Vinyl. Our way of life since 2004 (877) 929-8729

VPI Dealer Authorized & Certified
Site Search
Menu Free shipping on domestic orders over $49.99! - We ship worldwide!
LP20 - 20% Off Vinyl
Home > Products for: '

Rp10

'
  • 1
Results per page:
  • Rega RP10 Turntable (No Cartridge) Rega RP10 Turntable (No Cartridge) Quick View

    $5,495.00
    Buy Now
    x

    Rega RP10 Turntable (No Cartridge)

    40th



    Rega Made


    Need help choosing or installing your phono cartridge? Please contact our audio advisor at 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The Rega RP10 skeletal turntable.


    Rega is extremely pleased to announce the launch of the much awaited RP10.


    Rega's design philosophy extends further than ever before with advanced components built around our radical new plinth design. Featuring the brand new RB2000 tonearm, a ceramic flywheel effect platter and the custom RP10 power supply (allowing total control and accuracy over both motor vibration and speed performance) guarantee the highest level of performance from a Rega turntable to date.


    The RP10 will also be available with its perfect partner, the Apheta moving coil cartridge, factory fitted as a package option.


    The Evolution of Revolution


    Evolution is a well proven and documented process in many areas of our lives. This applies in particular to design engineers and machines. Over the past forty years our cars have become more reliable and economical whilst we take for granted the reliability and speed of modern aircraft. Rega is no exception to evolution. Rega's experience and previous achievements allow us to continually develop and produce better products.


    The RP10 represents probably the biggest step forward in the evolution of Roy Gandy's turntable design philosophies. Low mass, high rigidity plinths combined with electronically controlled low vibration motors, high flywheel effect platters and lower mass higher stability tonearms.


    RP10 Custom power supply


    Housed in Rega's custom design case is a brand new advanced anti vibration and speed control circuit dedicated to running the 24v low noise motor. The speed and control of the motor is achieved by using a new DSP (digital signal processing) generator built upon a high stability crystal. The device will divide the accurate square wave from the crystal to the exact frequency required to turn the platter at the selected speed. The DSP core will also generate a near perfect sinusoidal waveform to power the motor. Factory set vibration and speed adjustments are then made to the power supply to tune the motor for optimal performance.


    The entire tonearm structure is designed to have the minimum of mechanical joints whilst using the stiffest materials in all critical areas. The tolerance of the RB2000 tonearm is so tight that no adhesive is used at any point throughout the construction. A brand new low mass, precision engineered, vertical bearing assembly has been manufactured to further compliment the inherent design philosophy of the RP10 turntable.


    The RB2000 uses the latest award winning Rega arm tube. Each one which is meticulously hand polished (keeping mass to an absolute minimum) and has been completely redesigned to redistribute mass and further reduce stresses and resonances. This advanced design tube increases the stiffness and rigidity of the overall assembly whilst reducing stress on the bearings even further.


    Magnesium and Phenolic - Dual bracing


    A super lightweight plinth combined with a double brace mounted specifically where the increased rigidity is required (between the tonearm mounting and the main hub bearing) forms a structurally sound "stressed beam" assembly. This design prevents energy absorption and unwanted resonances which will add un-natural distortions to the music. The RP10 takes our double brace technology to the next level. Not content with an unprecedented stiffness to mass ratio, Rega have obsessively reduced any resonant properties by using two different materials for the new stressed beam. The top layer is magnesium and the bottom layer is pheno-lic (two of the lightest and stiffest materials available). Incorporating two different materials into the brace structure lowers their ability to pick up unwanted airborne vibrations. Simply put, different materials have different natural resonances. By using two different materials together they decrease the natural frequency of each other by self damping.


    Super flywheel effect ceramic platter


    The RP10 uses a custom ceramic flywheel effect platter. The platter is produced from ceramic oxide powder which is compressed, fired and diamond cut to ensure perfect accuracy and flatness across the surface. The new platter features a modified construction over the previous P9 version with improved coupling to the sub platter.


    24V Low noise motor


    The motor is a high specification, 24V twin phase synchronous unit. It is controlled by Rega's unique and innovative RP10-PSU power supply. The motor drives the CNC machined pulley, sub platter and hub-bearing assembly via the twin belt drive. Each motor is individually hand tuned to its own custom power supply in the factory to minimise vibration, motor noise and ensure optimum performance.


    Skeletal plinth design with polyolefin foam core


    Controversially Rega has always researched methods of producing light but stiff and rigid plinths. The technology is simple: unwanted noise at microscopic levels is developed by the turntable motor and main bearing. The plinth can also pick up airborne vibration from the music. From the beginning in the 1970's Rega pioneered the use of a stressed skin structure for the plinth. This uses two layers of phenolic resin with a lightweight particle or fibre board sandwiched between the skins. This technique has been used in many applications where stiff, light structures are needed such as an aircraft wing or a Formula 1 chassis.


