Vinyl. Our way of life since 2004 (877) 929-8729

VPI Dealer Authorized & Certified
Site Search
Menu Free shipping on domestic orders over $49.99! - We ship worldwide!
LP20 - 20% Off Vinyl
Home > Products for: '

Integrated Amplifier

'
Results per page:
  • Cayin A-50T Tube Integrated Amplifier Cayin A-50T Tube Integrated Amplifier Quick View

    $1,600.00
    Buy Now
    x

    Cayin A-50T Tube Integrated Amplifier

    Stereophile Stereophile



    The Cayin A-50T is the best low-price amp I have ever heard, and it rivals some of the best amps in any price range.

    - Harry Weisfeld, owner of VPI Industries


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    A beautifully-crafted, hand-made tube piece manufactured to deliver the sound of the classic Marantz 8B


    The Cayin Audio A-50T uses four EL34s for Class A/B1 P.P amplification. The craftsmanship is absolutely first-rate, featuring point-to-point wiring, and each unit is hand-initialed by a quality-control inspector. The toroid power transformer and EI audio transformer are specially manufactured for the A-50T with low magnetic leakage, wide frequency response and low impedance. Two 12AX7EHs and two 12AU7s are used in the preamplifier. One very cool feature is the ability to switch between ultralinear and triode by remote control.


    This piece was hand-built with extreme attention to detail, including point-to-point wiring. Point-to-point was the way that amps used to be wired back in the 1950s and '60s when cost was not the primary objective. Nowadays, most everything contains circuit boards instead of this point-to-point wiring, which is much more dependable and better performing. The bottom line is that point-to-point wiring sounds better. It's one of the main reasons why these Cayin pieces sound like the classic tube gear from Marantz and McIntosh. Anymore, products that feature point-to-point wiring cost a fortune, or they feature sub-par workmanship. You simply are not going to find craftsmanship like with this Cayin gear for anywhere close to this price.


    There are output taps for 4 or 8 ohms. This allows you to fine-tune the sound that you desire. Switching is simple, and listening to the differences is a lot of fun. There is a removable cage, included at no extra charge. The cage snaps into place simply, so that you can take it on and off with no problem. Keep it on if you're worried about protecting your tubes, or take it off to show what real, heavy-duty, classic tube gear looks like. Turn off the lights and watch 'em glow.


    Cayin
    $1,600.00
    Cayin A-50T Tube Integrated Amp Buy Now
  • Marantz PM6006 Integrated Amplifier Marantz PM6006 Integrated Amplifier Quick View

    $699.00
    Buy Now
    x

    Marantz PM6006 Integrated Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The PM6006 is an upgraded successor of the multi-award-winning PM6005. We've retained the pre-amp and power-amp sections that exclusively feature discrete components - not a single IC in sight of the signal path. The PM6006 is upgraded for peak current at the amplifier stage, which makes it possible to refine the sound for you in much more detail.


    You can connect this superb integrated amplifier directly to a vast range of digital sources and use its superior 24bit/192kHz high current CS4398 DAC to create an unbelievably high level of audio enjoyment with new media. The unit now includes 2 optical and 1 coaxial digital inputs (an additional optical input from the predecessor, PM6005), and the complete digital section is fully shielded by an extra metal housing to ensure that the digital stage has no effect on the analog signal.


    All of the original features-such as five-line audio input including phono, two-pairs of gold-plated speaker connections with the convenience of bi-wiring, and a remote handset-are all still there. The lower impedance shielded Toroidal transformer, as well as customized components and unique Marantz HDAM modules care for powerful, dynamic and detailed original Marantz sound. In short, the new PM6006 is a new star with excellent genes.


    Marantz
    $699.00
    Integrated Amplifier Buy Now
  • Marantz HD-AMP1 Digital Integrated Amplifier Marantz HD-AMP1 Digital Integrated Amplifier Quick View

    $1,099.00
    Buy Now
    x

    Marantz HD-AMP1 Digital Integrated Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    HD-AMP1 Digital Integrated Amplifier with USB-DAC


    Housed in an elegant compact chassis that occupies just over 1 square foot of desktop or shelf space, the HD-AMP1 digital integrated amplifier features high resolution D/A conversion and compatibility with a wide range of uncompressed high resolution audio formats, including WAV, ALAC, FLAC and AIFF, and is also capable of decoding DSD tracks with compatibility of all 3 DSD sampling frequencies - 2.6/5.2/11.2-MHz (DSD is the audio format of SACD).


    The powerful digital amplifier section features cool-running wide bandwidth and wide dynamic range Class D audiophile amplifier technology, delivering 35 watts per channel into 8 ohms and 70 watts per channel into 4 ohms, providing compatibility with the widest range of speaker types and impedances.


    Featuring 2 USB ports, 1 on the front and 1 on the back, the HD-AMP1 lets you connect your favorite iDevice or USB drive to the front panel USB port, and your PC or Mac to the rear panel USB-B port to stream your high resolution audio tracks, and it features advanced noise isolation to guard against digital noise from degrading the high resolution sound.


    Equipped with Marantz Musical Digital Filtering, our proprietary DSP filter technology, the HD-AMP1 lets you choose from 2 digital filter algorithms so you can precisely tailor the sound to your liking. The reference-class ESS SABRE DAC features 32-bit/384-kHz decoding for the highest resolution and widest dynamic range with today's advanced audiophile hi-res tracks.


    The analog sections feature our exclusive HDAM-SA2 modules, including the analog front end block, the D/A converter block and in the dedicated headphone amplifier block.


    There are 2 optical and 1 coaxial digital inputs, along with 2 analog inputs, so you can connect the widest range of source components.


    The elegant chassis features a solid brushed aluminum front panel along with luxurious woodtone side panels.


    Marantz
    $1,099.00
    Digital Integrated Amplifier Buy Now
  • Integrated Amplifier A15.3 Integrated Amplifier A15.3 Quick View

    $549.99
    Buy Now
    x

    Integrated Amplifier A15.3


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The a15.3 presents a smart alternative to surround sound receivers and all in one systems. It's the perfect choice for someone looking to assemble their first hi end audio system. Partner it with the matching c-dac15.3 dac cd player and one of our turntables for a great sounding system. Connecting a turntable couldn't be easier with the built-in moving magnet phono preamp. The amp delivers an impressive 50 watts/channel, which is plenty of power to drive the majority of loudspeakers on the market.


