Vinyl. Our way of life since 2004 (877) 929-8729

VPI Dealer Authorized & Certified
Site Search
Menu Free shipping on domestic orders over $49.99! - We ship worldwide!
20% Off Vinyl - LP20
Home > Products for: '

The Thermals

'
  • 1
  • 2
Results per page:
  • The Body, The Blood, The Machine The Body, The Blood, The Machine Quick View

    $15.99
    Buy Now
    x

    The Body, The Blood, The Machine

    The Body, The Blood, The Machine was recorded at Supernatural Sound Studios in Oregon City, twenty miles
    south of The Thermals' home in Portland, OR by Fugazi's Brendan Canty. With the unfortunate departure of original Thermals drummer Jordan Hudson in late 2005, Kathy Foster and Hutch Harris (bass and guitar/vocals, respectively) split up duties on the new record themselves with Foster pulling double shifts as The Thermals' rhythm section for almost the entire record while Harris sang, performed all the guitar tracks, played some bass-and the two shared keyboard/organ duties.


    With a wider, brighter, and wilder sound than anything The Thermals have done in the past, The Body, The Blood, The Machine adds walls of guitars, organs, and even a few ballads (aka slightly pretty songs) to the mix, while still retaining the gritty post-pop-punk sound for which The Thermals are globally famous. The lyrics envision a United States governed by a fascist Christian state, and focus on the need (and means) to escape. While hardly a concept album, there is definitely a story told in the songs: a story about getting the fuck out while you still can.

    1. Here's Your Future
    2. I Might Need You to Kill
    3. An Ear for Baby
    4. A Pillar of Salt
    5. Returning to the Fold
    6. Test Pattern
    7. St. Rosa and the Swallows
    8. Back to the Sea
    9. Power Doesn't Run on Nothing
    10. I Hold the Sound
    Thermals
    $15.99
    Vinyl LP -Sealed Buy Now
  • Now We Can See Now We Can See Quick View

    $14.99
    Buy Now
    x

    Now We Can See

    Though not a concept record and not a sequel, Now We Can See picks up right where The Thermals left off, at the end of their last LP, 2006's The Body, The Blood, The Machine, where they were either obliterated by nuclear war, or walked the earth as the last living souls, until they dropped dead of quite unnatural causes. Either way, the story continues. The Thermals imagine death by drowning, in attempts to de-evolve (When I Died, At The Bottom of the Sea), death by psychosis (We Were Sick, I Called Out Your Name), and death by French exit (You Dissolve). But as much death as there is on this record, it won't get you down! These songs are really about life. After all, The Thermals are only fictionally deceased.


    The Thermals have returned to what they do best, writing undeniably catchy punk tunes. - Spin

    1. When I Died
    2. We Were Sick
    3. I Let It Go
    4. Now We Can Wee
    5. At The Bottom of the Sea
    6. When We Were Alive
    7. I Called Out Your Name
    8. When I Was Afraid
    9. Liquid In, Liquid Out
    10. How We Fade
    11. You Dissolve
    Thermals
    $14.99
    Vinyl LP -Sealed Buy Now
  • More Parts Per Million More Parts Per Million Quick View

    $15.99
    Buy Now
    x

    More Parts Per Million

    The Thermals celebrate their 10-year anniversary by reissuing their three Sub Pop albums on vinyl. More Parts Per Million is the band's debut album, originally released by Sub Pop on March 4th, 2003. The Thermals were created in 2002 by singer Hutch Harris in his Portland-area kitchen. By that summer, they was a rock band in the flesh, with Kathy Foster on bass, Jordan Hudson on Drums and Kind of Like Spitting's Ben Barnett on the guitar. The Thermals play with a joyous frenzy not unlike the idiosyncratic guitar driven indie-punk of the Wedding Present, with lyrics spewed forth from the same oblique etherland as Guided By Voices. More Parts Per Million has sold over 12,000 copies, and the vinyl has been out of print for years. Chris Walla of Death Cab For Cutie mixed the album at The Hall of Justice studio in Seattle, WA.
    1. It's Trivia
    2. Brace and Break
    3. No Culture Icons
    4. Goddamn the Light
    5. Out of the Old and Thin
    6. I Know the Pattern
    7. Time to Lose
    8. My Little Machine
    9. Overgrown, Overblown!
    10. A Passing Feeling
    11. Back to Gray
    12. Born Dead
    The Thermals
    $15.99
    Vinyl LP - Sealed Buy Now
  • Thermal Thermal Quick View

    $15.99
    Buy Now
    x

    Thermal

    Following last year's journeying Nun EP, Teengirl Fantasy returns with Thermal on Break World Records. Tracing threads from their previous deconstructed dancefloor works into thrilling new directions, the Thermal EP is the duo's most mature and cohesive work to date. It features four new songs: two instrumentals that showcase the duo's sensual and intuitive way with texture, and two prime-time vocal tracks featuring the new queen of underground Korean R&B, Hoody ( ), and rising NYC recording artist Lafawndah.
    1. Cavescape
    2. Lung feat. Lafawndah
    3. 7:30 AM
    4. U Touch Me feat. Hoody
    Teengirl Fantasy
    $15.99
    Vinyl LP - Sealed Buy Now
  • Desperate Ground Desperate Ground Quick View

    $17.99
    Buy Now
    x

    Desperate Ground

    180 Gram Vinyl LP


    Vinyl LP pressed at RTI


    Desperate Ground, the new LP from The Thermals, is exactly what the title implies. A
    dangerous path. A crucial moment. A split second in time when you must stand and defend,
    kill or be killed. Nowhere to run. Nowhere to hide.
    No problem!


    The Thermals' sixth LP and first for Saddle Creek, Desperate Ground, is a true scrappy and
    scratchy return-to-form for The Thermals, with all the raw power and unhinged adolescent
    energy that made their early LP's so insanely enjoyable. Lyrically, the album is a brash and
    irresponsible ode to human violence, a black celebration of the inevitability of war and death.


    A dark and yet joyous affair, Desperate Ground tells the (murky) tale of a lone rogue in the
    night. One man, one path, one sword. An unceasing urge to destroy. A never-ending battle
    against the forces of nature.  A destiny impossible to avoid. All told, Desperate Ground is a
    loud, violent thrill ride, a punk LP as bloody action film. It's The Wipers meets "Die Hard" and
    "Excalibur".


    Desperate Ground was produced by John Agnello (Dinosaur Jr, Sonic Youth) in Hoboken,
    NJ. Agnello and The Thermals completed mixing just hours before Hurricane Sandy ravaged
    New Jersey. Desperate Ground indeed.

