Vinyl. Our way of life since 2004 (877) 929-8729

VPI Dealer Authorized & Certified
Site Search
Menu Free shipping on domestic orders over $49.99! - We ship worldwide!
LP20 - 20% Off Vinyl
Home > Products for: '

Speaker Cable

'
Results per page:
  • AudioQuest Rocket 33 Speaker Cable MULTIPLE LENGTHS AVAILABLE AudioQuest Rocket 33 Speaker Cable Quick View

    $210.00
    Buy Now
    x

    AudioQuest Rocket 33 Speaker Cable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Full Range Termination with Banana (Silver) Plug*


    Custom Lengths Available Upon Request


    This Double Star-Quad Geometry "Rocket" cable does not look normal on the outside, and it is not at all normal on the inside. A sophisticated combination of extraordinary materials and extremely refined design allows the Rockets to honor all types of music equally.


    SOLID LONG-GRAIN COPPER/PERFECT-SURFACE COPPER (LGC/PSC) CONDUCTORS: Rocket 33 uses a carefully finessed combination of Long-Grain Copper and extremely high-purity Perfect-Surface Copper. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance. The astonishingly smooth and pure PSC further eliminates harshness and greatly increases clarity.


    CARBON-BASED NOISE-DISSIPATION and CROSS-TALK-DISSIPATION SYSTEMS (INSULATION): The four negative conductors in Rocket 33 are insulated with partially conductive Carbon-Loaded Polyethylene. This remarkable material damps radio-frequency garbage from being fed back into the amplifier. The sonic benefit is exactly the same reduction in "hash" and better dimensionality that comes whenever RF garbage is reduced in an audio circuit. Rocket 33 uses Nitrogen-Injected Foamed-Polyethylene Insulation on its positive conductors because air absorbs next to no energy, and Polyethylene is low-loss with a benign distortion profile. Thanks to all the air in Foamed-Polyethylene Insulation, it causes much less of the "out-of-focus" effect common to other materials.


    DOUBLE STAR-QUAD GEOMETRY: The relationship between conductors defines a cable's most basic electrical values (capacitance and inductance). However, even when those variables are kept in a reasonable balance, the relationship between conductors can be varied in ways that greatly affect the sound. The Double Star-Quad construction of Rocket 33 allows for significantly improved dynamic contrast and intelligibility compared to parallel conductors.


    SPREAD-SPECTRUM TECHNOLOGY (SST): Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid or tubular) have the fewest discontinuities, any conductor of a particular size does have a sonic signature. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different sized conductors. The different SST-determined conductor sizes used in Rocket 33 allow an exceptionally clear, clean and dynamic sound.


    *Different Terminations & Multi-Spade Plug Options Available Upon Request


    AudioQuest
    $210.00
    Prepared Speaker Cable (Pair) - Multiple Lengths Available
    Buy Now
  • AudioQuest Castle Rock Speaker Cable MULTIPLE LENGTHS AVAILABLE AudioQuest Castle Rock Speaker Cable Quick View

    $1,000.00
    Buy Now
    x

    AudioQuest Castle Rock Speaker Cable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Full Range Termination with Banana (Silver) Plug*


    Custom Lengths Available Upon Request


    RIP Gibraltar, long live Castle Rock! Like Gibraltar before it, Castle Rock is designed as an
    extremely high-performance cable which provides true Double-BiWire performance in a single
    attractive cable. Original Gibraltar's all important basics - superior geometry, magnetic
    autonomy of each quad-conductor section, Perfect-Surface metal technology, conductor-size
    optimization (AQ's Spread-Spectrum Technology), etc. - are the fundamentals of Castle Rock.
    Castle Rock employs AQ's best copper conductor metal (Perfect-Surface Copper+),
    AudioQuest's DBS (Dielectric-Bias System) and NDS (Noise-Dissipation System).


    A very recent advancement featured in Castle Rock (and all other Tree and Rock Series speaker
    cables) is the addition of the sleek new Hanging Silver 1000 Series Multi-Spades and Bananas.
    Originally developed for the WEL Signature Series speaker cables, these plugs are made using a
    Hanging Silver over pure Red Copper process in which the spades and bananas are submerged
    ("hung") into a vat of extreme-purity silver, resulting in a very thick direct-silver plate. No
    intermediary performance-degrading materials (such as nickel or alloy) are used.


    Also new to Castle Rock is a more-neatly-sculpted "breakout" (the covering where the cable
    separates into red and black legs), which is now made of a synthetic non-magnetic polymer,
    rather than metal. We're making this all-models upgrade because speaker cables and AC power
    cables carry large magnetic fields which interact with any metal "collar" around the cable.
    Eliminating metal in the breakouts is another significant (and clearly audible) step forward in our
    goal of eliminating distortion and making the cable sonically invisible.


    Castle Rock represents the culmination of Gibraltar's long-term evolution along with
    performance-enhancing new systems and materials. These ingredients add up to important
    audible improvements and more pleasurable listening!


    *Different Terminations & Multi-Spade Plug Option Available Upon Request


    AudioQuest
    $1,000.00
    Prepared Speaker Cable (Pair) - Multiple Lengths Available
    Buy Now
  • Chord Odyssey Speaker Cables (3 Meter) Chord Odyssey Speaker Cables (3 Meter) Quick View

    $425.00
    Buy Now
    x

    Chord Odyssey Speaker Cables (3 Meter)

    2005



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Chord Odyssey speaker cable shares its principal design features with Chord Rumour. Like Rumour, each conductor is made up of 19 strands of silver-plated oxygen free copper surrounded by PTFE insulation. However, the strands are of a heavier gauge and whereas Rumour uses 1.5mm overall diameter conductors, Odyssey uses 2mm overall diameter conductors.


    The larger diameter conductors help Odyssey to carry dynamic information extremely well and this produces real improvements to the weight, attack and dynamic of notes across the entire frequency range. Cymbals are noticeably more realistic and acoustic guitars and pianos more lifelike; this ability to carry dynamic information so well means that Odyssey produces a remarkably musical and coherent sound. This, combined with Odyssey's neutral tonality, helped it to win the Hi-fi News Best Speaker Cable award for five years in a row.


    Chord Company
    $425.00
    Chord Odyssey Speaker Cable with banana - 3 Meter Pair Buy Now
  • 8TC Speaker Cables MULTIPLE OPTIONS AVAILABLE 8TC Speaker Cables Quick View

    $275.00
    Buy Now
    x

    8TC Speaker Cables

    Editor's


    Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Having used 8TC for many years through countless changes in equipment and rooms, I can personally vouch for its versatility and benefits: great neutrality, transparency, and musicality, and a comfortable fit with amplifiers that never causes them distress.

