Vinyl. Our way of life since 2004 (877) 929-8729

VPI Dealer Authorized & Certified
Site Search
Menu Free shipping on domestic orders over $49.99! - We ship worldwide!
LP20 - 20% Off Vinyl
Home > Products for: '

Integrated Amp

'
  • 1
  • 2
Results per page:
  • Rega Brio-R Integrated Amp (Certified Pre-Owned) Rega Brio-R Integrated Amp (Certified Pre-Owned) Quick View

    $699.00
    Buy Now
    x

    Rega Brio-R Integrated Amp (Certified Pre-Owned)



    40th


    2011 2012


    Certified Pre-Owned


    The Brio-R embodies all the necessary ingredients. Substantial toroidal transformer, generous power supply components, rugged output stage, the use of film capacitors in the signal path and at all critical positions within the phono amplifier.


    New output amplifier


    Developed by our engineers a newly designed output amplifier using a low source impedance emitter follower Class A driver stage. Based around a complementary pair of 150w Sanken Darlington output transistors, this combination forms a complementary emitter follower emulating Class A conditions with good thermal stability and lower standing currents in the driver stage.


    Remote Control


    Remote control has been added to the Brio-R without compromising the sonic design of the amplifier. This was achieved by keeping the remote circuit separate to the audio circuit and having its own dedicated power supply.


    There is no direct contact between the micro-controller and the signal path, the micro-controller controls the relays whilst the volume control motor uses DC control voltages.


    High quality components


    The Brio-R utilises the highest quality components and our engineers' experience to achieve the best sonic performance, ensuring it is the most advanced and feature packed Brio to date.


    Improved power supplies


    During the Brio-R design process Rega reviewed the circuit and improved the low and high current power supplies, coupling and bypass capacitors. The phono stage has been improved to reflect the current improvements in the Rega Planar turntables, where the input sensitivity has been increased along with a revision of the sub 100Hz part of the phono frequency response.


    Custom Case & Design


    Housed in a brand new custom case the Brio-R draws on the pedigree of the previous three incarnations of this model. The sonic recipe for the Brio-R embodies the best in traditional audio circuits with excellent engineering practice.


    Demo Discounts
    $699.00
    Integrated Amp (Certified Pre-Owned) Buy Now
  • Integrated Amplifier A15.3 Integrated Amplifier A15.3 Quick View

    $549.99
    Buy Now
    x

    Integrated Amplifier A15.3


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The a15.3 presents a smart alternative to surround sound receivers and all in one systems. It's the perfect choice for someone looking to assemble their first hi end audio system. Partner it with the matching c-dac15.3 dac cd player and one of our turntables for a great sounding system. Connecting a turntable couldn't be easier with the built-in moving magnet phono preamp. The amp delivers an impressive 50 watts/channel, which is plenty of power to drive the majority of loudspeakers on the market.


    Music Hall
    $549.99
    Music Hall A15.3 Integrated Amp Buy Now
  • Decco65 Integrated Amplifier (High Gloss Black) Decco65 Integrated Amplifier (High Gloss Black) Quick View

    $899.00
    Buy Now
    x

    Decco65 Integrated Amplifier (High Gloss Black)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Simplicity = Performance

    The only thing left to add to the decco65 is your computer or streamer and speakers. Simple and elegant for the way you listen. The decco65 has the inputs you really need for sources you use. Few are "analog" today, yet most integrated amplifiers on the market support analog only. The decco65 was designed to enhance any digital source, from mp3 to full 24/192 on your computer to the Apple TV, Sonos, music servers, internet radio or whatever source you choose.


    The Reasons It Sounds So Good


    • The ESS Sabre Digital to Analog Converter is widely recognized as the world's best DAC when dealing with hostile digital components like computers and streamers.

    • The 24/192 Asynchronous USB Input provides the best possible processing from this port and furthers the efforts of the ESS Sabre DAC.

    • Galvanic Isolation Typically reserved for more expensive DAC circuits, galvanic isolation prevents electrical noise from entering the DAC board on all grounded digital inputs.

    • Galvanic Isolation Typically reserved for more expensive DAC circuits, galvanic isolation prevents electrical noise from entering the DAC board on all grounded digital inputs.

    • The Tube Buffer uses a stereo triode 6N1P to smooth the harsh digital edge found in poor recordings and compressed audio.

    • The Amplifier uses the same technology found in very expensive premium amplifiers.

    • The Headphone Amp switches the speakers off when your headphones are inserted, so even when a quiet environment is required, you can still fill your head with lush high resolution music.



    Digital to Analog Converter

    The ESS Sabre Digital to Analog Converter is widely recognized as the worlds best DAC when dealing with hostile digital components like computers and streamers. Jitter is all but eliminated leaving a beautiful digital canvas as a base. The art of this DAC comes in with the hundreds of additional parts and multiple power supplies designed around the ESS chip that work in unison to produce the Peachtree sonic signature.