    The current increase in interest in turntables has allowed Rega to research and develop higher technology structures for the customer who is happy pay a little more for higher sound quality. The all new RP10 turntable utilises a unique new stressed skin structure produced from thin phenolic skins sandwiching a featherweight nitrogen expanded, closed cell, polyolefin foam core. This material has been developed exclusively for Rega over a three year period. The RP10 plinth is 7 times lighter than the weight of the original Planar 3 plinth. Rega has added even more stiffness in the crucial area between the arm and the main bearing.


    De-coupled outer frame and dust cover


    A common problem for many skeletal design turntables is the inability to incorporate an effective dust cover into the design. We have constructed an outer frame that minimises contact between the inner and outer plinth. The only points of contact are three location devices on the feet which centralises the inner and outer plinths perfectly. This makes set-up extremely easy and allows the use of a dust cover. The RP10 can be used without the outer frame if so desired.


    Turntable design & mythology


    Today there are many approaches to Hi-Fi design which follow established and informed engineering or electronic principles. Amplifier and loudspeaker design has been well documented over the years with excellent technical publications. These subjects have been based on tried and tested acoustic criteria and many computer software programs now exist that enable a near amateur to design a passable working loudspeaker based on known acoustic and mathematical parameters.


    Enter turntable design: When it comes to turntable design we are limited to a few poorly informed articles describing only very limited aspects of design. This is a subject full of mythology. Designers propose theories that counter the basic laws of physics, use terminology that doesn't actually exist in the engineering world, build products that are more like beautiful sculptures than acoustic reproduction machines and sell items costing tens of thousands of pounds that hardly function as intended and often fail to work at all.


    For instance a very common myth is "the heavier the better" concept. Turntable bases weighing tens of kilograms are not uncommon. The reality is that the base actually needs to be as light as possible to prevent unwanted bearing and motor noise being transferred to the turntable or record. Platters also fall under a similar myth with many platter designs becoming so heavy that it is impossible to design a correctly functioning bearing (and some so light that anyone can hear the speed inconsistency). The turntable platter itself needs to be of enough weight to spin at a constant speed within the confines of the chosen bearing and motor drive system.


    Many amateur designers in any field choose one component in a design and try to achieve an extreme in size, weight and quality. They believe that by taking one theory to its extreme the design will become "perfect". The reality of all engineering, design (and life) is that perfection is not possible. Based on this reality, Rega's goal has always been to optimise a mixture of numerous "correct compromises" thus bringing the designer nearer to the unachievable goal of perfection.


    Rega Turntables
    $5,495.00
    Rega RP10 - No Cartridge Buy Now
  • Rega RP10 Turntable (With Cartridge) Rega RP10 Turntable (With Cartridge) Quick View

    $6,695.00
    Buy Now
    x

    Rega RP10 Turntable (With Cartridge)

    40th



    Rega Made


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    Factory Fitted With Apheta 2 Moving Coil Cartridge


    The Rega RP10 skeletal turntable.


    Rega is extremely pleased to announce the launch of the much awaited RP10.


    Rega's design philosophy extends further than ever before with advanced components built around our radical new plinth design. Featuring the brand new RB2000 tonearm, a ceramic flywheel effect platter and the custom RP10 power supply (allowing total control and accuracy over both motor vibration and speed performance) guarantee the highest level of performance from a Rega turntable to date.


    The Evolution of Revolution


    Evolution is a well proven and documented process in many areas of our lives. This applies in particular to design engineers and machines. Over the past forty years our cars have become more reliable and economical whilst we take for granted the reliability and speed of modern aircraft. Rega is no exception to evolution. Rega's experience and previous achievements allow us to continually develop and produce better products.


    The RP10 represents probably the biggest step forward in the evolution of Roy Gandy's turntable design philosophies. Low mass, high rigidity plinths combined with electronically controlled low vibration motors, high flywheel effect platters and lower mass higher stability tonearms.


    RP10 Custom power supply


    Housed in Rega's custom design case is a brand new advanced anti vibration and speed control circuit dedicated to running the 24v low noise motor. The speed and control of the motor is achieved by using a new DSP (digital signal processing) generator built upon a high stability crystal. The device will divide the accurate square wave from the crystal to the exact frequency required to turn the platter at the selected speed. The DSP core will also generate a near perfect sinusoidal waveform to power the motor. Factory set vibration and speed adjustments are then made to the power supply to tune the motor for optimal performance.