    - Paul Seydor, The Absolute Sound


    Consisting of sixteen individual TCSS conductors, eight clear and eight white, arranged in a large format braid. Individual conductors are Hyper-pure copper and utilize our proven VariStrand conductor geometry. The insulating dielectric is a high pressure, low temperature extruded fluorocarbon. The aggregate wire size is two 9 awg conductors. By virtue of its full, accurate and dimensional sound, 8TC ranks as one of the best high-end audio values of all time and without question is the best sounding moderately priced cable on the market.


    Kimber Kable
    $275.00
    8TC Speaker Cables - Multiple Options Available
    Buy Now
  • Chord Signature Jumper Chord Signature Jumper Quick View

    $175.00
    Buy Now
    x

    Chord Signature Jumper


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Chord Signature speaker links are designed to replace the gold-plated links that are often used to connect the inputs together on bi-wireable speakers. The design is based closely on the Chord Signature speaker cable but Signature links will work with any speaker cable.


    Signature links are built from a high quality multi-stranded cable and are fitted with Chord 24 karat gold-plated banana plugs and direct gold-plated copper spade connectors. They are simple and easy to fit.


    Replacing the gold-plated links can bring startling improvements to sound quality, particularly in terms of timing and coherence and Signature links will allow you to experience the best possible performance from both your speakers and your speaker cable.


    Chord Company
    $175.00
    Chord Signature Speaker Links - Set of 4 Jumpers (Spade to Banana) Buy Now
  • 4PR Speaker Cables MULTIPLE OPTIONS AVAILABLE 4PR Speaker Cables Quick View

    $66.00
    Buy Now
    x

    4PR Speaker Cables

    Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    In 1979 this classic design put Kimber Kable on the map and after improvements over time, is still considered the reference for affordable loudspeaker cables. Millions of feet of this remarkable cable have been sold. The construction consists of four brown and four black conductors that utilize our proven braiding technique. The aggregate wire size is two 14 awg conductors. Even the most basic systems, old and new, will benefit significantly from this legendary performer. When demonstrating Kimber Kable to a new dealer this cable is used with the most modest system available. With 4PR, the system performs as if costing twice as much. Bass and treble frequencies are allowed their full extension, while dynamics emerge unrestrained. The 4PR is also an excellent cable for professional and studio use due to its inherent ability to reject noise in any cable length.


    Kimber Kable
    $66.00
    4PR Loudspeaker Cables - Multiple Options Available
    Buy Now
  • 4VS Speaker Cables MULTIPLE OPTIONS AVAILABLE 4VS Speaker Cables Quick View

    $82.50
    Buy Now
    x

    4VS Speaker Cables

    Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Consisting of four gray and four black conductors that utilize our proven braiding technique. The aggregate wire size is two 13 awg conductors. The VariStrand, Ultra-pure copper conductor used in 4VS shares many similarities with the more advanced TC series cable. 4VS is smooth and refined in the midrange and treble, allowing for hours of fatigue-free performance without sacrificing detail. One of the audio world's finest performance bargains.



    Kimber Kable
    $82.50
    4VS Speaker Cables - Multiple Options Available
    Buy Now
  • 12TC Speaker Cables MULTIPLE OPTIONS AVAILABLE 12TC Speaker Cables Quick View

    $435.00
    Buy Now
    x

    12TC Speaker Cables

    Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The aggregate wire size is two 8 awg conductors. The tonal balance of 12TC is full, rich and powerful while the musical impact and dynamics reveal three-dimensionality and imaging. Although you may notice increased low end performance, the midrange and high frequencies are clear and detailed exhibiting coherency and realism.



    Kimber Kable
    $435.00
    12TC Speaker Cables - Multiple Options Available
    Buy Now
  • Chord Odyssey Speaker Cables (5 Meter) Chord Odyssey Speaker Cables (5 Meter) Quick View

    $585.00
    Buy Now
    x

    Chord Odyssey Speaker Cables (5 Meter)

    2005



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Chord Odyssey speaker cable shares its principal design features with Chord Rumour. Like Rumour, each conductor is made up of 19 strands of silver-plated oxygen free copper surrounded by PTFE insulation. However, the strands are of a heavier gauge and whereas Rumour uses 1.5mm overall diameter conductors, Odyssey uses 2mm overall diameter conductors.


    The larger diameter conductors help Odyssey to carry dynamic information extremely well and this produces real improvements to the weight, attack and dynamic of notes across the entire frequency range. Cymbals are noticeably more realistic and acoustic guitars and pianos more lifelike; this ability to carry dynamic information so well means that Odyssey produces a remarkably musical and coherent sound. This, combined with Odyssey's neutral tonality, helped it to win the Hi-fi News Best Speaker Cable award for five years in a row.


    Chord Company
    $585.00
    Chord Odyssey Speaker Cable with banana - 5 Meter Pair Buy Now
  • Marantz PM8005 Integrated Amplifier Marantz PM8005 Integrated Amplifier Quick View

    $1,199.00
    Buy Now
    x

    Marantz PM8005 Integrated Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Integrated Amplifier With Power Amp Direct Input


    Combining fully discrete current feedback circuitry and our exclusive HDAM technology, the Marantz PM8005 integrated stereo amplifier delivers audiophile grade sound quality along with system operational flexibility. Rated at 70 watts per channel into 8 ohms, the PM8005 features a robust power supply along with high current capability to deliver 100 watts per channel into 4 ohms, for compatibility and operational stability with the widest range of loudspeakers.


    The versatile pre-amp section features 6 line level inputs including a phono (MM) input, and the PM8005 also includes pre-amp outputs along with a power amp direct input, which lets you use the unit as a standalone power amplifier for integration into a multi-channel home theater system. For precise sound tailoring, the PM8005 features our triple tone control system, with separate controls for the bass, midrange and treble segments. The elegant remote control features an ergonomic layout for easy operation, and includes the ability to control our companion SA8005 disc player and one of our network players.


    Marantz HDAM Technology


    The PM8005 features our exclusive HDAM (Hyper Dynamic Amplifier Module) technology, which consists of precision discrete selected circuit elements on a compact sub-board, instead of conventional op-amp integrated circuits. Multiple HDAM units are employed, including HDAM-SA3 and HDAM-SA2 versions that provide gain and buffering functions, to deliver dynamic and detailed sound quality. The PM8005 features current feedback technology for ultra low distortion and wideband response, along with superb musicality.


