonearm for enhanced musicality and imaging. A high-quality Clearaudio moving magnet (Concept MM) or moving coil (Concept MC) cartridge can be pre-mounted to complete this setup. The Concept is belt-driven by a low-noise, decoupled DC motor built into the baltic birch plinth. The platter is made of 30mm-thick polymer (POM), an engineering thermoplastic with a weighted rim for increased fly-wheel effect, providing greater speed stability. The Concept Wood plays at three speeds - 33rpm, 45rpm, and 78rpm - selectable by an Electronic Speed Control knob.


    Clearaudio Turntables
    $3,000.00
    Concept Wood Turntable - Concept v2 MM Cartridge Buy Now
  • Ortofon Tonearm Cable - 6NX-TSW 1010R Ortofon Tonearm Cable - 6NX-TSW 1010R Quick View

    $314.00
    Buy Now
    x

    Ortofon Tonearm Cable - 6NX-TSW 1010R

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    High Purity (6N) Copper Cable, RCA-to-RCA


    The low signals from the cartridge are very sensitive to electromagnetic induced noise from the outside world. Things like mobile phones and home appliances challenge the tonearm cable. With this focus, Ortofon engineers have made a cable comprised of 7 cores 5N/6N OFC with a tight shield surrounding the cores for optimum shielding against electrical radiated noise.


    The 6NX TSW-1010 R (RCA to RCA) is the ideal solution for connecting the MC Transformer and Phono pre-amplifier.

    Ortofon Cartridges
    $314.00
    Tonearm Cable - 6NX-TSW 1010R Buy Now
  • The Ultimate Analogue Test LP The Ultimate Analogue Test LP Quick View

    $39.99
    Buy Now
    x

    The Ultimate Analogue Test LP

    Editors Editors Editors Editors


    Analogue Productions set out to produce the ultimate test record.


    We've consulted many experts in the field, including mastering engineers, audio experts, turntable experts and audiophile listeners, to create a test record that's never been made before. When Barry Wolifson from Sterling Sound in New York City called us with the same idea we had been thinking about - that being to create the ultimate test record - he and our audio expert Clark Williams began to brainstorm and research ideas until they were both completely satisfied with what should go on the record.


    Most of the test records in the past have been made to test a variety of equipment. This test record excludes silly cannon shots, typewriters, voices on one channel and other useless fluff. This one specifically addresses your turntable and cartridge. It's designed to provide the basic test signals necessary to calibrate a turntable or cutting lathe as simply as possible. Most of the signals have specific implications, but it is certainly possible to use them in any number of novel ways.


    This record was mastered and cut on a Neumann VMS 80 lathe at Sterling Sound and pressed at Record Technology, Inc. on high-quality, 180-gram virgin vinyl.


    Side 1

    General Reference Level

    This 1 kHz reference tone will allow you to establish a "base level" for all measurements.
    Track 1 1Khz reference tone 7cm/s Mono, in phase (Lateral)

    Basic reference for all measurements, adjust meter for maximum convenience (in the studio 0VU).
    Adjust preamp channel balance for equal output.
    Also used to check the offset angle of the photo cartridge; L&R signals should be exactly in phase as displayed on an oscilloscope.


    Azimuth Adjustment

    Track 2 1kHz reference level Left channel only

    Measure Right channel output.

    Track 3 1kHz reference level Right channel only

    Measure Left channel output.

    The object is to sit the stylus exactly perpendicular in the groove.

    Twist cartridge about its radial axis until the measurements from Track 2 and Track 3 are equal or very close to equal for both channels.


    High Frequency Adjustment

    Tracks 4, 5 and 6 are used to calibrate the RIAA high frequency equalizer of a phono preamp. This will be used to calibrate a mastering lathe's phono preamplifier or any phono preamplifier that has these adjustments.

    Track 4 1 kHz tone at -20 below reference level, Lateral

    Reference for High Frequency test.

    Track 5 10 kHz reference tone at -20dbu, Lateral
    Adjust the high frequency until the output level equals that of Track 4.

    Track 6 1 kHz to 20 kHz sweep at -20dbu, Mono (Lateral)

    The AC millivoltmeter reading should stay constant across all frequencies. There are a number of factors which can affect frequency response, including cable capacitance, cartridge loading, tracking force and worn parts. Because of this, it can be difficult to achieve perfectly flat frequency response. Sometimes by making small compromises in the 10 kHz adjustment, a better overall frequency response can be achieved.