    Music Hall
    $549.99
    Music Hall A15.3 Integrated Amp Buy Now
  • Manley Mahi Amplifier Manley Mahi Amplifier Quick View

    $4,900.00
    Buy Now
    x

    Manley Mahi Amplifier

    6moons


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Handcrafted in the USA


    These cute little guys produce around 40 watts RMS in Ultra-Linear mode or around 20 watts in TRIODE from a quartet of EL84 / 6BQ5 tubes driven by a 6414 dual triode driver and a 12AT7EH input dual triode. The EL84 has been one of our very favorite tubes for many years, extremely long lasting and reliable, and can be considered the smaller brother of the much beloved EL34: really quick-sounding both in the bass and especially in the top end. And of course this has a lot to do with our Manley Output transformer, the same one we build for the Manley Stingrays.


    We have been building EL84 amplifiers for well over a decade. The Manley-branded Tiny Triodes were much acclaimed in the early 1990's. In 1993 after the Manley company split off from VTL, the Manley Tiny Triodes underwent a chassis rework to become the Manley 35 watt Monoblocks soon followed by the 50 Watt Monoblocks. The more powerful Ultra-Linear mode operation became the standard with hard-wired Triode operation or Triode/UL switching available upon special request.


    After the introduction of the Stingray Integrated amplifier in 1998, we then went back and incorporated the Stingray's new circuitry design refinements into the 50 Watt Monoblocks. Finally, big bass out of a small amplifier! So, topology-wise, the post-1998 50 watters were the monoblock version of the stereo Stingray, with the additional variable feedback feature. After the introduction of the fabulous Manley Snappers in 2002, it was obvious that we had to update our classic EL84 50 watt monoblocks both cosmetically and feature-wise. Make-over time!


    Everyone was always asking us for Triode/Ultra-Linear switching. We listened to your requests and feature the Triode-UL switch as standardequipment on the MAHI's. As are the beautiful german WBT binding posts. Also we increased the B+ rail capacity in a major way. The 50 Watt monos only had around 45 Joules or energy storage in the B+ rail. Now the MAHI's have nearly 115 Joules of energy storage for the B+ rail. You can hear this improvement in the especially in the bass region: tighter, faster, deeper. More is more in this case.


    The chassis design is like a mini-Snapper. They are so cute! And of course they come standard as a pair so you get.... Mahi-Mahi.


    We believe the MANLEY MAHI's give a lot of value for an affordable price and we think you will be surprised at just how big these little guys sound. You have no idea how fabulous these amplifiers are.


    Manley Labs
    $4,900.00
    Manley Mahi Amplifier Buy Now
  • Manley Stingray iTube Stereo Integrated Amplifier Manley Stingray iTube Stereo Integrated Amplifier Quick View

    $6,300.00
    Buy Now
    x

    Manley Stingray iTube Stereo Integrated Amplifier

    Stereophile



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Handcrafted in the USA


    The famous Manley Stingray stereo integrated amplifier has been renewed and refreshed. New for 2009 we present to you the Stingray iTube integrated tube amplifier with iPod dock and full featured RF and IR remote control.


    The STINGRAY iTube is the next evolution from our acclaimed Stingray Integrated Amplifier, legendary in the hifi world since it swam from our labs in 1997. Originally conceived with particular attention paid to optimal component placement for the purity and symmetry of the signal path layout, the Stingray quickly became one of our best-selling products. The Stingray iTube retains the same basic tube circuitry and marvelous output transformers as the original with some important improvements:


    An iPod dock has been integrated into the Stingray iTube as the 4th input source. The Manley iTube has been certified by Apple and officially sanctioned as a Made for iPod product. The Stingray's Remote Control commands the iPod PLAY/PAUSE and TRACK FORWARD/BACK controls.


    The iPod's video output is available at the S-Video output jack located on the left side facia.


    The high voltage tube energy storage has been increased vastly resulting in even more solid and coherent bass control and impact.


    A headphone jack has been added to the right side facia. This jack re-routes the output from the speaker binding posts and mutes the Subwoofer output feed.


    The Remote Control works with both Radio Frequency and InfraRed technologies. Using the remote in RF mode gives freedom from having to point and shoot. The RF remote is omnidirectional and works through walls and cabinets. IR capability is included for those with Universal Learning Remote Controls for consolidated integration into existing systems. The volume control, balance adjust, input switching, and iPod interface commands are all on the RF/IR Remote Control. Additionally user can perform the MUTE, DIM, INSERT and STANDBY commands with the Remote Control.


    Each INPUT can be individually level trimmed to match and to optimize system gain staging of various input devices.


    The fancy blue LED displays surrounding the INPUT and VOLUME encoder knobs can be dimmed down or turned off entirely, after a user-settable time period, or a screen-saver random light sequence can be selected. Speed and intensity of the Starlight mode can be tweaked to taste.


    All custom user settings are hard written into memory when the unit is put into STANDBY mode and thus retained if power is later interrupted.


    Individual sealed gold contact relays deliver the selected input into the volume control system before hitting the first 12AT7 input tubes. Following the mighty 6414 driver/phase splitter, the trusty EL84 output stage can be switched between either 20 watts of TRIODE power or 40 watts of Ultra Linear mode push-pull operation. Individual bias for each tube is easily adjusted using the trimpots and test points, conveniently located on the top surface of the amplifier. The Stingray's power supply is extra-rugged and stiff, a MANLEY hallmark. It swims with the sharks: fast, agile, fluid, and with consummate authority.


    Post-volume SUBWOOFER OUTPUT allows easy hookup of outboard line-level driven active powered subwoofers. This output is after the volume control so that the subwoofer will track the volume level changes of the main speakers. The SUB OUTPUT is a line level and full frequency output that is AFTER the volume control so your powered subwoofer follows the same volume as your main speakers. These are unbalanced RCA jacks, line level. They feed the line inputs of your subwoofer, NOT the speaker jacks. A switchable TAPE LOOP is standard. The TAPE SEND is the output of the selected input before the volume control. The TAPE RETURN can also be used as a 5th line input if needed.