    High Current Power Supply


    The robust power supply features a high current toroidal main power transformer that is rated at 625VA, to easily provide extra power to the amplifier stage in order to handle demanding short term peaks. High current Shottky barrier diodes in the rectification stage are rated at 20 amps, with the ability to handle up to 180 amps peak current, providing sufficient power reserve to handle virtually any loudspeaker load.


    Fully Discrete High Current Output Stages


    The PM8005 is equipped with multiple high speed, high current power output devices that are each rated at 14 amps of current output capability, providing a very high amount of dynamic headroom, along with compatibility with lower impedance loudspeakers. For optimum heat dissipation, the PM8005 is equipped with solid aluminum power amplifier heat sinks, with a combined total radiating area of 326 square inches, eliminating the need for fans. The PM8005 is conservatively rated at 70 watts per channel into 8 ohms, and 100 watts per channel into 4 ohms, for compatibility with the widest range of loudspeakers.


    Solid Chassis Construction


    For the utmost stability and protection from induced vibrations, the PM8005 features a rugged chassis design, which includes a triple layer bottom plate. To eliminate distortion from stray magnetic fields, the high current toroidal main power transformer features double shielding.


    Versatile Pre-Amplifier Functions


    There are 6 line level inputs, to handle a wide range of sources, including a dedicated phono input (MM) that features discrete topology to deliver the utmost fidelity from your favorite vinyl recordings, and all inputs and outputs are gold-plated for optimum signal transfer. The Source Direct function bypasses unnecessary circuit blocks for the straightest path from input to the speaker terminals. Pre-amp outputs let you connect a separate stereo power amplifier for a bi-amp loudspeaker system, or for playback in a separate room. The power amp direct input lets you connect the PM8005 to another component, such as a surround sound processor, for integration within a multi-channel home theater system.


    For precision tonal balancing, we've equipped the PM8005 with our Tri-Tone control system, with separate tone controls for the bass, midrange and treble bands, which lets you fine tune the spectral balance to your preference, and is especially useful with older recordings that suffer from tonal imbalance.


    Audiophile Grade Loudspeaker Terminals


    Equipped with premium audiophile grade loudspeaker terminals that are designed to accept a wide range of speaker cable termination types, the PM8005 also features A/B speaker switching for increased system configuration flexibility.


    System Remote Control


    The elegant, ergonomically designed remote control is equipped with additional functionality, which lets you control a companion Marantz disc player (such as our SA8005) and a Marantz network audio player. Remote control input and output jacks let you directly connect the PM8005 to other Marantz components for easy system control.


    The Marantz PM8005 integrated amplifier is backed by a limited three-year warranty.


    Marantz
    $1,199.00
    Marantz PM8005 Integrated Amp Buy Now
  • 8PR Speaker Cables MULTIPLE OPTIONS AVAILABLE 8PR Speaker Cables Quick View

    $105.00
    Buy Now
    x

    8PR Speaker Cables

    Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The construction consists of eight brown and eight black conductors, arranged in a large format braid. Individual conductors are high-purity copper. The aggregate wire size is two 10 awg conductors. 8PR provides a sound that is full bodied and powerful, making it ideal for subwoofers and the low frequency section of bi-wired speakers as well as full range applications.



    Kimber Kable
    $105.00
    8PR Loudspeaker Cables - Multiple Options Available
    Buy Now
  • 4TC Speaker Cables MULTIPLE OPTIONS AVAILABLE 4TC Speaker Cables Quick View

    $160.00
    Buy Now
    x

    4TC Speaker Cables


    Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Consisting of eight individual TCSS conductors, four clear and four white that utilize our proven braiding technique. The insulating dielectric is high pressure, low temperature extruded fluorocarbon. The individual conductors are Hyper-pure copper, arranged in proven Varistrand conductor geometry. The aggregate wire size is two 13 awg conductors. The focus, transparency and transient speed of 4TC are stunning. 4TC continues to receive enthusiastic reviews and recommendations from consumers and critics worldwide.



    Kimber Kable
    $160.00
    4TC Speaker Cables - Multiple Options Available
    Buy Now
  • AudioQuest Oak Speaker Cable MULTIPLE LENGTHS AVAILABLE AudioQuest Oak Speaker Cable Quick View

    $1,640.00
    Buy Now
    x

    AudioQuest Oak Speaker Cable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Full Range Termination with Banana (Silver) Plug*


    Custom Lengths Available Upon Request


    The mighty Oak is known for its strength and endurance, which are also qualities found in this speaker cable.


    SOLID PERFECT-SURFACE COPPER+ (PSC+) CONDUCTORS: Oak uses extremely high-purity Perfect-Surface Copper+ Conductors. All conductors are solid, which prevents strand interaction, a major source of distortion. Surface quality is critical because a conductor can be considered as a rail-guide for both the electric fields within a conductor, and for the magnetic fields outside the conductor. The astonishingly smooth and pure Perfect-Surface eliminates harshness and greatly increases clarity compared to OFHC, OCC, 8N and other coppers. The superior purity of PSC+ further minimizes distortion caused by grain boundaries, which exist within any metal conductor.


    CARBON-BASED MULTI-LAYER NOISE-DISSIPATION and CROSS-TALK-DISSIPATION SYSTEM (INSULATION): The negative conductors in Oak are insulated with partially conductive Carbon-Loaded Polyethylene. This remarkable material damps radio-frequency garbage from being fed back into the amplifier. The sonic benefit is exactly the same reduction in "hash" and better dimensionality that comes whenever RF garbage is reduced in an audio circuit. Oak uses Nitrogen-Injected Foamed-Polyethylene Insulation on its positive conductors because air absorbs next to no energy, and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.


    DIELECTRIC-BIAS SYSTEM (DBS, US Pat #s 7,126,055 & 7,872,195 B1): All insulation slows down the signal on the conductor inside. When insulation is unbiased, it slows down parts of the signal differently, a big problem for very time-sensitive multi-octave audio. AudioQuest's DBS creates a strong, stable electrostatic field which saturates and polarizes (organizes) the molecules of the insulation. This minimizes both energy storage in the insulation and the multiple nonlinear time-delays that occur. Sound appears from a surprisingly black background with unexpected detail and dynamic contrast. The DBS battery packs will last for years. A test button and LED allow for the occasional battery check.


    DOUBLE COUNTER-SPIRAL GEOMETRY: Oak and the other AQ "Tree Feature" cables have an inner circular array of positive conductors spiraling in one direction. Around this inner group are the negative conductors, spiraling in the opposite direction. Even while the positive and negative conductors are crossing each other instead of being parallel, the relationship between the positive and negative groups is fixed and non-changing, adhering to one of AudioQuest's most basic design tenets: consistency. The result is an astonishing clarity, like focusing a camera lens you had no idea was so far out of focus.