    Low Frequency Adjustment

    Tracks 7 & 8 are used to calibrate the RIAA low frequency equalizer of a phono preamp.

    Track 7 1 kHz to 20 Hz sweep at 0 VU (Lateral)

    Play Track 7 and measure the output with your AC millivolt meter.

    Ideally, the output will be flat across all frequencies. When viewed on an oscilloscope, the amplitude would remain constant during the frequency downsweep.

    Track 8 100 Hz reference tone at 0 vu (Lateral)
    Adjust LF Eq to reference (which is your reading from Track 1).


    Track 9 VTA adjust

    This is an IEC intermodulation distortion (IMD) test signal; 60Hz & 4kHz 4:1 ratio.

    Using an IMD tester, adjust VTA by raising or lowering the tonearm for minimum distortion.


    Track 10 Standard Wow & Flutter test signal; 3150Hz
    The Wow & Flutter meter will give dynamic speed variations as a percentage deviation from nominal.

    Also, the frequency counter should read exactly 3150 Hz for nominal speed. You can use the Hz function on your multi-meter (if so equipped) to verify speed here as well. You can also use to find the measurements at 45RPM. The correct reading at 45RPM would be 4253 Hz (45/33.33) x 3150.


    Side 2

    Track 1 Anti-skating test; 315Hz amplitude sweep to +12dbu (Lateral)

    Signal should remain clean in both channels up to the highest level, both audibly and as viewed on an oscilloscope. In case of distortion, increase anti-skating force or decrease anti-skate until breakup occurs equally in both channels. The left channel information is inscribed on the inner groove wall, the right channel information, on the outer groove wall. Because of the offset angle of a pivoted tonearm, a constantly varying vector force biases the arm towards the center of the record causing the stylus to lose contact with the outer (i.e. right channel) groove wall. Both linear and modulated groove velocity, tracking force, stylus profile, and vinyl composition are contributing factors. The anti skating force attempts to ameliorate this by applying an opposing similar force.

    It is also accepted that the overall force vector increases as the tonearm approaches closer to the spindle or end of the record.


    Track 2 Pink noise lateral

    Track 3 Pink noise vertical

    Used for cartridge "demagnetizing"

    You can also use this track to loosen up the cantilever's suspension to help break in a new cartridge. Play these tracks five to ten times after every 300 hours of normal LP playback.


    Track 4 1kHz @ reference level, vertical
    This out-of-phase signal should cancel to nothing when summed to mono.

    Any signals still present are distortion artifacts, lack of channel balance, or timing (phase) anomalies. This test can be a second confirmation of anti-skate adjustment.


    Track 5 1kHz to 10Hz sweep @ -20 below

    reference level, vertical
    Resonance anomalies in the tonearm / cartridge interface will show up as amplitude peaks and dips as the frequency sweeps down.

    Once again, by listening in 'Mono' it is easier to hear the distortion artifacts.


    Track 6 Silent groove for bearing rumble and table isolation

    During playback of this track, nothing should be transmitted from the turntable to the speakers. Replay the track and gently tap on the rack or base that the turntable is resting on. There should be little or no thump transferred to the speakers. This track will help you experiment with turntable isolation methods and products to be able to get the most out of your playback system. You may want to use a closed or sealed headphone for best listening results, or a stethoscope on the plinth.

    Analogue Productions
    $39.99
    180 Gram Audiophile Virgin Vinyl LP - Sealed Buy Now
  • KS 1236 KS 1236 Quick View

    $1,408.00
    Buy Now
    x

    KS 1236

    Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    KS1236 is the bulked up big brother to the acclaimed KS1230 Tonearm Kables. With more authoritative presence the most challenging passages will come to life in your listening room. Dynamic compromise is the enemy to all things analog and only with the use of our constrained matrix geometry and the X38R core electrical and mechanical dampening can your listening really find it's groove again.