    1 Born To Kill
    2 You Will Be Free
    3 The Sunset
    4 I Go Alone
    5 The Sword By My Side
    6 You Will Find Me
    7 Faces Stay With Me
    8 The Howl Of The Winds
    9 Where I Stand
    10 Our Love Survives
    Thermals
    $17.99
    180 Gram Audiophile Virgin Vinyl LP - Sealed Buy Now
  • Personal Life Personal Life Quick View

    $15.99
    Buy Now
    x

    Personal Life

    Over the course of seven years and four LP's, The Thermals have tackled religion, politics, and death with no small amount of passion and fervor. With their fifth LP, Personal Life, the band has battled (and perhaps even conquered!) the deepest and darkest of all popular art themes: love. The album amounts to the indie-rock equivalent of a brilliant but ultimately doomed love affair.


    Personal Life is something of a retro-technical achievement. Producer Chris Walla (Death Cab For Cutie, Tegan and Sara) recorded The Thermals the same way in which he produced their 2004 LP Fuckin' A. The sonic care Walla gave to Personal Life assures an enjoyable listen for audiophiles as the vinyl was mastered straight from tape.

    1. I'm Gonna Change Your Life
    2. I Don't Believe You
    3. Never Listen To Me
    4. Not Like Any Other Feeling
    5. Power Lies
    6. Only For You
    7. Alone, a Fool
    8. Your Love Is So Strong
    9. A Reflection
    10. You Changed My Life
    The Thermals
    $15.99
    Vinyl LP - Sealed Buy Now
  • Fuckin A Fuckin A Quick View

    $15.99
    Buy Now
    x

    Fuckin A

    The Thermals were formed in May of 2002 in Portland, OR. This crack three-member outfit released their
    debut album More Parts Per Million on Sub Pop after being brought to the label's attention by
    Ben Gibbard of the Postal Service and Death Cab for Cutie. Their second album, Fuckin A was recorded
    and mixed in all of four days at Avast Studios by Chris Walla, who shares Gibbard's Death Cab pedigree and has lent production duties to Hot Hot Heat, Nada Surf and many others. On this album the band retains their raw energy and charisma, while upping the fidelity ante significantly. In short, it is a perfect sophomore record.
    1. Our Trip
    2. Every Stitch
    3. How We Know
    4. When You're Thrown
    5. Remember Today
    6. A Stare Like Yours
    7. Let Your Earth Quake, Baby
    8. God And Country
    9. End To Begin
    10. Forward
    11. Keep Time
    12. Top Of The Earth
    13. Thank You Goodnight
    13. An Endless Supply
    The Thermals
    $15.99
    Vinyl LP - Sealed Buy Now
  • Why There Are Mountains Why There Are Mountains Quick View

    $16.99
    Buy Now
    x

    Why There Are Mountains

    Barsuk Records is pleased to reissue Cymbals Eat Guitars' stunning debut Why There Are Mountains on vinyl. Originally self released in 2009, Why There Are Mountains seemed to appear out of nowhere to massive critical acclaim (partially thanks to Pitchfork bestowing the album with the much coveted Best New Music designation) and took the indie-rock world by storm. The band spent the following year and a half touring the world and sharing the stage with Los Campesinos!, The Thermals, The Flaming Lips, The Hold Steady and more before releasing their Barsuk debut Lenses Alien in 2011.
    1. ...And the Hazy Sea
    2. Some Trees (Merritt Moon)
    3. Indiana
    4. Cold Spring
    5. Share
    6. What Dogs See
    7. Wind Phoenix (Proper Name)
    8. The Living North
    9. Like Blood Does
    Cymbals Eat Guitars
    $16.99
    Vinyl LP - Sealed Buy Now
  • Transistor Radio Transistor Radio Quick View

    $19.99
    Buy Now
    x

    Transistor Radio

    M. Ward describes Transistor Radio as a collection of songs "about childhood memories of a utopian radio power..." and dedicates the album to "the last of the remaining independent radio stations." Opening with a beautiful John Fahey-esque instrumental rendition of the Beach Boys' "You Still Believe in Me," Transistor Radio continues down a dusty well-worn road full of timeless, uniquely American stories. Ward's distinctly weathered voice and intricate guitar playing are helped along with an impressive group of guests incuding Jim James (My Morning Jacket), Jenny Lewis (Rilo Kiley), Howe Gelb (Giant Sand) and Jordan Hudson (The Thermals).
    1. You Still Believe in Me
    2. One Life Away
    3. Sweethearts on Parade
    4. Hi-Fi
    5. Fuel for Fire
    6. Four Hours in Washington
    7. Regeneration No. 1
    8. Big Boat
    9. Paul's Song
    10. Radio Campaign
    11. Here Comes the Sun Again
    12. Deep Dark Well
    13. Oh Take Me Back
    14. I'll Be Yr Bird
    15. Lullaby + Exile
    16. Well-Tempered Clavier


    Bonus Tracks On CD
    1. Just the Other Side of Nowhere (Kris Kristofferson cover) featuring Jim James (vocal, guitar)
    2. Lullaby + Exile (live) featuring Norah Jones (vocal)
    3. Here Comes the Sun Again (four-track)
    4. Paul's Song (instrumental) featuring Paul Brainard (pedal steel)

    M. Ward
    $19.99
    180 Gram Audiophile Virgin Vinyl LP + CD - Sealed Buy Now
  • Shiver + Shake Shiver + Shake Quick View

    $19.99
    Buy Now
    x

    Shiver + Shake

    Shiver + Shake was recorded and produced by esteemed Seattle producer Rick Parashar (Pearl Jam, Alice In Chains, Blind Melon) at London Bridge Studio.


    ""Cold Feet Killer" is one of the first and oldest My Goodness songs," singer/guitarist Joel Schneider explains to Purevolume.com. "I actually wrote the majority of the music on acoustic guitar before the band got its start. In a way it was one of the first few songs that ended up inspiring the creation of My Goodness."


    Consisting of Schneider and drummer Andy Lum, My Goodness formed in Seattle in 2008 and quickly took the Northwest by storm with their feverish concoction of blues-infused rock. The duo spent years honing their songwriting and playing to growing crowds with bands like Bosnian Rainbows, The Thermals, The Cave Singers and Augustines; all of which has led to this pivotal, career defining moment, the release of their new album, Shiver + Shake.