    RECORD OUT (aka Tape OUT) is BEFORE the volume control so you can record whatever input you have selected without your listening level affecting the level going to your recorder. These are unbalanced RCA's. It is UNbalanced RCA's and UNbuffered so check out the input Z to your recorder to make sure it won't load down the Stingray main input while it is plugged in. Usually with unbuffered record outs we recommend you only plug in your recorder only when you are actually recording...


    Tape LOOP: Also known as an INSERT point, the SEND or Tape Out comes off the selector switch as the Record Out option does going to your outboard EQ or Merlin BAM unit or tape recorder and then the signal returns (RETURN) to the Stingray in front of of the volume control so you can play tunes. A toggle switch selects whether the Tape LOOP (and whatever is plugged into the Tape Loop) is active or the signal goes straight through the Stingray as normal. If you have the Merlin BAM system, order your Stingray with the Tape LOOP option.


    Need more than four inputs? Get a SKIPJACK line switcher and run it into this LOOP RETURN: The SKIPJACK is perfect for adding more inputs to anything. So if you use a SKIPJACK's 4 stereo inputs plus the Stingray's 4 stereo inputs you'll get 8 stereo inputs total. The way to do that is to consider the TAPE LOOP: you can bring the SKIPJACK output into the LOOP RETURN, enact the LOOP ACTIVE switch and use the 4 x SKIPJACK inputs feeding the LOOP RETURN with the SKIPJACK controlling source switching for those 4 inputs. Then if you put the Stingray's LOOP switch to BYPASS you will be working with the 4 x Stingray inputs selectable on the Stingray. That gives you 8 total stereo inputs.


    Or if you do not want to use the TAPE LOOP feature (because you are using it for other purposes) or if you have an older Stingray without the TAPE LOOP, you can use a SKIPJACK to get up to 7 stereo line inputs by running the SKIPJACK's output into one of the Stingray's inputs.


    NOTE: The SUBWOOFER OUT, RECORD OUT, and TAPE LOOP are all passive. So are the BALANCE and VOLUME controls also passive. No active electronics or buffers are used in these circuits. The RECORD OUT comes straight off the input select switch. So whatever source is selected will show up passed through at the TAPE OUT.


    iPod Compatibility:


    iPod can play songs with the these sample rates, and with all compatible codecs



    • 8 kHz

    • 11.025 kHz

    • 16 kHz

    • 22.050 kHz

    • 32 kHz

    • 44.1 kHz


    Most iPods (except the iPod Shuffle) will play WAV and AIFF files. The iPod will play up to 16 bit/48kHz files.



    iTunes Compatibility:

    iTunes is not compatible with FLAC format files without a third party plugin.


    iTunes does support 24/96 wav files. iPod won't play them, but iTunes does support them.


    iTunes can in fact output 24/96 digitally, so in theory you could actually assemble a hi-rez music server based on iTunes, and use it to drive the DAC of your choice. Thus using your iPod docked on your Stingray iTube you can play WAV files which will yield similar audio quality to CD.


    With the Stingray, the MANLEY team has struck a remarkably harmonious balance in design which satisfies the sonic desires of the audiophile and the rocker, the artist and the musician, the student and the master, the yin and the yang.


    Manley Labs
    $6,300.00
    Manley Stingray iTube Stereo Integrated Amplifier Buy Now
  • Marantz PM8005 Integrated Amplifier Marantz PM8005 Integrated Amplifier Quick View

    $1,199.00
    Buy Now
    x

    Marantz PM8005 Integrated Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Integrated Amplifier With Power Amp Direct Input


    Combining fully discrete current feedback circuitry and our exclusive HDAM technology, the Marantz PM8005 integrated stereo amplifier delivers audiophile grade sound quality along with system operational flexibility. Rated at 70 watts per channel into 8 ohms, the PM8005 features a robust power supply along with high current capability to deliver 100 watts per channel into 4 ohms, for compatibility and operational stability with the widest range of loudspeakers.


    The versatile pre-amp section features 6 line level inputs including a phono (MM) input, and the PM8005 also includes pre-amp outputs along with a power amp direct input, which lets you use the unit as a standalone power amplifier for integration into a multi-channel home theater system. For precise sound tailoring, the PM8005 features our triple tone control system, with separate controls for the bass, midrange and treble segments. The elegant remote control features an ergonomic layout for easy operation, and includes the ability to control our companion SA8005 disc player and one of our network players.


    Marantz HDAM Technology


    The PM8005 features our exclusive HDAM (Hyper Dynamic Amplifier Module) technology, which consists of precision discrete selected circuit elements on a compact sub-board, instead of conventional op-amp integrated circuits. Multiple HDAM units are employed, including HDAM-SA3 and HDAM-SA2 versions that provide gain and buffering functions, to deliver dynamic and detailed sound quality. The PM8005 features current feedback technology for ultra low distortion and wideband response, along with superb musicality.


    High Current Power Supply


    The robust power supply features a high current toroidal main power transformer that is rated at 625VA, to easily provide extra power to the amplifier stage in order to handle demanding short term peaks. High current Shottky barrier diodes in the rectification stage are rated at 20 amps, with the ability to handle up to 180 amps peak current, providing sufficient power reserve to handle virtually any loudspeaker load.


    Fully Discrete High Current Output Stages


    The PM8005 is equipped with multiple high speed, high current power output devices that are each rated at 14 amps of current output capability, providing a very high amount of dynamic headroom, along with compatibility with lower impedance loudspeakers. For optimum heat dissipation, the PM8005 is equipped with solid aluminum power amplifier heat sinks, with a combined total radiating area of 326 square inches, eliminating the need for fans. The PM8005 is conservatively rated at 70 watts per channel into 8 ohms, and 100 watts per channel into 4 ohms, for compatibility with the widest range of loudspeakers.


    Solid Chassis Construction


    For the utmost stability and protection from induced vibrations, the PM8005 features a rugged chassis design, which includes a triple layer bottom plate. To eliminate distortion from stray magnetic fields, the high current toroidal main power transformer features double shielding.


    Versatile Pre-Amplifier Functions


    There are 6 line level inputs, to handle a wide range of sources, including a dedicated phono input (MM) that features discrete topology to deliver the utmost fidelity from your favorite vinyl recordings, and all inputs and outputs are gold-plated for optimum signal transfer. The Source Direct function bypasses unnecessary circuit blocks for the straightest path from input to the speaker terminals. Pre-amp outputs let you connect a separate stereo power amplifier for a bi-amp loudspeaker system, or for playback in a separate room. The power amp direct input lets you connect the PM8005 to another component, such as a surround sound processor, for integration within a multi-channel home theater system.