    Kimber Kable
    $1,408.00
    KS 1236 Phono Cable
    Buy Now
  • Pro-Ject Xtension 12 Evolution Turntable 6 OPTIONS AVAILABLE Pro-Ject Xtension 12 Evolution Turntable Quick View

    $4,499.00
    Buy Now
    x

    Pro-Ject Xtension 12 Evolution Turntable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Manual turntable with build in Pro-Ject Speed Box SE


    Pro-Ject's Xtension 12 incorporates over 20 years of experience in turntable design and manufacture. The Xtension 12 represents their latest technological efforts to address mass-decoupling and resonance reduction. Beginning with the mass-loaded magnetically floated sub-chassis and the precision balanced sandwich alloy platter (recycled vinyl/alloy), the foundation of this system weighs in at a super-heavy 55lbs. Additionally, Pro-Ject employs magnetic decoupling feet to thwart airborne or mechanical vibration from disturbing playback. This mass and isolation creates an environment of extremely low resonance allowing music to emerge from an ultra-silent black background. An AC motor with a two-step pulley drive with Electronic Speed Control maintains perfect pitch and rhythm resulting in inaudible wow, flutter and noise. There's even a built-in spirit level to assist setting the height-adjustable magnetic footers.


    Further reducing noise and vibration is the isolated Sorbothane mounting board for the 12 carbon-fiber tonearm. The conical arm and unified headshell are fabricated from a single piece of carbon fiber to avoid problems associated with standing wave reflections. Single screw fixing of the armtube allows for easy rotation for adjustment of needle azimuth. Additionally the arm is fully adjustable for VTA. A high-performance 123cm phono interconnect cable is included.


    Optional SuperPack includes Sumiko Blackbird Cartridge at a significantly reduced price.


    Pro-Ject
    $4,499.00
    Xtension 12 Evolution Turntable - 3 Colors Available - SuperPack Option
    Buy Now
  • Ortofon Tonearm Cable - 6NX TSW-1010 L Ortofon Tonearm Cable - 6NX TSW-1010 L Quick View

    $345.00
    Buy Now
    x

    Ortofon Tonearm Cable - 6NX TSW-1010 L

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The low signals from the cartridge are very sensitive to electromagnetic induced noise from the outside world. Things like mobile phones and home appliances challenge the tonearm cable. With this focus, Ortofon engineers have made a cable comprised of 7 cores 5N/6N OFC with a tight shield surrounding the cores for optimum shielding against electrical radiated noise.


    The 6NX TSW-1010 L (Angled DIN to RCA) is used where space is an issue.

    Ortofon Cartridges
    $345.00
    Tonearm Cable - 6NX-TSW 1010L Buy Now
  • AudioQuest Saturn GroundGoody Cable MULTIPLE LENGTHS AVAILABLE AudioQuest Saturn GroundGoody Cable Quick View

    $27.00
    Buy Now
    x

    AudioQuest Saturn GroundGoody Cable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Partners with any AudioQuest RCA cable to create a low-distortion tonearm cable. Minimizes Distortion, Protects against RFI.


    • Solid Perfect-Surface Copper (PSC+) Conductors
    • Noise-Dissipation System
    • Direction Controlled to Drain RF Noise
    • Direct-Silver Plated 3/16 (4.8mm) Spades


    AudioQuest
    $27.00
    Ground Cable - Multiple Lengths Available
    Buy Now
  • VPI Scout Jr Turntable Package - Ortofon Cable VPI Scout Jr Turntable Package - Ortofon Cable Quick View

    $1,814.00
    Buy Now
    x

    VPI Scout Jr Turntable Package - Ortofon Cable



    Ready To Use Out Of The Box!


    Comes Pre-Mounted With An Ortofon 2M Red Cartridge


    The VPI Scout Jr. is a ready to use out of the box high-end entry level turntable. Complete with a pre-mounted Ortofon 2M Red cartridge on a 9 inch Gimballed/Yoke bearing, it is the perfect solution to enjoying your music! The Scout Jr. turntable is a precision instrument thoroughly tested.


    About The Ortofon Cable:

    High Purity (6N) Copper Cable, RCA-to-RCA


    The low signals from the cartridge are very sensitive to electromagnetic induced noise from the outside world. Things like mobile phones and home appliances challenge the tonearm cable. With this focus, Ortofon engineers have made a cable comprised of 7 cores 5N/6N OFC with a tight shield surrounding the cores for optimum shielding against electrical radiated noise. The 6NX TSW-1010 R (RCA to RCA) is the ideal solution for connecting the MC Transformer and Phono pre-amplifier.


    VPI Turntables
    $1,814.00
    Scout Jr + Ortofon 2M Red + Ortofon Cable Buy Now
  • VPI Scout Jr Turntable Package - Ortofon 2M Blue & Cable VPI Scout Jr Turntable Package - Ortofon 2M Blue & Cable Quick View

    $2,050.00
    Buy Now
    x

    VPI Scout Jr Turntable Package - Ortofon 2M Blue & Cable



    Ready To Use Out Of The Box!