    SPREAD-SPECTRUM TECHNOLOGY (SST):Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid round or tubular) have the fewest discontinuities, any conductor of a particular size does have a sonic signature. SST uses a precise combination of different size conductors in order to significantly reduce the audibility of these character flaws. The different SST-determined conductor sizes used in Oak allow an exceptionally clear, clean and dynamic sound.


    *Different Terminations & Multi-Spade Plug Option Available Upon Request


    AudioQuest
    $1,640.00
    Prepared Speaker Cable (Pair) - Multiple Lengths Available
    Buy Now
  • AudioQuest Comet Speaker Cable MULTIPLE LENGTHS AVAILABLE AudioQuest Comet Speaker Cable Quick View

    $1,600.00
    Buy Now
    x

    AudioQuest Comet Speaker Cable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Full Range Termination with Banana (Silver) Plug*


    Custom Lengths Available Upon Request


    You won't have to wait 70 years to see this Comet. AudioQuest's Comet Double Star-Quad speaker cable utilizes a carefully finessed amount of Solid Perfect-Surface Copper+ and Perfect-Surface Silver Conductors. The addition of Silver is startling. Silver has a colorless sound, allowing the exposure of more textural nuances found in the recording.


    SOLID PERFECT-SURFACE COPPER+/PERFECT-SURFACE SILVER (PSC+/PSS) CONDUCTORS: Comet uses a carefully finessed combination of Perfect-Surface Copper+ and extremely high-purity Perfect-Surface Silver conductors. All conductors are solid, which prevents strand interaction, a major source of distortion. Surface quality is critical because a conductor can be considered as a rail-guide for both the electric fields within a conductor, and for the magnetic fields outside the conductor. The astonishingly smooth and pure Perfect-Surface eliminates harshness and greatly increases clarity compared to OFHC, OCC, 8N and other coppers. The superior purity of PSC+ and PSS further minimizes distortion caused by grain boundaries, which exist within any metal conductor.


    CARBON-BASED NOISE-DISSIPATION and CROSS-TALK DISSIPATION SYSTEMS (INSULATION): The negative conductors in Comet are insulated with partially conductive Carbon-Loaded Polyethylene. This remarkable material damps radio-frequency garbage from being fed back into the amplifier. The sonic benefit is exactly the same reduction in "hash" and better dimensionality that comes whenever RF garbage is reduced in an audio circuit. Comet uses Nitrogen-Injected Foamed-Polyethylene Insulation on its positive conductors because air absorbs next to no energy, and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.


    DIELECTRIC-BIAS SYSTEM (DBS, US Pat #s 7,126,055 & 7,872,195 B1): All insulation slows down the signal on the conductor inside. When insulation is unbiased, it slows down parts of the signal differently, a big problem for very time-sensitive multi-octave audio. AudioQuest's DBS creates a strong, stable electrostatic field which saturates and polarizes (organizes) the molecules of the insulation. This minimizes both energy storage in the insulation and the multiple nonlinear time-delays that occur. Sound appears from a surprisingly black background with unexpected detail and dynamic contrast. The DBS battery packs will last for years. A test button and LED allow for the occasional battery check.


    DOUBLE STAR-QUAD GEOMETRY: The relationship between conductors defines a cable's most basic electrical values (capacitance and inductance). However, even when those variables are kept in a reasonable balance, the relationship between conductors can be varied in ways that greatly affect the sound. The Double Star-Quad construction of Comet allows for significantly better dynamic contrast and information intelligibility than if the same conductors were run in parallel.


    SPREAD-SPECTRUM GEOMETRY (SST): Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid or tubular) have the fewest discontinuities, any conductor of a particular size does have a sonic signature. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different size conductors. The different SST-determined conductor sizes used in Comet allow an exceptionally clear, clean and dynamic sound.


    *Different Terminations & Multi-Spade Plug Option Available Upon Request


    AudioQuest
    $1,600.00
    Prepared Speaker Cable (Pair) - Multiple Lengths Available
    Buy Now
  • AudioQuest K2 Speaker Cable MULTIPLE LENGTHS AVAILABLE AudioQuest K2 Speaker Cable Quick View

    $6,100.00
    Buy Now
    x

    AudioQuest K2 Speaker Cable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Full Range Termination with Banana (Silver) Plug*


    Custom Lengths Available Upon Request


    At the peak of AudioQuest's Flat Rock series sits K2. Just like the mountaintop, from this vantage point there are very few options to look up toward. K2 combines Solid Perfect-Surface Silver Conductors with DBS and AudioQuest's most successful Double Star-Quad Geometry. K2 will lift the sound of your system to near tropospheric heights.


    SOLID 100% PERFECT-SURFACE SILVER (PSS) CONDUCTORS: Solid conductors prevent strand interaction, a major source of cable distortion. Extremely high-purity Perfect-Surface Silver minimizes distortion caused by grain boundaries that exist within any metal conductor, eliminating harshness and greatly increasing clarity compared to all other conducting materials.


    CARBON-BASED NOISE-DISSIPATION (INSULATION): The negative conductors in K2 are insulated with partially conductive Carbon-Loaded Polyethylene. This remarkable material damps radio-frequency garbage from being fed back into the amplifier. The sonic benefit is exactly the same reduction in "hash" and better dimensionality that comes whenever RF garbage is reduced in an audio circuit. K2 uses Foamed-Polyethylene Insulation on its positive conductors because air absorbs next to no energy, and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.


    DIELECTRIC-BIAS SYSTEM (DBS, US Pat #s 7,126,055 & 7,872,195 B1): All insulation slows down the signal on the conductor inside. When insulation is unbiased, it slows down parts of the signal differently, a big problem for very time-sensitive multi-octave audio. AudioQuest's DBS creates a strong, stable electrostatic field which saturates and polarizes (organizes) the molecules of the insulation. This minimizes both energy storage in the insulation and the multiple nonlinear time-delays that occur. Sound appears from a surprisingly black background with unexpected detail and dynamic contrast. The DBS battery packs will last for years. A test button and LED allow for the occasional battery check.


    DOUBLE STAR-QUAD GEOMETRY: The relationship between conductors defines a cable's most basic electrical values (capacitance and inductance). However, even when those variables are kept in a reasonable balance, the relationship between conductors can be varied in ways that greatly affect the sound. The Double Star-Quad construction of K2 allows for significantly better dynamic contrast and information intelligibility than if the same conductors were run in parallel.