    The entire tonearm structure is designed to have the minimum of mechanical joints whilst using the stiffest materials in all critical areas. The tolerance of the RB2000 tonearm is so tight that no adhesive is used at any point throughout the construction. A brand new low mass, precision engineered, vertical bearing assembly has been manufactured to further compliment the inherent design philosophy of the RP10 turntable.


    The RB2000 uses the latest award winning Rega arm tube. Each one which is meticulously hand polished (keeping mass to an absolute minimum) and has been completely redesigned to redistribute mass and further reduce stresses and resonances. This advanced design tube increases the stiffness and rigidity of the overall assembly whilst reducing stress on the bearings even further.


    Magnesium and Phenolic - Dual bracing


    A super lightweight plinth combined with a double brace mounted specifically where the increased rigidity is required (between the tonearm mounting and the main hub bearing) forms a structurally sound "stressed beam" assembly. This design prevents energy absorption and unwanted resonances which will add un-natural distortions to the music. The RP10 takes our double brace technology to the next level. Not content with an unprecedented stiffness to mass ratio, Rega have obsessively reduced any resonant properties by using two different materials for the new stressed beam. The top layer is magnesium and the bottom layer is pheno-lic (two of the lightest and stiffest materials available). Incorporating two different materials into the brace structure lowers their ability to pick up unwanted airborne vibrations. Simply put, different materials have different natural resonances. By using two different materials together they decrease the natural frequency of each other by self damping.


    Super flywheel effect ceramic platter


    The RP10 uses a custom ceramic flywheel effect platter. The platter is produced from ceramic oxide powder which is compressed, fired and diamond cut to ensure perfect accuracy and flatness across the surface. The new platter features a modified construction over the previous P9 version with improved coupling to the sub platter.


    24V Low noise motor


    The motor is a high specification, 24V twin phase synchronous unit. It is controlled by Rega's unique and innovative RP10-PSU power supply. The motor drives the CNC machined pulley, sub platter and hub-bearing assembly via the twin belt drive. Each motor is individually hand tuned to its own custom power supply in the factory to minimise vibration, motor noise and ensure optimum performance.


    Skeletal plinth design with polyolefin foam core


    Controversially Rega has always researched methods of producing light but stiff and rigid plinths. The technology is simple: unwanted noise at microscopic levels is developed by the turntable motor and main bearing. The plinth can also pick up airborne vibration from the music. From the beginning in the 1970's Rega pioneered the use of a stressed skin structure for the plinth. This uses two layers of phenolic resin with a lightweight particle or fibre board sandwiched between the skins. This technique has been used in many applications where stiff, light structures are needed such as an aircraft wing or a Formula 1 chassis.


    The current increase in interest in turntables has allowed Rega to research and develop higher technology structures for the customer who is happy pay a little more for higher sound quality. The all new RP10 turntable utilises a unique new stressed skin structure produced from thin phenolic skins sandwiching a featherweight nitrogen expanded, closed cell, polyolefin foam core. This material has been developed exclusively for Rega over a three year period. The RP10 plinth is 7 times lighter than the weight of the original Planar 3 plinth. Rega has added even more stiffness in the crucial area between the arm and the main bearing.


    De-coupled outer frame and dust cover


    A common problem for many skeletal design turntables is the inability to incorporate an effective dust cover into the design. We have constructed an outer frame that minimises contact between the inner and outer plinth. The only points of contact are three location devices on the feet which centralises the inner and outer plinths perfectly. This makes set-up extremely easy and allows the use of a dust cover. The RP10 can be used without the outer frame if so desired.


    Turntable design & mythology


    Today there are many approaches to Hi-Fi design which follow established and informed engineering or electronic principles. Amplifier and loudspeaker design has been well documented over the years with excellent technical publications. These subjects have been based on tried and tested acoustic criteria and many computer software programs now exist that enable a near amateur to design a passable working loudspeaker based on known acoustic and mathematical parameters.


    Enter turntable design: When it comes to turntable design we are limited to a few poorly informed articles describing only very limited aspects of design. This is a subject full of mythology. Designers propose theories that counter the basic laws of physics, use terminology that doesn't actually exist in the engineering world, build products that are more like beautiful sculptures than acoustic reproduction machines and sell items costing tens of thousands of pounds that hardly function as intended and often fail to work at all.


    For instance a very common myth is "the heavier the better" concept. Turntable bases weighing tens of kilograms are not uncommon. The reality is that the base actually needs to be as light as possible to prevent unwanted bearing and motor noise being transferred to the turntable or record. Platters also fall under a similar myth with many platter designs becoming so heavy that it is impossible to design a correctly functioning bearing (and some so light that anyone can hear the speed inconsistency). The turntable platter itself needs to be of enough weight to spin at a constant speed within the confines of the chosen bearing and motor drive system.