    The VPI Scout Jr. is a ready to use out of the box high-end entry level turntable. Complete with a pre-mounted Ortofon 2M Red cartridge on a 9 inch Gimballed/Yoke bearing, it is the perfect solution to enjoying your music! The Scout Jr. turntable is a precision instrument thoroughly tested.


    About The Ortofon Cable:

    High Purity (6N) Copper Cable, RCA-to-RCA

    The low signals from the cartridge are very sensitive to electromagnetic induced noise from the outside world. Things like mobile phones and home appliances challenge the tonearm cable. With this focus, Ortofon engineers have made a cable comprised of 7 cores 5N/6N OFC with a tight shield surrounding the cores for optimum shielding against electrical radiated noise. The 6NX TSW-1010 R (RCA to RCA) is the ideal solution for connecting the MC Transformer and Phono pre-amplifier.


    VPI Turntables
    $2,050.00
    Scout Jr + Ortofon 2M Blue + Ortofon Cable Buy Now
  • Pro-Ject 6Perspex Turntable SUPERPACK OPTION Pro-Ject 6Perspex Turntable Quick View

    $1,799.00
    Buy Now
    x

    Pro-Ject 6Perspex Turntable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Listening tests showed that metal springs and sub-chassis limit the sonic possibilities of our subchassis turntable classic Perspective. With the 6perspeX we cut our own path: The sub-chassis is made out of ´Corean´ which shows no resonances at all and this assembly is supported by magnetic power instead of metal springs providing excellent decoupling. The result was phenomenal, so we decided to combine this ultimate turntable design with our new High-End tone-arm Pro-Ject ´9cc Evolution´. As a conclusion, the revolutionary decoupling concept and the mechanical tone-arm masterpiece show outstanding abilities in fine dynamics and push the limits of analogue audio one step further.


    Optional SuperPack Includes Sumiko Blue Point Special EVO III and Connect-it E Tonearm Cable


    Pro-Ject
    $1,799.00
    6Perspex - SuperPack Option
    Buy Now
  • Concept Wood Turntable (No Cartridge) Concept Wood Turntable (No Cartridge) Quick View

    $2,200.00
    Buy Now
    x

    Concept Wood Turntable (No Cartridge)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The Concept Wood turntable furthers the sonic excellence of the award-winning Concept turntable. The Concept Wood uses a baltic birch, constrained layer plinth that is both visually attractive and sonically rich and smooth. The aluminum machined sub-platter and rear-mounted fine speed adjustments are an upgrade from the original Concept design. The Concept Wood is equipped with the Satisfy Black tonearm, which features a 3-point mechanical bearing, magnetic anti-skate, and hard-wired tonearm cable. You can upgrade to the Satisfy Carbon Fiber tonearm for enhanced musicality and imaging. A high-quality Clearaudio moving magnet (Concept MM) or moving coil (Concept MC) cartridge can be pre-mounted to complete this setup. The Concept is belt-driven by a low-noise, decoupled DC motor built into the baltic birch plinth. The platter is made of 30mm-thick polymer (POM), an engineering thermoplastic with a weighted rim for increased fly-wheel effect, providing greater speed stability. The Concept Wood plays at three speeds - 33rpm, 45rpm, and 78rpm - selectable by an Electronic Speed Control knob.


    Clearaudio Turntables
    $2,200.00
    Concept Wood Turntable Buy Now
  • Prestige Series Blue Cartridge Prestige Series Blue Cartridge Quick View

    $125.00
    Buy Now
    x

    Prestige Series Blue Cartridge

    The Prestige (and upscale Reference) cartridges from Grado are the first released since the elder Grado's retirement, but they mark an evolution, not dramatic change, of the classic Grado style. There are three basic levels in the Prestige lineup: Black/Green, Blue/Red, and Silver/Gold. In each of these pairings, the latter model is the same as the former, but is able to meet more astringent test specifications. The Green, for instance, is taken from the top 15% of the Black models production.


    The newly redesigned Blue1 and Red1 have had their coil design reconfigured, and the effective moving mass of their generating system has been reduced by 17%. The Blue1 and Red1 models use a four piece OTL cantilever technology, standard oxygen free wire in the coils and Grado's specially designed elliptical diamond mounted on a brass bushing. The Red1 model is selected from the Blue1 production run and meets higher test specifications. Approximately 10% of the production run will meet these standards and become Red1 models.