    SPREAD-SPECTRUM TECHNOLOGY (SST): Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid or tubular) have the fewest discontinuities, any conductor of a particular size does have a sonic signature. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different size conductors. The different SST-determined conductor sizes used in K2 allow an exceptionally clear, clean and dynamic sound.


    *Different Terminations & Multi-Spade Plug Option Available Upon Request


    AudioQuest
    $6,100.00
    Prepared Speaker Cable (Pair) - Multiple Lengths Available
    Buy Now
  • AudioQuest Redwood Speaker Cable MULTIPLE LENGTHS AVAILABLE AudioQuest Redwood Speaker Cable Quick View

    $3,800.00
    Buy Now
    x

    AudioQuest Redwood Speaker Cable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Full Range Termination with Banana (Silver) Plug*


    Custom Lengths Available Upon Request


    Redwood stands as a giant among its peers. The carefully finessed combination of Solid Perfect-Surface Copper+ and Perfect-Surface Silver conductors allow your music to present a sound field that is both large (as it was intended) and coherent. The addition of silver offers a significant improvement in ease and resolution.


    SOLID PERFECT-SURFACE COPPER+/PERFECT-SURFACE SILVER (PSC+/PSS) CONDUCTORS: Redwood uses a carefully finessed combination of Perfect-Surface Copper+ and extremely high-purity Perfect-Surface Silver conductors in a Self-Shielding Counter-Spiral HyperLitz. Solid conductors prevent strand interaction, which is the greatest single source of distortion in an audio cable or an AC power cable. Surface quality is critical because a conductor can be considered as a rail-guide for both the electric fields within a conductor, and for the magnetic fields outside the conductor. The astonishingly smooth and pure Perfect-Surface eliminates harshness and greatly increases clarity compared to OFHC, OCC, 8N and other coppers. Extremely high-purity PSS further minimizes distortion caused by grain boundaries, which exist within any metal conductor.


    CARBON-BASED MULTI-LAYER NOISE-DISSIPATION and CROSS-TALK-DISSIPATION SYSTEM (INSULATION): The negative conductors in Redwood are insulated with partially conductive Carbon-Loaded Polyethylene. This remarkable material damps radio-frequency garbage from being fed back into the amplifier. The sonic benefit is exactly the same reduction in "hash" and better dimensionality that comes whenever RF garbage is reduced in an audio circuit. Redwood uses Nitrogen-Injected Foamed-Polyethylene Insulation on its positive conductors because air absorbs next to no energy, and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.


    DIELECTRIC-BIAS SYSTEM (DBS, US Pat #s 7,126,055 & 7,872,195 B1): All insulation slows down the signal on the conductor inside. When insulation is unbiased, it slows down parts of the signal differently, a big problem for very time-sensitive multi-octave audio. AudioQuest's DBS creates a strong, stable electrostatic field which saturates and polarizes (organizes) the molecules of the insulation. This minimizes both energy storage in the insulation and the multiple nonlinear time-delays that occur. Sound appears from a surprisingly black background with unexpected detail and dynamic contrast. The DBS battery packs will last for years. A test button and LED allow for the occasional battery check.


    DOUBLE COUNTER-SPIRAL GEOMETRY: Redwood and the other AQ "Tree Feature" cables have an inner circular array of positive conductors spiraling in one direction. Around this inner group are the negative conductors, spiraling in the opposite direction. Even while the positive and negative conductors are crossing each other instead of being parallel, the relationship between the positive and negative groups is fixed and non-changing, adhering to one of AudioQuest's most basic design tenets: consistency. The result is an astonishing clarity, like focusing a camera lens you had no idea was so far out of focus.


    SPREAD-SPECTRUM TECHNOLOGY (SST): Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid round or tubular) have the fewest discontinuities, any conductor of a particular size does have a sonic signature. SST uses a precise combination of different size conductors in order to significantly reduce the audibility of these character flaws. The different SST-determined conductor sizes used in Redwood allow an exceptionally clear, clean and dynamic sound.


    *Different Terminations & Multi-Spade Plug Option Available Upon Request


    AudioQuest
    $3,800.00
    Prepared Speaker Cable (Pair) - Multiple Lengths Available
    Buy Now
  • AudioQuest Aspen Speaker Cable MULTIPLE LENGTHS AVAILABLE AudioQuest Aspen Speaker Cable Quick View

    $1,280.00
    Buy Now
    x

    AudioQuest Aspen Speaker Cable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Full Range Termination with Banana (Silver) Plug*


    Custom Lengths Available Upon Request


    SOLID PERFECT-SURFACE COPPER+/PERFECT-SURFACE COPPER (PSC+/PSC) CONDUCTORS: Aspen uses a carefully finessed combination of high-purity Perfect-Surface Copper (PSC), and extreme high-purity Perfect-Surface Copper+ (PSC+) conductors in a Self-Shielding Double Counter-Spiral HyperLitz design. Solid conductors prevent strand interaction, a major source of distortion. Surface quality is critical because a conductor can be considered as a rail-guide for both the electric fields within a conductor, and for the magnetic fields outside the conductor. The astonishingly smooth and pure Perfect-Surface nearly eliminates harshness and greatly increases clarity compared to OFHC, OCC, 8N and other coppers. The superior purity of PSC+ further minimizes distortion caused by grain boundaries, which exist within any metal conductor.


    DIELECTRIC-BIAS SYSTEM (DBS, US PAT #S 7,126,055 & 7,872,195 B1): Insulation is an electrical barrier, and also a "dielectric" because it is inside the conductor's magnetic field. All insulation slows down and smears the signal inside. When insulation is unbiased, it causes different amounts of delay for different frequencies and energy levels, a real problem for very time-sensitive multi-octave audio. AudioQuest's DBS creates a strong, stable electrostatic field which saturates and polarizes (organizes) the molecules of the insulation. Saturated (full) insulation absorbs less and therefore releases less out-of-phase energy. Minimizing nonlinear time delays results in clearer sound emerging from a "blacker" background. The DBS battery packs will last for years. A test button and LED allow for the occasional battery check.


    DOUBLE COUNTER-SPIRAL GEOMETRY: Aspen and the other AQ "Tree" Series cables have an inner circular array of positive conductors spiraling in one direction. Around this inner group, the negative conductors spiral in the opposite direction, which makes possible the significant performance advantage of the positive and negative conductors crossing each other instead of being parallel. However, the critical need for positive and negative to have a fixed non-changing relationship is ensured as the negative and positive groups are in fact two tubes with a perfectly consistent relationship. The result is an astonishing clarity, like focusing a camera lens you had no idea was so far out of focus.