    My Goodness' connection to the Seattle music they grew up on is strikingly audible. Bands from Nirvana and Soundgarden, to bands from the early 00s Seattle scene such as Botch, Blood Brothers, Murder City Devils and Harkonen were on heavy rotation for Schneider and Lum throughout their formative years. Dig deeper still and you find them tapping into a rich seam of blues, old and new - from Muddy Waters through Junior Kimbrough and RL Burnside to the musical sass of Jon Spencer Blues Explosion. Though a very different prospect, the energy, intensity and attitude of hardcore and the groove of the blues feeds into everything My Goodness does. Ultimately it's all rock music though. Big throbbing rock music.
    In the spring of 2014, My Goodness enlisted the help of friend and local Seattle musician Cody Votalato (The Blood Brothers, Jaguar Love) who joined them as a part time member on bass guitar for their first full U.S. tour. Votalato will continue performing live with the band when possible.


    - Music Connection

    1. Shiver + Shake
    2. Sweet Tooth
    3. Back Again
    4. Pay No Mind
    5. Hangin' On
    6. Check Your Bones
    7. Cold Feet Killer
    8. Letter To The Sun
    9. Bottle
    10. Say You're Gone
    11. C'mon Doll
    12. Lost In The Soul
    13. Hot Sweat
    My Goodness
    $19.99
    Vinyl LP - Sealed Buy Now
  • The Feather Tipped The Serpent Scale (On Sale) The Feather Tipped The Serpent Scale (On Sale) On Sale Quick View

    $20.99 $14.69 Save $6.30 (30%)

    Buy Now
    x

    The Feather Tipped The Serpent Scale (On Sale)

    Includes bonus live track, "Ghosts of Eden," not on the CD version!

    Salt Lake City-based heavy rock duo Eagle Twin's sophomore LP is finally upon us! Once again, they have created a true masterpiece that will devastate forward-thinking riff-seekers everywhere! Entitled, The Feather Tipped The Serpent's Scale, the new Eagle Twin opus picks up right where the band's acclaimed debut, The Unkindess of Crows, left off.


    In this installment, the crows documented in the first album have battled the sun and were burned back down to earth as black snakes, the concept of the album continuing mainly on the snake and its various mythic and symbolic incarnations. Ultimately, the great ancestral snake is transformed from its lowly beginnings back into a bird soaring upon the thermals.


    Recorded with Randall Dunn at London Bridge Studio (as with the first album), the record boasts some of the most mesmerizing and monstrous riff transformations from Eagle Twin to date. Eagle Twin merges the talents of guitarist Gentry Densley (of legendary post-hardcore/jazz icons, Iceburn) with thunderous percussion of Tyler Smith (formerly of Form of Rocket).


    Following a cult split 7" with Night Terror in 2009, Eagle Twin's incredibly potent and unique multi-faceted approach became apparent to the world when their debut stormed doom and experimental music fans later that year. Limited edition double vinyl version from Southern Lord in Stoughton gatefold jacket which perfectly complements the amazing artwork.

    1. The Ballad of Job Cain Part 1
    2. The Ballad of Job Cain Part 2
    3. Lorca (Adan)
    4. Snake Hymn
    5. Horn Snake Horns
    6. It Came to Pass the Great Snake...
    7. Epilogue: Crow's Theology
    8. Ghosts of Eden (live) (bonus track)
    Eagle Twin
    $20.99 $14.69 Save $6.30 (30%)
    180 Gram Audiophile Virgin Vinyl LP - 2 LPs Sealed Buy Now
  • Keep It Safe Keep It Safe Quick View

    $18.99
    Buy Now
    x

    Keep It Safe

    In late 2012, Wild Ones was on the verge of collapse. Guitarist Clayton Knapp had blown out an eardrum, the band's original drummer left the group and his replacement, Seve Sheldon, was in the hospital with a punctured lung, practicing songs on a drum pad with a tube sticking out of his chest. The band's members had funneled all of their money into a debut record, Keep It Safe, that had taken a year to write and nine months to record and mix. Fans and followers began to wonder if that record would ever see the light of day. It was make-or-break time.


    Wild Ones made.


    Instead of folding in the face of financial drama, injuries and personnel changes, Wild Ones took a deep breath and adjusted to its new surroundings. This band is used to adjusting. Since its formation in 2010, Wild Ones has insisted on operating as a DIY collective. The band recorded and mixed its debut as a group (with help from engineer David Pollock). Sometimes considering each members' opinion meant endless revisits and tweaks to the album's tracks. The process was time-consuming, but it was also worth it. "That was a reaction to the bands we had been in before," says lead vocalist Danielle Sullivan. "This band was born out of our desire to have a democratic, all-inclusive music-making process."


    Going it alone-even the artwork on Keep It Safe was created by Wild Ones keyboardist Thomas Himes-comes with its fair share of challenges. Most of Wild Ones' debut was recorded in a two-story East Portland warehouse rehearsal space, where the band was surrounded on all sides by rock acts like Quasi and the Thermals. Wild Ones would get to their practice space around 8 am to record, often grabbing quick takes between thunderous drum solos from down the hall. "Somewhere on the record, if you listen close enough, you can probably hear the metal band next door," Himes says.


    "When we went in that room in March, it was raining," says Knapp. "When we finished recording in October, it was raining."


    Keep It Safe, the album that finally emerged after well over a year of gestation, is bigger than the sum of its meticulously gathered parts. Even now, the band's sound continues to evolve. Wild Ones' members come from vastly disparate musical backgrounds-guitarist Nick Vicario was a Portland punk icon long before he turned 18; bassist Max Stein is a classical composer-and all of their experiences inform pop music that is influenced by everything from german techno to American R&B. These are sounds that don't usually come packaged together, but in the able hands of Wild Ones, they seem like a perfectly natural fit.

    1. Golden Twin
    2. Curse Over Me
    3. Rivals
    4. 18 Mile Island
    5. It's Real
    6. Row
    7. Nina
    8. From Nothing
    9. Lion Heart
    10. Paia
    11. Keep It Safe

    Wild Ones
    $18.99
    Vinyl LP - Sealed Buy Now
  • Evolution 100A 2 COLORS AVAILABLE Evolution 100A Quick View

    $2,195.00
    Buy Now
    x

    Evolution 100A





    To maintain a family resemblance with the lower powered amplifier, the EVOLUTION 100A is housed in a similar slim case with engraved front panel and solid metal control knobs as the EVOLUTION 50A. It is available with either a Black or Silver brushed aluminium front panel and uses the same ingenious soft push button design as the EVOLUTION 50 series, offering excellent tactile feel and backlit optical indication of functions, for optimum user-friendliness.