    All Grado Prestige cartridges have a fixed magnet and coils that generate a flux field axial pivot. A small generator disc is attached to the back end of the cantilever and moves within the lines of flux of the four coils and magnet generating a signal in response to stylus movement. The user-replaceable, elliptical diamond stylus is attached to the cantilever and moves within the four separate magnetic gaps which comprise what Grado calls a "flux-bridger" generator system. The generating element creates a flux increase in one gap while decreasing it in another to reduce distortion. According to Grado's literature, this design requires fewer coil turns, resulting in lower cartridge mass and electrical inductance. The cartridge is said to be insensitive to tonearm cable capacitance. The Grado cartridges are hand-built in the U.S.,and each cartridge is tested against Grado's standard for performance.


    Frequency Response: 10-55

    Principal: MI

    Channel Separation at 1KHz: 30

    Input Load: 47K

    Output at 1KHz 5CM/Sec.: 5mV

    Recommended Tracking Force: 1.5

    Stylus Type: E

    Inductance: 45mH

    Resistance: 475

    Compliance CUs: 20

    Stylus Replacement F: U

    Mounting: S/P

    Weight: 5.5




    This product is not eligible for discount.

    Grado Cartridges
    $125.00
    Cartridge Buy Now
  • Pro-Ject Primary Turntable 2 COLORS AVAILABLE Pro-Ject Primary Turntable Quick View

    $249.00
    Buy Now
    x

    Pro-Ject Primary Turntable



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Audiophile "Plug & Play" turntable with easiest possible set-up and class-leading sound!


    It comes with an included dustcover and is pre-mounted with the capable Ortofon OM 5E moving magnet cartridge. The silicone drive belt along with a low-vibration synchronous motor is powered by an onboard DC to AC generator to ensure silent motor operation. The 8.6 aluminum tonearm with sapphire bearings is terminated with a gold-plated RCA cable for accurate and precise audio signal transmission. The low resonance platter features a stainless steel spindle and a brass bushing with a low-friction Teflon layer to virtually eliminate any bearing noise. Pro-Ject's Primary turntable take your vinyl playback to the next level without cleaning out your wallet. Available in matte Black or White.



    Pro-Ject
    $249.00
    Primary Turntable - 2 Colors Available
    Buy Now
  • KS 1216 KS 1216 Quick View

    $630.00
    Buy Now
    x

    KS 1216

    Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The KS1216 Phono Cable from Kimber Kable is available with a DIN to Ultraplate connector or DIN to 102Cu connector.


    Vinyl's hot again. We would say that vinyl is still the great format it has always been. Kimber Select Tonearm Kables bring the ultimate performance to the ultimate source. Your turntable will sound more open and articulate. Dynamic compromise is the enemy to all things analog and only with the use of our constrained matrix geometry and the X38R core electrical and mechanical dampening can your listening really find it's groove again.


    Kimber Kable
    $630.00
    KS 1216 Phono Cable
    Buy Now
  • Pro-Ject RPM 10 Carbon Turntable SUPERPACK OPTION Pro-Ject RPM 10 Carbon Turntable Quick View

    $3,499.00
    Buy Now
    x

    Pro-Ject RPM 10 Carbon Turntable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    High-end belt-driven turntable with 10 EVO carbon fiber tonearm, outboard motor, and included isolation base


    Beautiful, clever design with ultimate high-end sound quality


    Thanks to extensive research and development, we have now elevated our classic RPM design to an even higher level. The RPM 10 Carbon uses a new extra-heavy chassis which features a special CNC-machined MDF base with resin-coated steel pellets to form an extra-heavy and precise sandwich construction. A special, complex heat treatment and carbon surface coating ensures superior low resonance levels. The mass-loaded chassis is effectively decoupled from its surface using magnetic feet. Combined with a new special polished aluminum platter with internal TPE damping and a vinyl layer on top, the inverted ceramic main bearing delivers an absolutely stable turntable speed with extra-low rumble due to the magnetic suspension of the platter. The heavy outboard motor unit is equipped with precise motor control and features a built-in switch between 33 & 45 rpm. Last but not least, the no-compromise 10 EVO tonearm with conical carbon-fiber arm tube and inverted bearing design ensures perfect tracking, even with demanding cartridges. Highly flexible, top-grade copper internal wiring is used. The RPM 10 Carbon is delivered with Ground it Carbon equipment base and top-grade 5P phono cable Connect It CC with RCA plugs.