    CARBON-BASED NOISE-DISSIPATION AND CROSSTALK-DISSIPATION SYSTEM (INSULATION): The negative conductors in Aspen are covered with partially conductive Carbon-Loaded Polyethylene. This remarkable material damps radio-frequency garbage from being fed back into the amplifier. The sonic benefit is exactly the same reduction in "hash" and improved dimensionality that comes whenever RF interference is reduced in an audio circuit. Another carbon layer also damps interaction between positive and negative conductors, and an external 3-layer carbon-based NDS System additionally absorbs external interference.


    SPREAD-SPECTRUM TECHNOLOGY (SST): Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid or tubular) have the fewest discontinuities, any particular size still has a sonic signature. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different size conductors. The different SST-determined conductor sizes used in Aspen allow an exceptionally clear, clean and dynamic sound.


    *Different Terminations & Multi-Spade Plug Option Available Upon Request


    AudioQuest
    $1,280.00
    Prepared Speaker Cable (Pair) - Multiple Lengths Available
    Buy Now
  • AudioQuest Meteor Speaker Cable MULTIPLE LENGTHS AVAILABLE AudioQuest Meteor Speaker Cable Quick View

    $2,500.00
    Buy Now
    x

    AudioQuest Meteor Speaker Cable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Full Range Termination with Banana (Silver) Plug*


    Custom Lengths Available Upon Request



    • Metal: Solid 4 x PSS / 4 x PSC+

    • Gauge: 12 AWG

    • Geometry: Double Star-Quad

    • Dielectric: Foamed-Polyethylene (For All Positive Conductors)

    • Noise-Dissipation System: Multi-Layer Carbon-Based Noise- and Crosstalk-Dissipation System

    • Jacket: Black/Dark Gray Braid

    • Terminations: Full-Range

    • Standard Plug: Banana (Silver)



    *Different Terminations & Multi-Spade Plug Option Available Upon Request


    AudioQuest
    $2,500.00
    Prepared Speaker Cable (Pair) - Multiple Lengths Available
    Buy Now
  • 8VS Speaker Cables MULTIPLE OPTIONS AVAILABLE 8VS Speaker Cables Quick View

    $138.00
    Buy Now
    x

    8VS Speaker Cables

    Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Consisting of eight gray and eight black conductors, arranged in a large format braid. The conductors feature VariStrand conductor geometry and are drawn from Ultra-pure copper. The aggregate wire size is two 9 awg conductors. The smooth power and authority of 8VS make it a great match for full range speakers, subwoofers and the low frequency section of the bi-wired loudspeakers.


    Kimber Kable
    $138.00
    8VS Speaker Cables - Multiple Options Available
    Buy Now
  • AudioQuest Star-Quad GO-4 Speaker Cable MULTIPLE LENGTHS AVAILABLE AudioQuest Star-Quad GO-4 Speaker Cable Quick View

    $439.00
    Buy Now
    x

    AudioQuest Star-Quad GO-4 Speaker Cable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Full Range Termination with Banana (Silver) Plug*


    Custom Lengths Available Upon Request


    GO-4 is a step up in the Star-Quad series by virtue of offering higher-quality metal and the addition of AudioQuest's patented Dielectric-Bias System. These two advancements significantly better the performance of Type 4, the most successful speaker cable in our 30+ year history.


    SOLID PERFECT-SURFACE COPPER+ (PSC+) CONDUCTORS: GO-4 uses extremely high-purity Perfect-Surface Copper+ conductors. All conductors are solid, which prevents strand interaction, a major source of distortion. Surface quality is critical because a conductor can be considered a rail-guide for both the electric fields within a conductor, and for the magnetic fields outside the conductor. The astonishingly smooth and pure PSC+ eliminates harshness and greatly increases clarity compared to OFHC, OCC, 8N and other coppers. The superior purity of PSC+ further minimizes distortion caused by grain boundaries, which exist within any metal conductor.


    CARBON-BASED NOISE-DISSIPATION and CROSS-TALK-DISSIPATION SYSTEMS (INSULATION): The two negative conductors in GO-4 are insulated with partially conductive Carbon-Loaded Polyethylene. This remarkable material damps radio-frequency garbage from being fed back into the amplifier. The sonic benefit is exactly the same reduction in "hash" and better dimensionality that comes whenever RF garbage is reduced in an audio circuit. GO-4 uses air-filled Nitrogen-Injected Foamed-Polyethylene Insulation on its positive conductors because air absorbs next to no energy, and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.


    STAR-QUAD GEOMETRY: The relationship between conductors defines a cable's most basic electrical values (capacitance and inductance). However, even when those variables are kept in a reasonable balance, the relationship between conductors can be varied in ways that greatly affect the sound. The Star-Quad construction of GO-4 allows for significantly better dynamic contrast and information intelligibility than if the same conductors were run in parallel.


    SPREAD-SPECTRUM TECHNOLOGY (SST): Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid or tubular) have the fewest discontinuities, any conductor of a particular size does have a sonic signature. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different size conductors. The different SST-determined conductor sizes used in GO-4 allow an exceptionally clear, clean and dynamic sound.


    DIELECTRIC-BIAS SYSTEM (DBS, US Pat #s 7,126,055 & 7,872,195 B1): All insulation slows down the signal on the conductor inside. When insulation is unbiased, it slows down parts of the signal differently, a big problem for very time-sensitive multi-octave audio. AudioQuest's DBS creates a strong, stable electrostatic field which saturates and polarizes (organizes) the molecules of the insulation. This minimizes both energy storage in the insulation and the multiple nonlinear time-delays that occur. Sound appears from a surprisingly black background with unexpected detail and dynamic contrast. The DBS battery packs will last for years. A test button and LED allow for the occasional battery check.


    *Different Terminations & Multi-Spade Plug Options Available Upon Request


    AudioQuest
    $439.00
    Prepared Speaker Cable (Pair) - Multiple Lengths Available
    Buy Now
  • AudioQuest WEL Signature Speaker Cable MULTIPLE LENGTHS AVAILABLE AudioQuest WEL Signature Speaker Cable Quick View

    $12,200.00
    Buy Now
    x

    AudioQuest WEL Signature Speaker Cable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Full Range Termination with Banana (Silver) Plug*


    Custom Lengths Available Upon Request


    It was never William E. Low's intention to create a "signature series" of cables, so it can be said that the WEL Signature series is something which evolved. As anyone who has ever birthed something from the ground up knows, things have the tendency to take on lives of their own. Inspiration becomes the compass that sets the direction we follow. WEL Signature speaker cable is a 30+ year culmination of AudioQuest's best materials and techniques, combined with the sensitivity and refinement that only comes when those who love music and appreciate the objectivity of uncolored, undistorted sound.