    The front panel features a large OLED (Organic Light Emitting Diode) display. The white on black display provides higher clarity and resolution than a normal display and has a wide range of customised graphic symbols. Display brightness levels can be changed or turned-off, if not required, via the menu system.


    In addition to greatly increased performance, thanks to ingenious new circuit design, the EVOLUTION 100A has been equipped with 2 sets of high quality loudspeaker binding posts, with local and remote switching for A & B outputs. Optional extras include the ability to plug the Sequel mk2 Phono pre-amp inside and add the AMBIT FM/AM radio or RUBY DAC/Bluetooth/FM radio module to the expansion slot on the rear panel.


    At the heart of any high-end amplifier there must be a good power supply; The EVOLUTION 100A uses a massive 360 Watt, low profile, toroidal mains transformer, with multiple windings for high and low voltages and current, to separate the power amp, pre-amp and digital circuitry. Creek's long-standing design policy of paralleling several small capacitors in the power supply creates an ultra-high specification capacitor, with low inductance and ultra low impedance. This significantly improves filtering and helps produce a very powerful and accurate sound from such a relatively small amplifier.


    After testing several methods of building a high performance and high efficiency power amplifier, suitable for this new model, David Gamble - Creek Audio's Senior Engineer - created a unique Class G circuit especially for the EVOLUTION 100A. David chose to use four Sanken STD03 complimentary power Darlington transistors per channel, as used in the EVOLUTION 50A, which feature built-in thermal compensation. Compared to the EVOLUTION 50A, he improved the performance of the voltage gain circuitry, which, in combination with the output stage, now achieves extremely high open-loop gain and exceptionally low distortion, without sacrificing stability. The result is an exceptional power amplifier circuit with very low output impedance and high output current capability. This combination provides exceptional speed and control suitable for driving most loudspeakers.


    To increase the power output of the smaller EVOLUTION 50A, yet still retain the same case size, David Gamble developed a cunning Class G circuit which runs normally at a lower voltage for power levels up to 25 Watts into 8 Ohms. When required to produce more than 25 Watts, the amp automatically swings to a higher secondary voltage, to increase the output power capability to over 100 Watts into 8 Ohms.


    Statistically, average audio signals are mostly below half the maximum voltage swing available, which incidentally is only one quarter of the power. As the dissipation of lossy 'idle current' in a Class A/B amp (in the form of heat) is much lower for a 25 Watt amp than the potential 100 Watts in the EVOLUTION 100A, this solution dramatically improves the amplifier's thermal efficiency and helps to keep it slim and attractive.


    The Pre-amp circuit provides high levels of flexibility and control, via unbalanced or balanced inputs. It has multiple input options, switched either electronically or by gold contact relays. It also has a State-of-the-Art electronic Volume, Balance and Tone controls. Volume control and op-amp circuit outputs are all buffered with constant current sources, to provide improved load tolerance and stable distortion characteristics.


    Correct grounding is difficult, if not impossible, in an un-balanced amplifier, so Creek has provided the consumer with a balanced line input for both the pre-amp and power amp input. In addition, the optional RUBY DAC module also benefits from having a dedicated balanced audio connection to the EVOLUTION 100A's pre-amp, via its flat foil cable, to avoid potential ground loops inside the amplifier.


    It is a modern listening trend for headphones to now be fed from low voltage sources, such as smart-phones and portable music storage devices. This required the development of low impedance headphones, to draw the required current to make them loud enough to satisfy the consumer. This trend has also necessitated a re-think of circuitry used in modern Hi-Fi amplifiers, to drive such low impedance headphones, together with the traditional medium to high impedance versions also.


    Creek Audio has taken the unusual step of driving the headphone output socket of their EVOLUTION amplifiers from a dedicated low impedance source. Instead of the headphone output being sourced from the power amplifier, the headphone output is derived from a dedicated amplifier, with only a few Ohms in series for protection against short circuits. This dedicated HP amp is now located on the pre-amplifier circuit board.


    Creek Audio no longer makes a separate FM Tuner, but die-hard analogue tuner fans can continue to enjoy this valuable format by using the top-quality AMBIT plug-in tuner module, which augments the EVOLUTION 50A and 100A's capabilities. The AMBIT or RUBY modules are mounted on the back panel 'Smart-Slot', replacing Line Input 5. When the AMBIT is fitted, it automatically turns the amp into a Receiver, configurable for use in any region of the world. The OLED display shows all the tuner's functions and it's controlled by the left hand buttons and control knobs, as well as remote control.


    For vinyl fans, the EVOLUTION 100A can also be configured for Vinyl Disc input, using Line input 1. A SEQUEL 2 (40, 48 or 54) module can be plugged into a dedicated connector on the pre-amp PCB. It doesn't restrict the use of either the AMBIT or RUBY modules. Sequel 2 comes in three versions - 40dB MM, 48dB MC and 54dB MC.


    To simplify the many options a stylish system remote handset controls all the functions of the EVOLUTION 50 and 100 series. An optional IR extender to enable the products to be hidden away, but still operable via remote control.


    The EVOLUTION 100A is the most sophisticated and reasonably priced amplifier Creek has ever made. It provides stunning audio performance and is capable of out-performing other makes of amplifiers costing many times the price.


    This product is not eligible for discount.


    Creek Audio
    $2,195.00
    Integrated Amplifier
    Buy Now
  • Rega Elex-R Amplifier Rega Elex-R Amplifier Quick View

    $1,695.00
    Buy Now
    x

    Rega Elex-R Amplifier

    40th



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The Elex-R is a sublime blend of the Brio-R design with the power circuits and advanced phono stage of the Elicit-R. Rega's engineers have achieved the perfect balance of power, control and dynamics, delivering a performance that always puts the music first.


    You will find plenty of connectivity options allowing complete flexibility and integration within the rest of the Rega range.


    Design Innovation


    The Elex-R is built to the highest standard and designed to deliver the best possible audio performance whilst remaining simple to use and easy to setup.The Elex-R is built into the full width Rega case with increased heat dissipation, which along with a larger transformer enables the Elex-R to deliver 90 Watts per channel into 6 and 72.5 Watts per channel into a design centre rating of 8.


    Our time, effort & money have been spent on developing the circuit and construction utilizing the highest specification of components throughout. As part of the design we have included useful features like pre-amplifier output, to enable the new Elex-R amplifier to be used in a wide combination of systems and have avoided superfluous gadgets such as tone controls or a headphone socket as they can obstruct the signal path and degrade the produced sound quality.