    Optional RPM 10 Carbon Superpack includes Sumiko Blackbird Cartridge



    Pro-Ject
    $3,499.00
    RPM 10 Turntable - SuperPack Option
    Buy Now
  • Pro-Ject RPM 10 Carbon Turntable with Superpack (Low Output) (Open Box) Pro-Ject RPM 10 Carbon Turntable with Superpack (Low Output) (Open Box) Quick View

    $2,999.00
    Buy Now
    x

    Pro-Ject RPM 10 Carbon Turntable with Superpack (Low Output) (Open Box)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.




    Open Box


    RPM 10 Carbon Superpack includes Low Output Sumiko Blackbird Cartridge



    High-end belt-driven turntable with 10 EVO carbon fiber tonearm, outboard motor, and included isolation base


    Beautiful, clever design with ultimate high-end sound quality


    Thanks to extensive research and development, we have now elevated our classic RPM design to an even higher level. The RPM 10 Carbon uses a new extra-heavy chassis which features a special CNC-machined MDF base with resin-coated steel pellets to form an extra-heavy and precise sandwich construction. A special, complex heat treatment and carbon surface coating ensures superior low resonance levels. The mass-loaded chassis is effectively decoupled from its surface using magnetic feet. Combined with a new special polished aluminum platter with internal TPE damping and a vinyl layer on top, the inverted ceramic main bearing delivers an absolutely stable turntable speed with extra-low rumble due to the magnetic suspension of the platter. The heavy outboard motor unit is equipped with precise motor control and features a built-in switch between 33 & 45 rpm. Last but not least, the no-compromise 10 EVO tonearm with conical carbon-fiber arm tube and inverted bearing design ensures perfect tracking, even with demanding cartridges. Highly flexible, top-grade copper internal wiring is used. The RPM 10 Carbon is delivered with Ground it Carbon equipment base and top-grade 5P phono cable Connect It CC with RCA plugs.



    Demo Discounts
    $2,999.00
    RPM 10 Turntable w/Superpack - Open Box Buy Now
  • Rega Planar 3 Turntable 9 OPTIONS AVAILABLE Rega Planar 3 Turntable Quick View

    $945.00
    Buy Now
    x

    Rega Planar 3 Turntable

    40th
    5


    Need help choosing the right turntable for you? Please contact our audio advisor at 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    Replacing the multi award winning and five times What Hi-Fi? Product of the Year (RP3) was never going to be an easy task. It took a team of designers headed up by Rega's Roy Gandy, two years to develop the all new 'Planar 3' following the biggest re-design of the iconic 'three' model ever seen.


    The Rega team has worked tirelessly to improve every aspect of this turntable offering improved ergonomics, usability and first and foremost, sonic performance.The new 'Planar 3' is truly a new turntable for 2016 carrying over just two components from the previous model.


    New features of the Planar Three:


    RB330 tonearm - Designed using the latest 3D CAD & CAM technology, the new RB330 is the culmination of more than 35 years of tonearm design experience. Featuring a brand new bearing housing, and our latest tonearm tube designed using intelligent redistribution of mass ensure this arm will exhibit fewer points of possible resonance. Extreme stability with almost friction free movement from the new high precision bearing assemblies guarantees to gather more information from your vinyl than ever before.


    • Featuring a new bias assembly, re-designed stiffer vertical bearing housing, integrated
      arm clip and an improved spring housing with easier to read numbers.
    • Rega made, new low capacitance phono cable with Neutrik plugs,
    • Improved lower friction, precision horizontal and vertical bearings
    • New design 100g mild steel balance weight.


    Plinth - High gloss acrylic, laminated plinth, stiffer and vastly improved appearance, ergonomically positioned power switch.Two plinth finishes at launch: gloss black & gloss white


    Double braces - Improved thicker 3mm phenolic bottom brace and new metalised skin phenolic top brace.


    Bearing housing - Re-designed brass main hub central bearing, improved fit and construction reducing stress on the bearing itself.


    Sub platter - Re-designed sub platter, improved accuracy and improved stiffness.


    Platter - New float glass 'Optiwhite' polished rim 12mm - Improved accuracy in manufacture and stunning looks.


    Re-designed foot - New improved foot to increase stability and reduce vibration transfer.


    24V motor - Improved new motor control PCB with integration for the addition of TT-PSU for electronic speed change and improved advanced anti-vibration circuit (sold separately).


    Motor cover tray with integrated cooling.


    DB Technology (Double Brace Technology)

    Mass absorbs energy - lost energy equals lost music!