    For precision tonal balancing, we've equipped the PM8005 with our Tri-Tone control system, with separate tone controls for the bass, midrange and treble bands, which lets you fine tune the spectral balance to your preference, and is especially useful with older recordings that suffer from tonal imbalance.


    Audiophile Grade Loudspeaker Terminals


    Equipped with premium audiophile grade loudspeaker terminals that are designed to accept a wide range of speaker cable termination types, the PM8005 also features A/B speaker switching for increased system configuration flexibility.


    System Remote Control


    The elegant, ergonomically designed remote control is equipped with additional functionality, which lets you control a companion Marantz disc player (such as our SA8005) and a Marantz network audio player. Remote control input and output jacks let you directly connect the PM8005 to other Marantz components for easy system control.


    The Marantz PM8005 integrated amplifier is backed by a limited three-year warranty.


    Marantz
    $1,199.00
    Marantz PM8005 Integrated Amp Buy Now
  • Rogers EHF-100 Amplifier Rogers EHF-100 Amplifier Quick View

    $8,000.00
    Buy Now
    x

    Rogers EHF-100 Amplifier

    >
    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Never before has music sounded so good coming out of your speakers. Clarity rules with the EHF-100 and EHF-200. Trust us. Turn them on and youll be blown away by their concert hall quality. There may be other tube amps on the market, but nothing compares to the power and precision of these amps. The sound is stunning and so is the look. All you have to do is close your eyes and immerse yourself in the music.


    Proudly made in New York.


    All Roger's High Fidelity products come with a Limited Transferrable Lifetime Warranty


    Due to dealer relationships, Rogers High Fidelity cannot be shipped to Boston or NYC.


    Rogers High Fidelity
    $8,000.00
    Integrated Amplifier Buy Now
  • VPI 299D Integrated Amplifier (Open Box) VPI 299D Integrated Amplifier (Open Box) Quick View

    $2,999.99
    Buy Now
    x

    VPI 299D Integrated Amplifier (Open Box)



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Open Box


    VPI Collectible - Limited To 100


    Includes 90 Day Warranty For Tubes And 3 Year Warranty For Amplifier


    This amp is so good, I bought one myself! -Seth Frank, Owner of SoundStageDirect©


    Original created Harry Weisfeld long time family friend Steve Leung (VAS) collaborated together to bring back one of their favorites, the Scott 299D integrated amp. The integrated has a phono stage, amplifier, and headphone amp built right in. The Limited Edition has been restricted to 100 so grab this VPI collectible while you can.


    Demo Discounts
    $2,999.99
    VPI 299D Integrated Amplifier (Open Box) Buy Now
  • Integrated Amplifier A70.2 Integrated Amplifier A70.2 Quick View

    $1,499.99
    Buy Now
    x

    Integrated Amplifier A70.2


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The a70.2, our most powerful integrated amplifier to date, impresses with its brawn yet wows with its delicacy. The engulfing soundstage presented and engaging sonic character are the direct result of our brilliant circuit design and careful attention placed on the critical elements for accurate and musical sound reproduction while eliminating all unnecessary bits. Geared primarily toward the music lover with a two channel audio system, we have included a direct av input (home theater bypass), for those that want to use the amplifier section of the a70.2 to power the front channels in a home theater set-up. Vinyl fans will rejoice over the exceptional moving-magnet phono preamp. Constructed using the finest parts and hand assembled, the a70.2 is the ideal component around which to build a stunning audio system.


    This product is not eligible for discount.


    Music Hall
    $1,499.99
    Music Hall A70.2 Integrated Amp Buy Now
  • Evolution 50A V2 2 COLORS AVAILABLE Evolution 50A V2 Quick View

    $1,195.00
    Buy Now
    x

    Evolution 50A V2





    Creek Audio has a long history of making fine sounding Phono pre-amplifiers.


    This new amplifier forms part of the next generation EVOLUTION 50 range of products. Housed in a slim case with engraved front panel and solid
    control knobs, it's finished in either black or silver brushed aluminium. An ingenious new push button design has been developed for it, offering excellent tactile feel and backlit optical indication of usable functions for optimum user-friendliness.


    The 50 series is the first Creek product to feature an OLED (Organic Light Emitting Diode) display. This white on black display provides higher clarity and resolution than a normal display and offers a wide range of customised graphic symbols. Display brightness levels can be changed or turn off when not required via the menu system.


    At the heart of any good amplifier lies a good power supply; The EVOLUTION 50A uses a massive 200 Watt toroidal mains transformer with separate windings for high and low current analogue and digital circuitry. This produces a good power to weight ratio and low magnetic interference. Creek's policy of paralleling several low impedance capacitors together, to create an ultra-high specification capacitor, to smooth the DC also helps to produce a very powerful and accurate sound from such a relatively small amplifier.


    Creek's Senior Engineer - David Gamble - who has much experience in the audio industry developed a completely new bi-polar transistor power amplifier circuit especially for the EVOLUTION 50A with very high open-loop gain and low distortion. Featuring a pair of Sanken 15 Amp power transistors, with built-in thermal compensation for rapid bias tracking performance, the Power Amplifier circuit has very low output impedance and can produce high output current. This combination will provide exceptional speed and control with most loudspeakers.


    David also developed a completely new analogue Pre-amp circuit, providing high levels of flexibility and control, via unbalanced or balanced inputs. It has multiple input options, switched electronically or via gold contact relays, plus electronic Volume, Balance and Tone controls. For Vinyl fans, a Sequel 2 Phono pre-amp can be plugged-in, substituting Line Input 1 for Phono. In addition, Line input 5 is located on a Smart- Slot removable panel. Should the user want to fit a Tuner or DAC module, Line 5 input can be removed and replaced by either the AMBIT tuner or RUBY module.


    Creek Audio no longer makes a separate EVOLUTION Tuner, but die-hard analogue tuner fans can continue to listen using the top quality AMBIT plug-in tuner module, which augments the EVOLUTION 50A's capabilities. The AMBIT and Ruby modules can be mounted to the back panel 'Smart-Slot', replacing Line Input 5. When the AMBIT is fitted, it automatically turns the amp into a Receiver, suitable for use in every region of the world. The OLED shows tuner functions and buttons and knobs have dual functions.