    The Elex-R has been built to Rega's extremely high standards of reliability and quality to ensure many years of musical enjoyment. The primary function of an amplifier is to boost and equalize the low level signal generated by a phono cartridge, DAC and CD player or other source component to a level that can drive the loudspeakers. It is vital that the amplifier achieves this whilst minimising distortion, as this would directly affect the music. The distortion level is typically 0.007%; just under the clipping of the output.


    The volume control and pre-amplifier used in the Elex-R is designed to overcome the problems associated with the standard arrangement. This design uses a custom chip along with peripheral support IC's like a microcontroller and a custom made rotary volume control.


    The Elex-R uses a combined feedback and passive volume control, where the feedback and input levels are varied to set the required volume level. The level and tracking between the two channels is set by the close tolerance parts in the pre-amplifier circuit and less by the actual potentiometer itself, thus keeping the mismatch of channels due to volume control tracking irregularities to a minimum.As well as keeping tracking irregularities to a minimum, this method also reduces noise and input overload as the control will only 'use' the required gain to amplify the signal.This form of volume control is normally only found in professional broadcast environments where accurate low noise control of levels is required.


    Power Amplifier Technology


    The output amplifier used in the Elex-R, Elicit-R and Brio-R was born after extensive research by our engineers to develop a low source impedance emitter follower Class-A driver stage. This is based around a complementary pair of 150w Sanken Darlington output transistors. The technical and sonic improvement gained by the use of low impedance drivers is well known, however, it can feature high standing currents in the driver stage when using standard transistor configurations. By combining the low impedance driver with the Sanken Darlington transistors (with their imbedded thermal bias network running at a lower standing current) this combination forms a complementary emitter follower emulating Class-A conditions with good thermal stability with lower standing.


    Rega Integrated Amps
    $1,695.00
    Rega Elex-R Amplifier Buy Now
  • Audioengine A5+ Speakers (Bamboo) Audioengine A5+ Speakers (Bamboo) Quick View

    $469.00
    Buy Now
    x

    Audioengine A5+ Speakers (Bamboo)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Dynamic, well designed, and well made, the 5+ offers an elegant solution to the problem of choosing a high value desktop/nearfield monitor.

    - Steven Stone, Playback, AVGuide.com


    Premium Powered Bookshelf Speakers

    Audioengine 5+ (A5+) Premium Powered Speakers deliver audiophile-quality sound and features at a price that continues to set the standard for affordable high-quality audio. Connect your iDevice, computer, TV, or any other audio component for great stereo sound in any room.


    Affordable Audio

    The goal of Audioengine is to provide a high-end listening experience at affordable prices with easy to use, high-quality products. The Audioengine 5 powered speaker system was Audioengine's flagship model and has become a best seller. The new A5+ has the same award-winning signature sound as the original A5 but includes customer-requested upgrades and features.


    Versatile

    With custom Kevlar woofers, silk dome tweeters, and hand-built cabinets, the Audioengine 5+ includes a remote control, dual audio inputs and enhanced thermal management. You can charge your iDevice via the USB power port and also add a subwoofer to the variable output. Connect Audioengine 5+ to your computer's headphone jack or pair with a USB DAC to achieve an even higher level of sound quality. The Audioengine 5+ works with any computer and there's no software to install or settings to change.


    Easy Setup

    Built-in power amplifiers save space and eliminate the need to connect Audioengine 5+ to a stereo receiver or external power amp. Simply plug the left speaker into an AC outlet and connect the included speaker wire from the left to right speaker. All internal components of the A5+ are tuned together, providing a more efficient system requiring less power than passive speakers and amplifiers. With superior stereo separation and incredible imaging, A5+ has a clear sonic advantage over boomboxes or all-in-one systems.


    Small Speakers, Big Bass

    You won't hear any enhanced super-mega-hyper-monster boomy bass from these powered speakers. As with the original A5, the low end from the A5+ is real bass, very near to the originally-recorded music. From rap to classical to movies, you'll get tight, punchy bass with an awesome growl that will make you smile - regardless of the volume level.


    Hear the Difference

    The Audioengine 5+ Premium Powered Speaker System delivers the audio performance and aesthetic quality expected from Audioengine and continues to close the gap between your computer music and home hi-fi. Even if you're not an audio enthusiast we guarantee your music will sound better!


    Audioengine Speakers
    $469.00
    Audioengine A5+ Powered Bookshelf Speakers (Solid Carbonized Bamboo) Buy Now
  • Audioengine A5+ Speakers (Satin Black) Audioengine A5+ Speakers (Satin Black) Quick View

    $399.00
    Buy Now
    x

    Audioengine A5+ Speakers (Satin Black)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Dynamic, well designed, and well made, the 5+ offers an elegant solution to the problem of choosing a high value desktop/nearfield monitor.

    - Steven Stone, Playback, AVGuide.com


    Premium Powered Bookshelf Speakers

    Audioengine 5+ (A5+) Premium Powered Speakers deliver audiophile-quality sound and features at a price that continues to set the standard for affordable high-quality audio. Connect your iDevice, computer, TV, or any other audio component for great stereo sound in any room.


    Affordable Audio

    The goal of Audioengine is to provide a high-end listening experience at affordable prices with easy to use, high-quality products. The Audioengine 5 powered speaker system was Audioengine's flagship model and has become a best seller. The new A5+ has the same award-winning signature sound as the original A5 but includes customer-requested upgrades and features.


    Versatile

    With custom Kevlar woofers, silk dome tweeters, and hand-built cabinets, the Audioengine 5+ includes a remote control, dual audio inputs and enhanced thermal management. You can charge your iDevice via the USB power port and also add a subwoofer to the variable output. Connect Audioengine 5+ to your computer's headphone jack or pair with a USB DAC to achieve an even higher level of sound quality. The Audioengine 5+ works with any computer and there's no software to install or settings to change.


    Easy Setup

    Built-in power amplifiers save space and eliminate the need to connect Audioengine 5+ to a stereo receiver or external power amp. Simply plug the left speaker into an AC outlet and connect the included speaker wire from the left to right speaker. All internal components of the A5+ are tuned together, providing a more efficient system requiring less power than passive speakers and amplifiers. With superior stereo separation and incredible imaging, A5+ has a clear sonic advantage over boomboxes or all-in-one systems.