    Rega has pioneered the use of lightweight rigid plinths. Clever use of lightweight particulate core with a highly rigid phenolic resin skin became the foundations of the high level of performance achieved by the now iconic original Planar range.


    The new Planar 3 takes this design philosophy to the next level. A lightweight acrylic laminated plinth strengthened using a new improved double brace system mounted specifically where the increased rigidity is required (between the tonearm mounting and the main hub bearing) which forms a structurally sound stressed beam assembly. This rigid plinth design prevents energy absorption and unwanted resonance, which will add unnatural distortions to the music.


    Equally, heavier mass can transfer more unwanted energy, such as motor or bearing noise directly into the rotating record. The use of braces instead of the complete skin allows double thickness phenolic resin in these key areas while providing further weight reduction to the plinth which directly addresses the issue of mass absorption and unwanted energy transmission.


    Hand assembled RB330 tonearm.

    24v low noise motor / 12mm float glass platter.

    Lightweight double braced plinth.

    Precision main bearing.

    Factory fitted Elys2 MM cartridge or mounted with Ortofon 2m Blue cartridge (optional).

    Compatible with the TT-PSU electronic speed change and power supply box (optional).


    Rega Turntables
    $945.00
    Planar Turntable - Black, White, or Red - Cartridge Options
    Buy Now
  • Rega Planar 3 with Shelter 201 Cartridge (Certified Pre-Owned) Rega Planar 3 with Shelter 201 Cartridge (Certified Pre-Owned) Quick View

    $899.00
    Buy Now
    x

    Rega Planar 3 with Shelter 201 Cartridge (Certified Pre-Owned)

    40th
    5


    Need help choosing the right turntable for you? Please contact our audio advisor at 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Certified Pre-Owned


    Includes Shelter 201 Moving Magnet Cartridge


    Replacing the multi award winning and five times What Hi-Fi? Product of the Year (RP3) was never going to be an easy task. It took a team of designers headed up by Rega's Roy Gandy, two years to develop the all new 'Planar 3' following the biggest re-design of the iconic 'three' model ever seen.


    The Rega team has worked tirelessly to improve every aspect of this turntable offering improved ergonomics, usability and first and foremost, sonic performance.The new 'Planar 3' is truly a new turntable for 2016 carrying over just two components from the previous model.


    New features of the Planar Three:


    RB330 tonearm - Designed using the latest 3D CAD & CAM technology, the new RB330 is the culmination of more than 35 years of tonearm design experience. Featuring a brand new bearing housing, and our latest tonearm tube designed using intelligent redistribution of mass ensure this arm will exhibit fewer points of possible resonance. Extreme stability with almost friction free movement from the new high precision bearing assemblies guarantees to gather more information from your vinyl than ever before.


    • Featuring a new bias assembly, re-designed stiffer vertical bearing housing, integrated
      arm clip and an improved spring housing with easier to read numbers.
    • Rega made, new low capacitance phono cable with Neutrik plugs,
    • Improved lower friction, precision horizontal and vertical bearings
    • New design 100g mild steel balance weight.


    Plinth - High gloss acrylic, laminated plinth, stiffer and vastly improved appearance, ergonomically positioned power switch.Two plinth finishes at launch: gloss black & gloss white


    Double braces - Improved thicker 3mm phenolic bottom brace and new metalised skin phenolic top brace.


    Bearing housing - Re-designed brass main hub central bearing, improved fit and construction reducing stress on the bearing itself.


    Sub platter - Re-designed sub platter, improved accuracy and improved stiffness.


    Platter - New float glass 'Optiwhite' polished rim 12mm - Improved accuracy in manufacture and stunning looks.


    Re-designed foot - New improved foot to increase stability and reduce vibration transfer.


    24V motor - Improved new motor control PCB with integration for the addition of TT-PSU for electronic speed change and improved advanced anti-vibration circuit (sold separately).


    Motor cover tray with integrated cooling.


    DB Technology (Double Brace Technology)

    Mass absorbs energy - lost energy equals lost music!


    Rega has pioneered the use of lightweight rigid plinths. Clever use of lightweight particulate core with a highly rigid phenolic resin skin became the foundations of the high level of performance achieved by the now iconic original Planar range.


    The new Planar 3 takes this design philosophy to the next level. A lightweight acrylic laminated plinth strengthened using a new improved double brace system mounted specifically where the increased rigidity is required (between the tonearm mounting and the main hub bearing) which forms a structurally sound stressed beam assembly. This rigid plinth design prevents energy absorption and unwanted resonance, which will add unnatural distortions to the music.