    The EVOLUTION 50A can also be configured for Vinyl Disc input, in place of Line input 1. The SEQUEL 2 module plugs into dedicated connectors on the pre-amp PCB and can run simultaneously with the AMBIT or RUBY. It comes in three versions - 40dB - 48dB and 54dB MM and MC.


    To simplify the many options a stylish new system remote handset has been developed to control all the functions of the EVOLUTION 50 range. The EVOLUTION 50 range also features an optional IR extender to enable the products to be hidden away, but still operable via remote control.


    This product is not eligible for discount.


    Creek Audio
    $1,195.00
    Integrated Amplifier
    Buy Now
  • Lehmann Linear USB - Silver Amplifier (On Sale) Lehmann Linear USB - Silver Amplifier (On Sale) On Sale Quick View

    $1,399.00 $1,119.00 Save $280.00 (20%)

    Buy Now
    x

    Lehmann Linear USB - Silver Amplifier (On Sale)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Computer and High End audio are no longer a contradiction. Do you have any idea how great your headphones could really sound playing files from your computer? Try out the Linear USB now and be surprised!


    The Linear USB built-in DAC is meticulously built with an integrated Burr Brown DAC and separate voltage regulators of highest quality. The USB connector is only used to transport the signal and not as a power supply.


    The Linear USB is a high end headphone amplifier that will satisfy even the highest requirements for quality headphone music reproduction.


    The selectable gain (0 dB, 10 dB, 20 dB) of the Linear USB effectively optimizes the output level of the zero global feedback Class A output stage. Practically all high quality dynamic headphones available will show their best possible performance. Carefully selected top notch components and a highly sophisticated circuit design guarantee top performance listening pleasure.


    Perfect pre-amp for simples stereo setups.

    For stereo setups consisting of your computer and an additional analog source like a CD player or a turntable with a phono stage the Linear USB is the simplest and most effective active preamp one can think of. You don't even have to care about input switching because the unit detects the USB audio signal automatically!


    The faceplate and the massive milled aluminium knob for the smooth running 27 mm ALPS high grade volume control are available in anodized black or silver.


    To get the best out of your headphone from your computer you will have to try the Linear USB.


    Lehmann Audio
    $1,399.00 $1,119.00 Save $280.00 (20%)
    Headphone Amplifier Buy Now
  • Decco65 Integrated Amplifier (High Gloss Black) Decco65 Integrated Amplifier (High Gloss Black) Quick View

    $899.00
    Buy Now
    x

    Decco65 Integrated Amplifier (High Gloss Black)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Simplicity = Performance

    The only thing left to add to the decco65 is your computer or streamer and speakers. Simple and elegant for the way you listen. The decco65 has the inputs you really need for sources you use. Few are "analog" today, yet most integrated amplifiers on the market support analog only. The decco65 was designed to enhance any digital source, from mp3 to full 24/192 on your computer to the Apple TV, Sonos, music servers, internet radio or whatever source you choose.


    The Reasons It Sounds So Good


    • The ESS Sabre Digital to Analog Converter is widely recognized as the world's best DAC when dealing with hostile digital components like computers and streamers.

    • The 24/192 Asynchronous USB Input provides the best possible processing from this port and furthers the efforts of the ESS Sabre DAC.

    • Galvanic Isolation Typically reserved for more expensive DAC circuits, galvanic isolation prevents electrical noise from entering the DAC board on all grounded digital inputs.

    • Galvanic Isolation Typically reserved for more expensive DAC circuits, galvanic isolation prevents electrical noise from entering the DAC board on all grounded digital inputs.

    • The Tube Buffer uses a stereo triode 6N1P to smooth the harsh digital edge found in poor recordings and compressed audio.

    • The Amplifier uses the same technology found in very expensive premium amplifiers.

    • The Headphone Amp switches the speakers off when your headphones are inserted, so even when a quiet environment is required, you can still fill your head with lush high resolution music.



    Digital to Analog Converter

    The ESS Sabre Digital to Analog Converter is widely recognized as the worlds best DAC when dealing with hostile digital components like computers and streamers. Jitter is all but eliminated leaving a beautiful digital canvas as a base. The art of this DAC comes in with the hundreds of additional parts and multiple power supplies designed around the ESS chip that work in unison to produce the Peachtree sonic signature.


    Real-world Performance

    The 24/192 Asynchronous USB Input provides the best possible processing from this port and furthers the efforts of the ESS Sabre DAC. Asynchronous communication allows a high precision clock inside the decco65 to control the timing of the bitstream from the computer to the DAC. USB implementation is one of the more difficult tasks in the real world of computer audio.


    Galvanic Isolation

    Typically reserved for more expensive DAC circuits, galvanic isolation prevents electrical noise from entering the DAC board on all grounded digital inputs. Any contamination due to the switching power supply, multiple ground points, and high speed processing is isolated from the DAC so nothing but pure 1s and 0s reach the DAC circuit.
    The Tube Buffer uses a stereo triode 6N1P to smooth the harsh digital edge found in poor recordings and compressed audio. It can be switched on or off from the remote control to match your preference at any given time. We find it especially good for Pandora, MOG, Spotify and most cloud-based listening.


    Beautifully Amplified

    The Amplifier section of the decco65 uses the same technology found in very expensive premium amplifiers. This high performance Class D design has the ability to drive 65 watts per channel into 8 and 95 watts per channel into 4 with a very natural sound. The decco65 has the sonic signature of a great A/B amp with the power efficiency of Class D. Its combination of low distortion, high bandwidth, and energy efficiency makes it the ideal partner to the decco65 digital front end and hybrid tube preamp.


    Just You and Your Music

    The Headphone Amp in the decco65 switches the speakers off when your headphones are inserted, so even when a quiet environment is required, you can still fill your head with lush high-resolution music. The headphone output runs through the tube stage so you can enjoy that smooth tube sound in solitude.


    Peachtree Audio
    $899.00
    Decco65 Integrated Amplifier Buy Now
  • Dali Zensor 1 Speakers - Walnut Dali Zensor 1 Speakers - Walnut Quick View

    $395.00
    Buy Now
    x

    Dali Zensor 1 Speakers - Walnut

    What



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    You know a company's on to a winner when the biggest criticism we can level at its speakers is that the grilles could be a bit easier to put on and take off...