    Small Speakers, Big Bass

    You won't hear any enhanced super-mega-hyper-monster boomy bass from these powered speakers. As with the original A5, the low end from the A5+ is real bass, very near to the originally-recorded music. From rap to classical to movies, you'll get tight, punchy bass with an awesome growl that will make you smile - regardless of the volume level.


    Hear the Difference

    The Audioengine 5+ Premium Powered Speaker System delivers the audio performance and aesthetic quality expected from Audioengine and continues to close the gap between your computer music and home hi-fi. Even if you're not an audio enthusiast we guarantee your music will sound better!


    Audioengine Speakers
    $399.00
    Audioengine A5+ Powered Bookshelf Speakers (Satin Black) Buy Now
  • Audioengine A5+ Speakers (Hi-Gloss White) Audioengine A5+ Speakers (Hi-Gloss White) Quick View

    $399.00
    Buy Now
    x

    Audioengine A5+ Speakers (Hi-Gloss White)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Dynamic, well designed, and well made, the 5+ offers an elegant solution to the problem of choosing a high value desktop/nearfield monitor.

    - Steven Stone, Playback, AVGuide.com


    Premium Powered Bookshelf Speakers

    Audioengine 5+ (A5+) Premium Powered Speakers deliver audiophile-quality sound and features at a price that continues to set the standard for affordable high-quality audio. Connect your iDevice, computer, TV, or any other audio component for great stereo sound in any room.


    Affordable Audio

    The goal of Audioengine is to provide a high-end listening experience at affordable prices with easy to use, high-quality products. The Audioengine 5 powered speaker system was Audioengine's flagship model and has become a best seller. The new A5+ has the same award-winning signature sound as the original A5 but includes customer-requested upgrades and features.


    Versatile

    With custom Kevlar woofers, silk dome tweeters, and hand-built cabinets, the Audioengine 5+ includes a remote control, dual audio inputs and enhanced thermal management. You can charge your iDevice via the USB power port and also add a subwoofer to the variable output. Connect Audioengine 5+ to your computer's headphone jack or pair with a USB DAC to achieve an even higher level of sound quality. The Audioengine 5+ works with any computer and there's no software to install or settings to change.


    Easy Setup

    Built-in power amplifiers save space and eliminate the need to connect Audioengine 5+ to a stereo receiver or external power amp. Simply plug the left speaker into an AC outlet and connect the included speaker wire from the left to right speaker. All internal components of the A5+ are tuned together, providing a more efficient system requiring less power than passive speakers and amplifiers. With superior stereo separation and incredible imaging, A5+ has a clear sonic advantage over boomboxes or all-in-one systems.


    Small Speakers, Big Bass

    You won't hear any enhanced super-mega-hyper-monster boomy bass from these powered speakers. As with the original A5, the low end from the A5+ is real bass, very near to the originally-recorded music. From rap to classical to movies, you'll get tight, punchy bass with an awesome growl that will make you smile - regardless of the volume level.


    Hear the Difference

    The Audioengine 5+ Premium Powered Speaker System delivers the audio performance and aesthetic quality expected from Audioengine and continues to close the gap between your computer music and home hi-fi. Even if you're not an audio enthusiast we guarantee your music will sound better!


    Audioengine Speakers
    $399.00
    Audioengine A5+ Powered Bookshelf Speakers (Hi-Gloss White) Buy Now
  • Evolution 50A V2 2 COLORS AVAILABLE Evolution 50A V2 Quick View

    $1,195.00
    Buy Now
    x

    Evolution 50A V2





    Creek Audio has a long history of making fine sounding Phono pre-amplifiers.


    This new amplifier forms part of the next generation EVOLUTION 50 range of products. Housed in a slim case with engraved front panel and solid
    control knobs, it's finished in either black or silver brushed aluminium. An ingenious new push button design has been developed for it, offering excellent tactile feel and backlit optical indication of usable functions for optimum user-friendliness.


    The 50 series is the first Creek product to feature an OLED (Organic Light Emitting Diode) display. This white on black display provides higher clarity and resolution than a normal display and offers a wide range of customised graphic symbols. Display brightness levels can be changed or turn off when not required via the menu system.


    At the heart of any good amplifier lies a good power supply; The EVOLUTION 50A uses a massive 200 Watt toroidal mains transformer with separate windings for high and low current analogue and digital circuitry. This produces a good power to weight ratio and low magnetic interference. Creek's policy of paralleling several low impedance capacitors together, to create an ultra-high specification capacitor, to smooth the DC also helps to produce a very powerful and accurate sound from such a relatively small amplifier.


    Creek's Senior Engineer - David Gamble - who has much experience in the audio industry developed a completely new bi-polar transistor power amplifier circuit especially for the EVOLUTION 50A with very high open-loop gain and low distortion. Featuring a pair of Sanken 15 Amp power transistors, with built-in thermal compensation for rapid bias tracking performance, the Power Amplifier circuit has very low output impedance and can produce high output current. This combination will provide exceptional speed and control with most loudspeakers.


    David also developed a completely new analogue Pre-amp circuit, providing high levels of flexibility and control, via unbalanced or balanced inputs. It has multiple input options, switched electronically or via gold contact relays, plus electronic Volume, Balance and Tone controls. For Vinyl fans, a Sequel 2 Phono pre-amp can be plugged-in, substituting Line Input 1 for Phono. In addition, Line input 5 is located on a Smart- Slot removable panel. Should the user want to fit a Tuner or DAC module, Line 5 input can be removed and replaced by either the AMBIT tuner or RUBY module.


    Creek Audio no longer makes a separate EVOLUTION Tuner, but die-hard analogue tuner fans can continue to listen using the top quality AMBIT plug-in tuner module, which augments the EVOLUTION 50A's capabilities. The AMBIT and Ruby modules can be mounted to the back panel 'Smart-Slot', replacing Line Input 5. When the AMBIT is fitted, it automatically turns the amp into a Receiver, suitable for use in every region of the world. The OLED shows tuner functions and buttons and knobs have dual functions.


    The EVOLUTION 50A can also be configured for Vinyl Disc input, in place of Line input 1. The SEQUEL 2 module plugs into dedicated connectors on the pre-amp PCB and can run simultaneously with the AMBIT or RUBY. It comes in three versions - 40dB - 48dB and 54dB MM and MC.


    To simplify the many options a stylish new system remote handset has been developed to control all the functions of the EVOLUTION 50 range. The EVOLUTION 50 range also features an optional IR extender to enable the products to be hidden away, but still operable via remote control.


    This product is not eligible for discount.