    Equally, heavier mass can transfer more unwanted energy, such as motor or bearing noise directly into the rotating record. The use of braces instead of the complete skin allows double thickness phenolic resin in these key areas while providing further weight reduction to the plinth which directly addresses the issue of mass absorption and unwanted energy transmission.


    Hand assembled RB330 tonearm.

    24v low noise motor / 12mm float glass platter.

    Lightweight double braced plinth.

    Precision main bearing.

    Factory fitted Elys2 MM cartridge or mounted with Ortofon 2m Blue cartridge (optional).

    Compatible with the TT-PSU electronic speed change and power supply box (optional).


    Demo Discounts
    $899.00
    Rega Planar 3 Turntable - Black - Shelter 201 Cartridge (Certified Pre-Owned) Buy Now
  • Sony PS-HX500 Digital USB Turntable Sony PS-HX500 Digital USB Turntable Quick View

    $599.00
    Buy Now
    x

    Sony PS-HX500 Digital USB Turntable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Digitally captures analog in its purest form


    Turntable for playing vinyl and recording in High-Resolution

    Breathe new life into analog masterpieces with DSD. Just hook up the PS-HX500 turntable to your PC via USB, play a record, and capture every aspect of the vinyl with DSD 5.6 MHz native conversion. Convert your precious vinyl collection into High-Resolution Audio, take it out for a walk with your Walkman®, or just sit back and enjoy playing your vinyl originals.


    Vinyl goes portable in High-Resolution Audio


    Convert your records to high quality digital music files

    The PS-HX500 is equipped with a high-quality A/D converter. So just connect it to your PC with a USB cable and record your vinyl as High-Resolution Audio tracks. This is a great way to backup your precious vinyl collection, or even take tracks outdoors with you on your portable music device.


    Get your records ready to go


    The goodness of vinyl, without the bulk

    The authentic sound of vinyl, with all its warmth and smoothness, can be enjoyed anytime and anywhere with digital convenience-at home, outdoors, and in your car.


    Advanced features do the heavy lifting

    Simply connect the PS-HX500 to a PC's USB port and convert your vinyl tracks into high quality digital ones. The supplied PC application lets you rip, edit and store tracks from your vinyl records.


    High-Resolution Audio file formats

    In addition to DSD-recorded DSF files, recording and playback of PCM-recorded WAV files is also supported.


    Relive the master performances right away


    Integrate it into your high-quality audio system

    Connecting the PS-HX500 with a high-quality audio component system enables you to enjoy all your vinyl with all the raw realism they can offer.


    Sound technologies for analog enjoyment

    Enjoy all the smooth and warm sound expressions your vinyl is capable of; the PS-HX500 is equipped with the high-quality audio technology to make it possible.


    Newly designed integrated shell type straight tonearm

    The integrated shell improves durability and stabilizes the cartridge for superior focusing and dimensionality of sound, while its lightweight structure improves traceability.


    Turntable-stability in motion

    The turntable uses the latest techniques to deliver extremely stable rotation for optimal and natural delivery of your music.


    • Highly stable belt drive system - The optimized spindle-bearing construction stabilizes the belt drive to achieve natural sound reproduction.
    • High quality 0.20-inch rubber mat - Excellent adherence to the record's surface minimizes unnecessary resonance for clean sound.
    • Aluminum die cast platter - The high-inertia aluminum die cast platter offers superb balance between strength and mass.


    What's in the cabinet


    Sony's excellent speaker technology has been incorporated in the MDF cabinet to deliver high acoustic quality.


    • Acoustic-grade MDF cabinet - The 1.18-inch thick MDF cabinet has excellent sonic characteristics for accurate soundstage reproduction.
    • >Insulated structure - Thoroughly insulated including rubber dampers to eliminate vibration from racks and other peripherals.
    • Glass epoxy circuit board - Using glass epoxy resin for the circuit board helps to provide better sound quality and stability.


    Just connect it to a PC via USB and convert analog records into DSD 5.6 MHz native files. DSD captures the fine nuances of old masterpieces including the smoothness of vinyl. Archive files to a music server, take them out on your Walkman® or enjoy them in your car. An internal Phono EQ amp lets you enjoy analog through a high quality audio system.


    Turntables
    $599.00
    Digital USB Turntable With High-Resolution Recording Buy Now
  • 1
  • 2
Go to top