    - What HiFi


    Making sense! That's what ZENSOR 1 is up to, packing as much legacy and music as possible into a slim and compact bookshelf speaker cabinet that you can carry home under your arm.


    The versatile ZENSOR 1 is ideal as all-round stereo loudspeaker preferably in small to medium sized rooms. It even works excellently as front speaker in a 2.1 surround set-up or as back speaker in 5.1 systems including subwoofer, as the distinguished and discreet sound resource it is.


    Distinguished by it well-known DALI signatures such as the light and yet stiff wood fibre cones delivering a highly dynamic, detailed, and undisturbed sound reproduction, while ultra-low mass dome tweeter material ensures a widely extended frequency range.


    Discreet by its dimensions (H: 27.4 x W: 16.2 x D: 22 cm), 6-litre cabinet, and its design dressed in a high-gloss lacquer front baffle that blends perfectly into a modern day interior.


    The soundproof design ideas of DALI provide the background for ZENSOR 1, created in respect and admiration of music. From the overall and basic properties to any detail such as the integrated wall bracket, rounded edges, and rear-mounted bass reflex port.


    ZENSOR 1 simply succeeds in converting amplifier power into pure acoustical energy without loss or limitations, and it will give pleasure to your ears and eyes over and over with focused, coherent sound and a stylish, visual identity.


    Dali Speakers
    $395.00
    Dali Zensor 1 Walnut - Pair Buy Now
  • Klipsch R-15PM Powered Monitor Speaker (Pair) Klipsch R-15PM Powered Monitor Speaker (Pair) Quick View

    $499.00
    Buy Now
    x

    Klipsch R-15PM Powered Monitor Speaker (Pair)



    The R-15PM powered monitors provide room-filling sound while being compact enough to use anywhere. This extremely efficient, powerful yet simple speaker surrounds listeners in their favorite movies and music. Included with each speaker is a 1 aluminum diaphragm compression driver matched to 90° x 90° square Tractrix Horn and 5.25 copper spun magnetically shielded IMG woofer


    Designed For Simple Set Up With Your Turntable, Television, Computer Or Wireless Device.

    Featuring an integrated phono pre-amp, Bluetooth® wireless technology, digital optical, analog RCA and USB inputs, the R-15PM is the most exceptional, versatile monitor in the world.


    High Efficiency Amplification

    No need to worry about the expense, clutter and hassle of an external A/V receiver. The R-15PM monitors feature individual ultra-low noise amplifiers custom built to maximize system performance and eliminate the necessity external amplification.


    Full Featured IR Remote

    Provides easy access to system features such as dedicated source selection, track controls, and play/pause.


    System Expandability

    Allows the addition of a subwoofer to further enhance low frequencies.





    rockrollkeepers


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Klipsch Speakers
    $499.00
    R-15PM Powered Monitor Speaker - Pair Buy Now
  • Rega Elicit-R Amplifier Rega Elicit-R Amplifier Quick View

    $2,999.00
    Buy Now
    x

    Rega Elicit-R Amplifier

    40th



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    What


    Introduction

    Rega is very proud to introduce a brand new high performance integrated amplifier. Designed and engineered to the highest standard to deliver the best possible audio performance whilst remaining simple to use and easy to setup.


    Our recent development work in amplifier design circuitry has allowed us to further advance the Elicit-R performance by using new and improved power amplifier circuits (based around the hugely successful Rega Brio-R amplifier). Combined with FET discrete line pre-amplifiers and a programmable stepped attenuator volume control ensuring greater levels of performance and control over the delivery of power. The Elicit-R is supplied with the new Solaris system remote handset offering full control over this and all of the current R range of electronics.


    Technology

    The output amplifier used in the Elicit-R was born after extensive research by our engineers to develop a low source Class-A* driver stage. Based around a complementary pair of Darlington output transistors forming an emulated Class-A driver stage.


    Features

    The Elicit-R includes a high quality built in moving magnet phono stage designed to maximise the potential of your vinyl system. A simple switch on the rear panel allows the same input to be switched to a secondary set at line level. This input is specially configured to offer further isolation and reduce noise. This makes it ideally suited for connection of more sensitive products such as an external MM or MC phono stage.


    If your system is not vinyl based the same socket allows this line input to be used with any line level product (such as a CD player or DAC) ensuring maximised connectivity via the back panel. These features coupled with Polypropylene capacitors throughout the signal path, improved power supplies, increased output power to 100 watts per channel all housed in a brand new custom designed case combine to give the best performance Elicit to date.


    *The design of the Elicit-R benefits greatly from running warm. To ensure best performance it is recommended to allow the unit to reach optimum temperature before critical listening.


    Rega
    $2,999.00
    Rega Elicit-R Amplifier Buy Now
  • Marantz PM5005 Integrated Amplifier Marantz PM5005 Integrated Amplifier Quick View

    $499.00
    Buy Now
    x

    Marantz PM5005 Integrated Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    New to the Marantz collection, this excellent entry-level integrated amplifier breaks all the rules. That's because it's the first in its class to offer current feedback architecture - a feature that normally is reserved for the more expensive models. This technology provides very fast and accurate signal handling, which results in perfectly balanced stereo sound reproduction as well as a very open and precise sound stage. It's also been recently enhanced with performance-optimising discrete audio circuitry and fine-tuning components. In addition, this year's model looks a little more stylish than last year's, thanks to new elegant knob design. On top of that, it comes with a new remote and a new low-power stand-by and auto stand-by mode.


    Marantz
    $499.00
    Marantz PM5005 Integrated Amp Buy Now
  • VPI 299D Integrated Amplifier VPI 299D Integrated Amplifier Quick View

    $3,999.99
    Buy Now
    x

    VPI 299D Integrated Amplifier



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    VPI Collectible - Limited To 100


    Includes 90 Day Warranty For Tubes And 3 Year Warranty For Amplifier


    This amp is so good, I bought one myself! -Seth Frank, Owner of SoundStageDirect©


    Original created Harry Weisfeld long time family friend Steve Leung (VAS) collaborated together to bring back one of their favorites, the Scott 299D integrated amp. The integrated has a phono stage, amplifier, and headphone amp built right in. The Limited Edition has been restricted to 100 so grab this VPI collectible while you can.