    Creek Audio
    $1,195.00
    Integrated Amplifier
    Buy Now
  • Marantz MM7055 Amplifier Marantz MM7055 Amplifier Quick View

    $1,199.00
    Buy Now
    x

    Marantz MM7055 Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Power For Your System

    The MM7055 power amplifier produces 140 watts of high current output from each of its five channels. This is "real world" power, too, measured across the full audio bandwidth (20 Hz - 20 kHz) at 8 ohms with 0.08% Total Harmonic Distortion. Among other attributes, this means the MM7055 is capable of long-term power delivery into low impedance speakers.


    The Many Faces of Excellence

    In practical terms, the MM7055 is ideal for a "5.1" home theater system, whether based on a moderately powered receiver or a surround sound processor. You can use it to power speakers in different areas of your home; stereo reproduction in two rooms plus a mono channel for secondary areas such as a den or kitchen. For more complex home theater systems, the MM7055 pairs with one or several MM7025s to help create a totally immersive "7.1" or "9.1" audio experience.


    Inside The MM7055

    A massive power supply includes a multiple-secondary EI-core transformer and over 65,000 µF of custom-designed energy storage capacity. Critical circuit components from many world-class suppliers were chosen only after extensive listening tests. Among these, the LAPT Hyper Power output devices were first used in Reference Series components. Current feedback topology insures astounding accuracy and control under high-drive conditions.


    A Temperature-Controlled Environment

    Physically, the MM7055's output stages mount on an extruded aluminum "thermal tunnel" for efficient heat dissipation. With temperature-sensing forced air cooling, this configuration assures cool operating temperatures for long-term reliability, even when making full use of the amplifier's substantial output capabilities.


    Flexible Connections

    Balanced inputs and single-ended RCA inputs are both supported, and you can choose either type of input for each channel, individually, for easy and flexible connectivity. Audiophile grade, gold-plated four-way binding post speaker terminals insure tight connections to your choice of speaker wire.


    Custom Touches

    The MM7055 includes input and output jacks for DC "trigger" pulses as well as RC-5 jacks for total remote control convenience, even with legacy Marantz products.


    The chassis itself is heavy gauge steel for maximum isolation from external vibration as well as electromagnetic and radio frequency interference. And chassis depth is less than 14½" so the MM7055 will fit quite nicely on a shelf, in a cabinet, or in a conventional system rack with the optional rack mount kit RMK8003MM.


    Power. Functionality. Dependability. And classic looks. The MM7055 is, simply speaking, a Marantz.


    Marantz
    $1,199.00
    Power Amplifier Buy Now
  • Marantz MM7025 Amplifier Marantz MM7025 Amplifier Quick View

    $799.00
    Buy Now
    x

    Marantz MM7025 Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    First Impressions

    If you're impressed by elegantly restrained industrial design, the MM7025 is guaranteed to make a lasting - and very positive - impression. The subtly curved aluminum/glass resin front panel adds a sophisticated touch that complements any dÉcor. The central porthole display reflects iconic Marantz designs of the past while it brings you an "at a glace" view of the amplifier's operating status.


    Getting Connected

    Both single-ended RCA and balanced XLR inputs assure system compatibility regardless of your preamplifier or processor. For maximum flexibility, you can choose inputs independently for each channel.


    The MM7025's heavy duty, gold-plated, four-way binding posts accept virtually any choice of loudspeaker cable


    Your System, Your Way

    The MM7025 encourages various system configurations. Use one for dedicated two-channel listening, or use two to as zone amplifiers to power speakers in different rooms. Adding a new pair of loudspeakers to an existing home theater? - Get the most from your investment by adding an MM7025 as well. The exact configuration is up to you. Sound quality isn't - it's Marantz regardless of how you use this power amplifier.


    Marantz Sound Quality

    The MM7025's advanced technology serves all your listening needs. Current feedback circuits, also used in Marantz's Reference Series amps, insure the purest sonic reproduction regardless of source. Another MM7025 virtue, and one directly traceable to its substantial current capability, is the control it establishes over difficult speakers to reproduce both dynamic musical peaks and whispered dialog without blemish.


    The Power Supply

    As befits a Marantz amplifier, the high-capacity power supply begins with an oversized EI-core transformer feeding carefully chosen capacitors capable of storing 30,000 µF of energy. This combination instantaneously delivers peak power to all amplifier stages for distortion-free reproduction of the most complex sources.


    Output Devices

    In the final amplification stage, specially selected LAPT Hyper-Power output transistors, originally selected for Reference Series use, deliver fortissimo and pianissimo passages with equal aplomb. To make sure they're always operating at ideal temperatures, these transistors are mounted on a forced-air "thermal tunnel."


    Where Do I Put It?

    The MM7025 is less than 14" deep from front panel to rear speaker terminals. This lets you place the amplifier almost anywhere - in a cabinet or on a shelf. A detachable AC cord makes placement easy, even when there's little room and you can even rack mount it with the optional rack mount kit RMK8754MSP.


    Remote Control, Too

    You'll find rear panel connections for a "flasher" input that conveys On/Off commands from an infrared (IR) remote controller. There's a DC trigger input (and output) that lets you "daisy chain" one or several MM7025s to turn on and off in synchronization with your preamplifer or surround processor. If you're going to use the MM7025 with legacy Marantz products, there are RC-5 connectors to give you a level of operating convenience you might not have thought possible.


    Conclusion

    Refined looks. Flexible connectivity. Superb sound quality. Convenient operation. Yes, these Marantz attributes come together in the MM7025 Stereo Power Amplifier.


    It is, as are all Marantz products, devoted to one goal - satisfying your desire for an exceptional listening experience.


    Marantz
    $799.00
    Power Amplifier Buy Now
  • Crush (On Sale) Crush (On Sale) On Sale Quick View

    $16.99 $11.89 Save $5.10 (30%)

    Buy Now
    x

    Crush (On Sale)

    Those who clocked Abe Vigodas transition from the angular-punk of 2006's Kid City the startling tropicali-punk of 2008's Skeleton should know the LA quartet aren't ones for repeating themselves. To Skeletons hot-hot-hot template, they now add glassy shards of cold wave pop, with synthesizers, sequencers and altogether broodier beats. Scorching temperatures, icy currents, Crush is a thermal column of vertiginous brilliance!



    Just as Skeleton was difficult to define, Crush is a similar collision of sound, another helter-skelter joy ride through four boys private party. Even so, there was a thought process behind this new surge. In 2009, after the band released the Reviver EP, Dane Chadwick replaced drummer Gerado Guerreno, introducing a new style of regimented beats as well as other musical ideas to the table.