    Many amateur designers in any field choose one component in a design and try to achieve an extreme in size, weight and quality. They believe that by taking one theory to its extreme the design will become "perfect". The reality of all engineering, design (and life) is that perfection is not possible. Based on this reality, Rega's goal has always been to optimise a mixture of numerous "correct compromises" thus bringing the designer nearer to the unachievable goal of perfection.


    >

    Rega Turntables
    $6,695.00
    Rega RP10 - Apheta 2 Cartridge Buy Now
  • Timeless Timeless Quick View

    $6.99
    Buy Now
    x

    Timeless

    How Long Has This Been Going On
    Easy To Love
    Come Rain Or Come Shine
    How About Me
    Do Nothin' Till You Hear From Me
    A Time For Love
    I Can't Believe That You're In Love With Me
    Please Send Me Someone To Love
    Impossible
    Don't Like Goodbyes
    Diane Schuur
    $6.99
    Vinyl LP - Sealed Small cutout slit on cover Buy Now
  • Streamlines Streamlines Quick View

    $4.99
    Buy Now
    x

    Streamlines

    Feet First
    Jungle Funk
    Morning Rays
    Say You Love Me
    Outzone
    A Short Visit
    Amaretto
    Pipes of Pandora
    Tom Scott
    $4.99
    Vinyl LP - Sealed Small cutout slit on cover Buy Now
  • Every Step of the Way Every Step of the Way Quick View

    $13.99
    Buy Now
    x

    Every Step of the Way

    1. Every Step Of The Way

    2. Shibuya Station

    3. The Key To You

    4. Remebering What You Said

    5. Painted Desert

    6. Rebach

    7. Sao Paulo

    8. No Worries

    9. I Just Can't Stop Loving You

    10. Once Running Free
    David Benoit
    $13.99
    Vinyl LP - Sealed Small cutout slit on cover Buy Now
  • Rega Planar 6 Turntable (Pre-Order) 3 OPTIONS AVAILABLE Rega Planar 6 Turntable (Pre-Order) Quick View

    $1,595.00
    Buy Now
    x

    Rega Planar 6 Turntable (Pre-Order)



    Need help choosing the right turntable for you? Please contact our audio advisor at 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    Pre-Orders Recommended - Shipping Mid-August 2017


    The Planar 6 is built around the huge success of the RP8 and RP10 turntables. It is the first new Rega turntable to be constructed with an ultra lightweight Tan-Cast 8 polyurethane foam core plinth (a material developed for the aerospace industry) . This material is sandwiched between a new HPL (high pressure laminate). HPL is exceptionally thin whilst extremely rigid and is presented in a stunning Polaris matt grey finished with high gloss polymer black edge trim.


    The Planar 6 now benefits from a single piece, machined aluminum sub-platter, a new 24v motor hand tuned and matched to its own NEO power supply and custom drive pulley fitted with our upgrade drive belt as standard.


    The Neo PSU uses the RP10 DSP (digital signal processing) generator built upon a high stability crystal. The DSP generator will divide the accurate signal from the crystal to the exact frequency required to turn the platter at the selected speed. The DSP generator will also produce a near perfect sinusoidal waveform to drive the motor. This, along with an efficient drive amplifier, generates a 24V AC balanced signal of less than 0.15% distortion, which is completely un-affected by any changes in the mains/line voltage and conditions. This then drives the turntables anti-vibration circuit, which is situated beneath the turntable.


    Key Features:


    • NEO power supply.
    • Super lightweight foam core plinth.
    • Plinth laminate: New Polaris HPL (high pressure laminate). Non-marking matt finish scratch resistant high rigidity skin.
    • Available in one finish 'Polaris Grey' matt finish with high gloss black polymer edge trim.
    • Upgrade white drive belt fitted as standard.
    • Custom dual layer smoked / clear float glass platter.
    • Single piece aluminium sub platter.
    • Custom machined high precision drive pulley.
    • Patent pending, ultra-low friction central brass hub.
    • Rega's double brace technology, with integral custom matched aluminium tonearm and hub pillars to ensure maximum rigidity and accuracy.
    • RB330 handmade precision tonearm with custom stainless weight.
    • New high spec Rega 24v low noise synchronous motor - each motor matched by hand to its own NEO PSU ensuring optimum anti-vibration control.
    • New smoked dust cover.
    • New aluminium foot trims and Planar style feet.
    • Available with Ania MC cartridge factory fitted.


    Rega Turntables
    $1,595.00
    Planar 6 Turntable - Cartridge Options PRE-ORDER
    Buy Now
  • 1
Go to top