    VPI Amplifier
    $3,999.99
    VPI 299D Integrated Amplifier Buy Now
  • Rega Brio Integrated Amplifier Rega Brio Integrated Amplifier Quick View

    $995.00
    Buy Now
    x

    Rega Brio Integrated Amplifier




    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The Brio has a completely new case to house its improved circuits and parts. It now sits in a fully aluminium two-part case which boosts the Brio's heat sinking capabilities and improves on Rega's already solid build quality and reliability. The new Brio has a cleverly integrated headphone socket specially designed to avoid interference with the audio circuit when not in use and as you would expect, a very high specification moving magnet phono stage is built in as standard.


    Throughout the design process the Brio has been meticulously improved in every aspect, from the quality of materials to the manufacturing process, to make this new Brio a step ahead in Rega's engineering and design for amplifiers.


    Brand new case design.

    The sleek and minimal look was designed to bring elegance to Rega's classic style but still harks back to the swooped features hidden away in Rega's past amplifiers. Combining all these aspects makes this Brio case a unique standpoint amongst the competition.


    Re-designed circuit.

    Key improvements have been made to the circuits. The PCB layout has been fully upgraded to handle higher specifications for all critical parts. A second raw power supply has been added to provide further isolation between output stage and the driver stage/line and phono amplifiers. This improves the isolation between high and low level signal stages of the amplifier. Higher specification MUSES operational amplifiers have been used in the line and phono amplifier.


    Headphone Socket.

    For convenience, the Brio has the capability to drive standard hi-fi headphones from the internal amplifier. Adding a headphone socket was only possible by finding a way to reduce its impact on the main signal path so it doesn't disrupt the overall sound quality. We have paid special attention to the switch that deactivates the main speakers.


    Rega
    $995.00
    Brio Integrated Amplifier Buy Now
  • Rega Elex-R Amplifier Rega Elex-R Amplifier Quick View

    $1,695.00
    Buy Now
    x

    Rega Elex-R Amplifier

    40th



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The Elex-R is a sublime blend of the Brio-R design with the power circuits and advanced phono stage of the Elicit-R. Rega's engineers have achieved the perfect balance of power, control and dynamics, delivering a performance that always puts the music first.


    You will find plenty of connectivity options allowing complete flexibility and integration within the rest of the Rega range.


    Design Innovation


    The Elex-R is built to the highest standard and designed to deliver the best possible audio performance whilst remaining simple to use and easy to setup.The Elex-R is built into the full width Rega case with increased heat dissipation, which along with a larger transformer enables the Elex-R to deliver 90 Watts per channel into 6 and 72.5 Watts per channel into a design centre rating of 8.


    Our time, effort & money have been spent on developing the circuit and construction utilizing the highest specification of components throughout. As part of the design we have included useful features like pre-amplifier output, to enable the new Elex-R amplifier to be used in a wide combination of systems and have avoided superfluous gadgets such as tone controls or a headphone socket as they can obstruct the signal path and degrade the produced sound quality.


    The Elex-R has been built to Rega's extremely high standards of reliability and quality to ensure many years of musical enjoyment. The primary function of an amplifier is to boost and equalize the low level signal generated by a phono cartridge, DAC and CD player or other source component to a level that can drive the loudspeakers. It is vital that the amplifier achieves this whilst minimising distortion, as this would directly affect the music. The distortion level is typically 0.007%; just under the clipping of the output.


    The volume control and pre-amplifier used in the Elex-R is designed to overcome the problems associated with the standard arrangement. This design uses a custom chip along with peripheral support IC's like a microcontroller and a custom made rotary volume control.


    The Elex-R uses a combined feedback and passive volume control, where the feedback and input levels are varied to set the required volume level. The level and tracking between the two channels is set by the close tolerance parts in the pre-amplifier circuit and less by the actual potentiometer itself, thus keeping the mismatch of channels due to volume control tracking irregularities to a minimum.As well as keeping tracking irregularities to a minimum, this method also reduces noise and input overload as the control will only 'use' the required gain to amplify the signal.This form of volume control is normally only found in professional broadcast environments where accurate low noise control of levels is required.


    Power Amplifier Technology


    The output amplifier used in the Elex-R, Elicit-R and Brio-R was born after extensive research by our engineers to develop a low source impedance emitter follower Class-A driver stage. This is based around a complementary pair of 150w Sanken Darlington output transistors. The technical and sonic improvement gained by the use of low impedance drivers is well known, however, it can feature high standing currents in the driver stage when using standard transistor configurations. By combining the low impedance driver with the Sanken Darlington transistors (with their imbedded thermal bias network running at a lower standing current) this combination forms a complementary emitter follower emulating Class-A conditions with good thermal stability with lower standing.


    Rega Integrated Amps
    $1,695.00
    Rega Elex-R Amplifier Buy Now
  • Marantz HD-DAC Headphone Amplifier Marantz HD-DAC Headphone Amplifier Quick View

    $799.00
    Buy Now
    x

    Marantz HD-DAC Headphone Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Marantz HD-DAC1 Headphone Amplifier with DAC-mode


    This ultra-high quality dedicated Headphone Amplifier creates simply amazing sound because it uses Current Feedback amplification technologies from Marantz's high-end Premium 11 Series. Headphones have always added extra intensity to music, now with the Marantz HD-DAC1 that intensity reaches new climactic heights. This completely new product category comes with a new design, but as always with the unmistakable Marantz family resemblance.


    The powerful HD-DAC1 can drive audiophile high-impedance headphones up to 600 ohm - with complete MODE ease. All thanks to its three-level gain control, Marantz HDAM-SA2 modules, a high current audiophile DAC (CS4398), and its Premium Quality fixed and variable RCA outputs. It is so powerful it not only drives headphones, you can also directly connect it to your Hi-Fi integrated amplifier or to a pair of active speakers or power amps. It's also highly connectable.