    1. Sequins
    2. Dream of My Love Chasing After You
    3. Throwing Shade
    4. Crush
    5. November
    6. Pure Violence
    7. Repeating Angel
    8. To Tears
    9. Beverly Slope
    10. We Have To Mask
    Abe Vigoda
    $16.99 $11.89 Save $5.10 (30%)
    Vinyl LP - Sealed Buy Now
  • Echobox Traveler T1 Earphones 4 COLORS AVAILABLE Echobox Traveler T1 Earphones Quick View

    $99.00
    Buy Now
    x

    Echobox Traveler T1 Earphones

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Professional Sound for way less.


    Using the highest quality materials and cutting edge engineering, the Traveler represents the perfect balance of powerful, authentic sound, and durability to withstand the wear and tear of rugged daily use.


    • German-made PEEK dynamic drivers
    • Modern design and variety of colors
    • Solid Titanium Housings
    • Enhanced noise isolation

    Audiophile Sound


    By tapping in to our unique German made PEEK diaphragms, the Traveler is designed to fully immerse you in a beautiful and powerful sonic experience. Deep, accurate bass and detailed, layered clarity on the mids and highs come together to present an uncompromising earphone worlds beyond its competition.


    Love Color


    Pablo Picasso once said that colors follow the changes of the emotions, and we agree. Featuring a variety of subtle, modern colors, find the right color to match your unique style.


    Titanium Housings


    Titanium has double the strength-to-weight ration of steel, rendering the Traveler's tiny housings virtually indestructible, yet impossibly light and comfortable.


    Serious Noise Isolation


    We get it, it's a loud world out there. It is for this very reason that we have partnered with the Minnesota based company Comply to offer a pair of medium T-400 Isolation Series memory foam tips standard with every Traveler. As you probably guessed, the Isolation Series are all about noise isolation. Using some serious technology, Comply tips use thermal reactive memory foam that works with your body's natural heat to seal the ear canal perfectly. Hear more of what you want to hear, not what you don't, and listen longer with a comfort normally reserved only for custom molded earphones.


    Echobox Audio
    $99.00
    Earphones - Apple or Android (4 Colors Available)
    Buy Now
  • CI Audio VHP-2 Headphone Amplifier CI Audio VHP-2 Headphone Amplifier Quick View

    $399.00
    Buy Now
    x

    CI Audio VHP-2 Headphone Amplifier



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The VHP•2 improves over our VHP•1 with a new potentiometer, 2 oz. copper circuit board, silver solder construction and select upgraded internal components.


    New and Improved


    Our new VHP•2 is an improved version of our highly acclaimed VHP•1. Improvements include a new ALPS® Blue Velvet potentiometer, 2 oz. copper circuit board with silver solder construction, and a handful of upgraded internal components. As before, it is a versatile studio quality headphone amplifier for use with most any headphones.


    Audio Circuit


    Unlike most amplifiers, it uses a unique current-feedback circuit rather than opamps, and is optimized for a wide range of load impedances (30-700 ohms). This high bandwidth, extremely low noise design yields greater than 120 dB of dynamic range and exceeds the capabilities of the human ear, ensuring that nothing audible is lost due to the amplifier.
    Current-on-demand at the output enables the amplifier to respond quickly and linearly when necessary without risk of output distortion. When large amounts of output power are suddenly needed, the amplifier can respond extremely quickly without raising the noise floor of the system and degrading the signal-to-noise performance, and the high slew rate prevents odd order distortion.


    Headphone Swiss Army Knife


    Two gain settings, selectable by a convenient front panel switch, allow for quick and easy optimization for high or low-efficiency headphones. Other features include Short Circuit and Thermal protection, looped-through output jacks and external 14vAC power supply.


    1 Year Parts & Labor Warranty


    CI Audio
    $399.00
    VHP-2 Headphone Amplifier Buy Now
  • Echobox Nomad N1 Earphones 2 VERSIONS AVAILABLE Echobox Nomad N1 Earphones Quick View

    $399.00
    Buy Now
    x

    Echobox Nomad N1 Earphones

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The New Flagship


    The Nomad represents the evolution of sonic achievement. It delivers honest, dynamic, uncompromising sound, masterfully engineered using German-made PEEK drivers. It is paired with our unique Acoustic-Filter-Tuning (AFT) system which enables you to discover the sound you love. Ergonomically designed Titanium housings featuring an over-ear cable wear style ensure the most comfortable and secure fit available, and replaceable MMCX compatible cables allow for the freedom of selection from a variety of wired and wireless cable options.


    • German-made PEEK dynamic drivers
    • Replaceable cables with MMCX connectors
    • AFT Sound customization system
    • Ergonomic design for enhanced comfort
    • Solid Titanium Housings

    Dynamic Hi-Fi


    When we debuted the Finder X1, we introduced the world to the capabilities of our new PEEK dynamic driver. After a year of experimenting and perfecting the technology, we have taken its potential to a whole new level. Powerful and accurate bass response, layered and engaging mids, and radiant, detailed highs come together in a breathtaking new dynamic masterpiece.


    Universal Comfort


    Featuring an ergonomic design and replaceable MMCX (micro-miniature coaxial) cables, the Nomad has been meticulously designed for comfort and practicality. Shipping stock with your cable of choice, the MMCX connecter allows you to swap between a wide array of differing cable styles including iPhone and Android microphone versions, Lightning, USB-C and Bluetooth. In essence, the Nomad is a truly universal HiFi earphone: simply swap cables instead of purchasing separate earphones to match your different device output jacks and lifestyle demands.


    Custom Sound


    Originally debuted with the Finder X1, our signature Acoustic Filter Tuning (AFT) System allows users to customize the sound of their earphone to match their own unique preference. Three sets of AFT filter rings are included with the Nomad: Bass (Black), Reference (Silver) and Treble (Red).


    Serious Noise Isolation


    We get it, it's a loud world out there. It is for this very reason that we have partnered with the Minnesota based company Comply to offer a pair of medium T-400 Isolation Series memory foam tips standard with every Nomad. As you probably guessed, the Isolation Series are all about noise isolation. Using some serious technology, Comply tips use thermal reactive memory foam that works with your body's natural heat to seal the ear canal perfectly. Hear more of what you want to hear, not what you don't, and listen longer with a comfort normally reserved only for custom molded earphones.


    Echobox Audio
    $399.00
    Earphones (2 Versions Available)
    Buy Now
  • 1
  • 2
Go to top