    SOLID 100% PERFECT-SURFACE SILVER (PSS) CONDUCTORS: WEL Signature uses extremely high-purity Perfect-Surface Silver conductors. All conductors are solid, which prevents strand interaction, a major source of distortion. Surface quality is critical because a conductor can be considered as a rail-guide for both the electric fields within a conductor, and for the magnetic fields outside the conductor. The astonishingly smooth and pure Perfect-Surface eliminates harshness and greatly increases clarity compared to OFHC, OCC, 8N and other coppers. The superior purity of PSS further minimizes distortion caused by grain boundaries, which exist within any metal conductor.


    CARBON-BASED MULTI-LAYER NOISE-DISSIPATION and CROSS-TALK-DISSIPATION SYSTEM (INSULATION): The negative conductors in WEL Signature are insulated with partially conductive Carbon-Loaded Polyethylene. This remarkable material damps radio-frequency garbage from being fed back into the amplifier. The sonic benefit is exactly the same reduction in "hash" and better dimensionality that comes whenever RF garbage is reduced in an audio circuit. WEL Signature uses Nitrogen-Injected Foamed-Polyethylene Insulation on its positive conductors because air absorbs next to no energy, and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.


    DIELECTRIC-BIAS SYSTEM (DBS, US Pat #s 7,126,055 & 7,872,195 B1): All insulation slows down the signal on the conductor inside. When insulation is unbiased, it slows down parts of the signal differently, a big problem for very time-sensitive multi-octave audio. AudioQuest's DBS creates a strong, stable electrostatic field which saturates and polarizes (organizes) the molecules of the insulation. This minimizes both energy storage in the insulation and the multiple nonlinear time-delays that occur. Sound appears from a surprisingly black background with unexpected detail and dynamic contrast. The DBS battery packs will last for years. A test button and LED allow for the occasional battery check.


    DOUBLE COUNTER-SPIRAL GEOMETRY: WEL Signature and the other AQ "Tree Feature" cables have an inner circular array of positive conductors spiraling in one direction. Around this inner group are the negative conductors spiraling in the opposite direction. Even while the positive and negative conductors are crossing each other instead of being parallel, the relationship between the positive and negative groups is fixed and non-changing, adhering to one of AudioQuest's most basic design tenets: consistency. The result is an astonishing clarity, like focusing a camera lens you had no idea was so far out of focus.


    SPREAD-SPECTRUM TECHNOLOGY (SST): Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid round or tubular) have the fewest discontinuities, any conductor of a particular size does have a sonic signature. SST uses a precise combination of different size conductors in order to significantly reduce the audibility of these character flaws. The different SST-determined conductor sizes used in WEL Signature allow an exceptionally clear, clean and dynamic sound.


    *Different Terminations & Multi-Spade Plug Option Available Upon Request


    AudioQuest
    $12,200.00
    Prepared Speaker Cable (Pair) - Multiple Lengths Available
    Buy Now
  • AudioQuest Star-Quad AG-4 Speaker Cable MULTIPLE LENGTHS AVAILABLE AudioQuest Star-Quad AG-4 Speaker Cable Quick View

    $3,000.00
    Buy Now
    x

    AudioQuest Star-Quad AG-4 Speaker Cable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Full Range Termination with Banana (Silver) Plug*


    Custom Lengths Available Upon Request


    AG-4 represents the ultimate refinement of AudioQuest's Star-Quad design. Solid Perfect-Surface Silver conductors offer unprecedented clarity and dynamics over all other conductors. AG-4 is invisible when you don't want to see it. Beautiful when you want to gaze upon it.


    SOLID 100% PERFECT-SURFACE SILVER (PSS) CONDUCTORS: AG-4's Perfect-Surface Silver has an astonishingly smooth and pure surface. Proprietary metal processing technology protects the wire's surface at every stage of drawing and fabrication. PSS's extreme transparency is made possible by applying Perfect-Surface Technology to ultra-pure solid silver. For fifteen years AudioQuest has pioneered the use of superior metals, but even we were surprised by the huge leap in performance made possible with Perfect-Surface Technology. PSS is the ultimate example of how far this remarkable technology can take us. All drawn metal exhibits directionality, whether in hardware store wire or in the best AQ cable. We wish we could design away this awkwardness. Since we can't, we pay close attention to optimizing performance by clearly marking the cables and our terminations. Please watch for these markings when installing any audio cables.


    CARBON-BASED NOISE-DISSIPATION and CROSS-TALK-DISSIPATION SYSTEMS (INSULATION):The two negative conductors in AG-4 are insulated with partially conductive Carbon-Loaded Polyethylene. This remarkable material damps radio-frequency garbage from being fed back into the amplifier. The sonic benefit is exactly the same reduction in "hash" and better dimensionality that comes whenever RF garbage is reduced in an audio circuit. AG-4 uses Nitrogen-Injected Foamed-Polyethylene Insulation on its positive conductors because air absorbs next to no energy, and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.


    STAR-QUAD GEOMETRY: The relationship between conductors defines a cable's most basic electrical values (capacitance and inductance). However, even when those variables are kept in a reasonable balance, the relationship between conductors can be varied in ways that greatly affect the sound. The Star-Quad construction of AG-4 allows for significantly better dynamic contrast and information intelligibility than if the same conductors were run in parallel.


    SPREAD-SPECTRUM TECHNOLOGY (SST): Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid or tubular) have the fewest discontinuities, any conductor of a particular size does have a sonic signature. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different size conductors. The different SST-determined conductor sizes used in AG-4 allow an exceptionally clear, clean and dynamic sound.


    DIELECTRIC-BIAS SYSTEM (DBS, US Pat #s 7,126,055 & 7,872,195 B1): All insulation slows down the signal on the conductor inside. When insulation is unbiased, it slows down parts of the signal differently, a big problem for very time-sensitive multi-octave audio. AudioQuest's DBS creates a strong, stable electrostatic field which saturates and polarizes (organizes) the molecules of the insulation. This minimizes both energy storage in the insulation and the multiple nonlinear time-delays that occur. Sound appears from a surprisingly black background with unexpected detail and dynamic contrast. The DBS battery packs will last for years. A test button and LED allow for the occasional battery check.