    Optical and coaxial digital inputs as well as a USB-B port enable you to stream music directly from your PC or MAC; iDevices can also be connected via the USB port on the front. For even more connectivity we have also included an analog input. The USB-B works in asynchronous mode to support not only 192 kHz / 24bits high-resolution audio but also the DSD 2.8MHz and 5.6MHz for maximized performance and the most direct way to enjoy excellent quality. To safeguard quality when connected to a computer, we built extended isolation around the USB-B input to eliminate the chance of a high frequency noise being generated by the computer when entering the HD-DAC1. We even included a jitter remover and Dual Clock for extreme accuracy. Info on volume, input, resolution, etc. is shown on the stylish Marantz Porthole Display. The solid aluminum front is supported by a double layer bottom plate and retro-style side panels. Pure craftsmanship.


    Marantz
    $799.00
    Headphone Amplifier Buy Now
  • Rega Osiris Integrated Amplifier Rega Osiris Integrated Amplifier Quick View

    $9,995.00
    Buy Now
    x

    Rega Osiris Integrated Amplifier


    40th



    2010 2012


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Introducing the Rega Osiris flagship integrated amplifier


    The Osiris is the culmination of Rega engineers 32 years experience in solid-state amplifier development. A no compromise audio amplifier using state of the art surface mount technology and a fully symmetrical circuit.


    Design


    A super high performance, 162 Watts into 8 Ohms (250 Watt 4 Ohms) dual mono amplifier housed in a custom Rega CNC machined aluminium case with high thermal efficiency heat sinks. Designed around minimalist high gain power amplifier and passive pre-amplifier circuit topology, a passive volume control and a single stage of power amplification between the input and the speakers the Osiris offers unrivalled performance and build quality.


    Technology


    The Osiris uses a low distortion high linearity and bandwidth common base voltage amplifier driver stage. This type of symmetrical circuit topology will provide the necessary voltage swings to enable the Osiris to drive any speaker system with the minimum of distortion. Eight Sanken 200 Watt output transistors are used in a triple high current output stage enabling the Osiris to drive even the most awkward of speaker systems with ease.


    The cascoded differential input amplifier uses two low noise LED referenced current generators. The open & closed loop feedback levels and gain bandwidth product components are optimised to give a tight and controlled sound stage, especially at the low frequency end of the audio range. Nichicon audio grade capacitors are used in bypass and decoupling positions.


    Electrolytic capacitors have been bypassed with polyester capacitors where necessary improving on the HF performance. Low inductance film SM power resistors are used in the output stage.


    Power Supply


    The Osiris uses two low noise purpose designed 400VA toroidal transformers using high-grade fully bonded core material.


    The transformers are mounted to the chassis using Rega's innovative mounting technique, which eliminates noise being transferred from the transformer to the case when the transformers are operating under arduous mains (line) conditions with high levels of asymmetric mains (line) distortion.


    These transformers combined with 40,000 Micro Farads of Rega K-Power smoothing capacitors per channel, provide more than enough current to drive the hardest of loads. All the power supplies utilise fast recovery rectifier diodes throughout. (Fast diodes generate less high frequency switching noise therefore giving rise to a cleaner DC).


    The input and low-level driver stages are fed from a regulated symmetrical tracking power supply with a low noise voltage reference, which provides a fully stabilised low noise voltage, ensuring the highest level of sonic purity.


    All the dedicated audio power supplies feed only the audio circuits. The input switching, display & micro controller and protection circuits have their own dedicated supplies, keeping the audio signal path as pure as possible.


    We hope that you enjoy this product as much as we have enjoyed creating it. - Rega


    All these features amalgamate to create the supreme level of performance found in the Osiris and provide a perfect partner for the Rega Isis Cd player.


    Rega Osiris
    $9,995.00
    Rega Osiris Integrated Amp Buy Now
  • Cayin A-50T Tube Integrated Amplifier (with Phono Stage) Cayin A-50T Tube Integrated Amplifier (with Phono Stage) Quick View

    $1,800.00
    Buy Now
    x

    Cayin A-50T Tube Integrated Amplifier (with Phono Stage)

    Stereophile Stereophile



    The Cayin A-50T is the best low-price amp I have ever heard, and it rivals some of the best amps in any price range.

    - Harry Weisfeld, owner of VPI Industries


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Includes Phono Stage


    A beautifully-crafted, hand-made tube piece manufactured to deliver the sound of the classic Marantz 8B


    The Cayin Audio A-50T uses four EL34s for Class A/B1 P.P amplification. The craftsmanship is absolutely first-rate, featuring point-to-point wiring, and each unit is hand-initialed by a quality-control inspector. The toroid power transformer and EI audio transformer are specially manufactured for the A-50T with low magnetic leakage, wide frequency response and low impedance. Two 12AX7EHs and two 12AU7s are used in the preamplifier. One very cool feature is the ability to switch between ultralinear and triode by remote control.


    This piece was hand-built with extreme attention to detail, including point-to-point wiring. Point-to-point was the way that amps used to be wired back in the 1950s and '60s when cost was not the primary objective. Nowadays, most everything contains circuit boards instead of this point-to-point wiring, which is much more dependable and better performing. The bottom line is that point-to-point wiring sounds better. It's one of the main reasons why these Cayin pieces sound like the classic tube gear from Marantz and McIntosh. Anymore, products that feature point-to-point wiring cost a fortune, or they feature sub-par workmanship. You simply are not going to find craftsmanship like with this Cayin gear for anywhere close to this price.


    There are output taps for 4 or 8 ohms. This allows you to fine-tune the sound that you desire. Switching is simple, and listening to the differences is a lot of fun. There is a removable cage, included at no extra charge. The cage snaps into place simply, so that you can take it on and off with no problem. Keep it on if you're worried about protecting your tubes, or take it off to show what real, heavy-duty, classic tube gear looks like. Turn off the lights and watch 'em glow.


    Cayin
    $1,800.00
    Cayin A-50T Tube Integrated Amp with Phono Stage Buy Now
  • Marantz PM7005 Integrated Amplifier (With USB-DAC) Marantz PM7005 Integrated Amplifier (With USB-DAC) Quick View

    $999.00
    Buy Now
    x

    Marantz PM7005 Integrated Amplifier (With USB-DAC)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Integrated Amplifier With USB-DAC


    The PM7005 is a fully discrete, current feedback integrated amplifier with USB-DAC functionality. It is simply perfect for audiophiles wanting both excellent music quality and a maximum of flexible operation, which is provided by the highly versatile DAC-mode.


    Marantz
    $999.00
    Marantz PM7005 Integrated Amp Buy Now
Go to top