    *Different Terminations & Multi-Spade Plug Options Available Upon Request


    AudioQuest
    $3,000.00
    Prepared Speaker Cable (Pair) - Multiple Lengths Available
    Buy Now
  • AudioQuest Wild Wood Speaker Cable MULTIPLE LENGTHS AVAILABLE AudioQuest Wild Wood Speaker Cable Quick View

    $7,400.00
    Buy Now
    x

    AudioQuest Wild Wood Speaker Cable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Full Range Termination with Banana (Silver) Plug*


    Custom Lengths Available Upon Request


    Twice the silver conductor content is what separates Wild Wood from Redwood. The increase of silver opens Wild Wood widely, increasing resolution, while at the same time continuing to remain relaxed and natural. The sense of ease and extension allows you to forget about your tasks at hand and drift off into musically-induced bliss.


    SOLID PERFECT-SURFACE COPPER+/PERFECT-SURFACE SILVER (PSC+/PSS) CONDUCTORS: Wild Wood uses a carefully finessed combination of Perfect-Surface Copper+ and extremely high-purity Perfect-Surface Silver conductors in a Self-Shielding Counter-Spiral HyperLitz. Solid conductors prevent strand interaction, which is the greatest single source of distortion in an audio cable or an AC power cable. Surface quality is critical because a conductor can be considered as a rail-guide for both the electric fields within a conductor, and for the magnetic fields outside the conductor. The astonishingly smooth and pure Perfect-Surface eliminates harshness and greatly increases clarity compared to OFHC, OCC, 8N and other coppers. Extremely high-purity PSS further minimizes distortion caused by grain boundaries, which exist within any metal conductor.


    CARBON-BASED MULTI-LAYER NOISE-DISSIPATION and CROSS-TALK-DISSIPATION SYSTEM (INSULATION): The negative conductors in Wild Wood are insulated with partially conductive Carbon-Loaded Polyethylene. This remarkable material damps radio-frequency garbage from being fed back into the amplifier. The sonic benefit is exactly the same reduction in "hash" and better dimensionality that comes whenever RF garbage is reduced in an audio circuit. Wild Wood uses Nitrogen-Injected Foamed-Polyethylene Insulation on its positive conductors because air absorbs next to no energy, and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.


    DIELECTRIC-BIAS SYSTEM (DBS, US Pat #s 7,126,055 & 7,872,195 B1): All insulation slows down the signal on the conductor inside. When insulation is unbiased, it slows down parts of the signal differently, a big problem for very time-sensitive multi-octave audio. AudioQuest's DBS creates a strong, stable electrostatic field which saturates and polarizes (organizes) the molecules of the insulation. This minimizes both energy storage in the insulation and the multiple nonlinear time-delays that occur. Sound appears from a surprisingly black background with unexpected detail and dynamic contrast. The DBS battery packs will last for years. A test button and LED allow for the occasional battery check.


    DOUBLE COUNTER-SPIRAL GEOMETRY: Wild Wood and the other AQ "Tree Feature" cables have an inner circular array of positive conductors spiraling in one direction. Around this inner group are the negative conductors spiraling in the opposite direction. Even while the positive and negative conductors are crossing each other instead of being parallel, the relationship between the positive and negative groups is fixed and non-changing, adhering to one of AudioQuest's most basic design tenets: consistency. The result is an astonishing clarity, like focusing a camera lens you had no idea was so far out of focus.


    SPREAD-SPECTRUM TECHNOLOGY (SST): Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid round or tubular) have the fewest discontinuities, any conductor of a particular size does have a sonic signature. SST uses a precise combination of different size conductors in order to significantly reduce the audibility of these character flaws. The different SST-determined conductor sizes used in Wild Wood allow an exceptionally clear, clean and dynamic sound.


    *Different Terminations & Multi-Spade Plug Option Available Upon Request


    AudioQuest
    $7,400.00
    Prepared Speaker Cable (Pair) - Multiple Lengths Available
    Buy Now
  • AudioQuest Rocket 44 Speaker Cable MULTIPLE LENGTHS AVAILABLE AudioQuest Rocket 44 Speaker Cable Quick View

    $289.00
    Buy Now
    x

    AudioQuest Rocket 44 Speaker Cable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Full Range Termination with Banana (Silver) Plug*


    Custom Lengths Available Upon Request


    Rocket 44 incorporates Perfect-Surface Copper+ into its blend of conductors. PSC+ has fewer grain boundaries, which reduces harshness in the sound. This carefully finessed combination of PSC and PSC+ enables Rocket 44 to deliver a clear and faithful presentation.


    SOLID PERFECT-SURFACE COPPER+/PERFECT-SURFACE COPPER (PSC+/PSC) CONDUCTORS: Rocket 44 uses a carefully finessed combination of extremely high-purity Perfect-Surface Copper+ and Perfect-Surface Copper. The astonishingly smooth and pure PSC further eliminates harshness and greatly increases clarity. Rocket 44's conductor mix is dominated by PSC+.


    CARBON-BASED NOISE-DISSIPATION and CROSS-TALK-DISSIPATION SYSTEMS (INSULATION): The four negative conductors in Rocket 44 are insulated with partially conductive Carbon-Loaded Polyethylene. This remarkable material damps radio-frequency garbage from being fed back into the amplifier. The sonic benefit is exactly the same reduction in "hash" and better dimensionality that comes whenever RF garbage is reduced in an audio circuit. Rocket 44 uses Nitrogen-Injected Foamed-Polyethylene Insulation on its positive conductors because air absorbs next to no energy, and Polyethylene is low-loss with a benign distortion profile. Thanks to all the air in Foamed-Polyethylene Insulation, it causes much less of the "out-of-focus" effect common to other materials.


    DOUBLE STAR-QUAD GEOMETRY: The relationship between conductors defines a cable's most basic electrical values (capacitance and inductance). However, even when those variables are kept in a reasonable balance, the relationship between conductors can be varied in ways that greatly affect the sound. The Double Star-Quad construction of Rocket 44 allows for significantly better dynamic contrast and information intelligibility than if the same conductors were run in parallel.


    SPREAD-SPECTRUM TECHNOLOGY (SST): Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid or tubular) have the fewest discontinuities, any conductor of a particular size does have a sonic signature. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different sized conductors. The different SST-determined conductor sizes used in Rocket 44 allow an exceptionally clear, clean and dynamic sound.


    *Different Terminations & Multi-Spade Plug Options Available Upon Request


    AudioQuest
    $289.00
    Prepared Speaker Cable (Pair) - Multiple Lengths Available
    Buy Now
Go to top