    Real-world Performance

    The 24/192 Asynchronous USB Input provides the best possible processing from this port and furthers the efforts of the ESS Sabre DAC. Asynchronous communication allows a high precision clock inside the decco65 to control the timing of the bitstream from the computer to the DAC. USB implementation is one of the more difficult tasks in the real world of computer audio.


    Galvanic Isolation

    Typically reserved for more expensive DAC circuits, galvanic isolation prevents electrical noise from entering the DAC board on all grounded digital inputs. Any contamination due to the switching power supply, multiple ground points, and high speed processing is isolated from the DAC so nothing but pure 1s and 0s reach the DAC circuit.
    The Tube Buffer uses a stereo triode 6N1P to smooth the harsh digital edge found in poor recordings and compressed audio. It can be switched on or off from the remote control to match your preference at any given time. We find it especially good for Pandora, MOG, Spotify and most cloud-based listening.


    Beautifully Amplified

    The Amplifier section of the decco65 uses the same technology found in very expensive premium amplifiers. This high performance Class D design has the ability to drive 65 watts per channel into 8 and 95 watts per channel into 4 with a very natural sound. The decco65 has the sonic signature of a great A/B amp with the power efficiency of Class D. Its combination of low distortion, high bandwidth, and energy efficiency makes it the ideal partner to the decco65 digital front end and hybrid tube preamp.


    Just You and Your Music

    The Headphone Amp in the decco65 switches the speakers off when your headphones are inserted, so even when a quiet environment is required, you can still fill your head with lush high-resolution music. The headphone output runs through the tube stage so you can enjoy that smooth tube sound in solitude.


    Peachtree Audio
    $899.00
    Decco65 Integrated Amplifier Buy Now
  • Cayin A-50T Tube Integrated Amplifier (with Phono Stage) Cayin A-50T Tube Integrated Amplifier (with Phono Stage) Quick View

    $1,800.00
    Buy Now
    x

    Cayin A-50T Tube Integrated Amplifier (with Phono Stage)

    Stereophile Stereophile



    The Cayin A-50T is the best low-price amp I have ever heard, and it rivals some of the best amps in any price range.

    - Harry Weisfeld, owner of VPI Industries


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Includes Phono Stage


    A beautifully-crafted, hand-made tube piece manufactured to deliver the sound of the classic Marantz 8B


    The Cayin Audio A-50T uses four EL34s for Class A/B1 P.P amplification. The craftsmanship is absolutely first-rate, featuring point-to-point wiring, and each unit is hand-initialed by a quality-control inspector. The toroid power transformer and EI audio transformer are specially manufactured for the A-50T with low magnetic leakage, wide frequency response and low impedance. Two 12AX7EHs and two 12AU7s are used in the preamplifier. One very cool feature is the ability to switch between ultralinear and triode by remote control.


    This piece was hand-built with extreme attention to detail, including point-to-point wiring. Point-to-point was the way that amps used to be wired back in the 1950s and '60s when cost was not the primary objective. Nowadays, most everything contains circuit boards instead of this point-to-point wiring, which is much more dependable and better performing. The bottom line is that point-to-point wiring sounds better. It's one of the main reasons why these Cayin pieces sound like the classic tube gear from Marantz and McIntosh. Anymore, products that feature point-to-point wiring cost a fortune, or they feature sub-par workmanship. You simply are not going to find craftsmanship like with this Cayin gear for anywhere close to this price.


    There are output taps for 4 or 8 ohms. This allows you to fine-tune the sound that you desire. Switching is simple, and listening to the differences is a lot of fun. There is a removable cage, included at no extra charge. The cage snaps into place simply, so that you can take it on and off with no problem. Keep it on if you're worried about protecting your tubes, or take it off to show what real, heavy-duty, classic tube gear looks like. Turn off the lights and watch 'em glow.


    Cayin
    $1,800.00
    Cayin A-50T Tube Integrated Amp with Phono Stage Buy Now
  • Integrated Amplifier A70.2 Integrated Amplifier A70.2 Quick View

    $1,499.99
    Buy Now
    x

    Integrated Amplifier A70.2


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The a70.2, our most powerful integrated amplifier to date, impresses with its brawn yet wows with its delicacy. The engulfing soundstage presented and engaging sonic character are the direct result of our brilliant circuit design and careful attention placed on the critical elements for accurate and musical sound reproduction while eliminating all unnecessary bits. Geared primarily toward the music lover with a two channel audio system, we have included a direct av input (home theater bypass), for those that want to use the amplifier section of the a70.2 to power the front channels in a home theater set-up. Vinyl fans will rejoice over the exceptional moving-magnet phono preamp. Constructed using the finest parts and hand assembled, the a70.2 is the ideal component around which to build a stunning audio system.


    This product is not eligible for discount.


    Music Hall
    $1,499.99
    Music Hall A70.2 Integrated Amp Buy Now
  • Marantz PM5005 Integrated Amplifier Marantz PM5005 Integrated Amplifier Quick View

    $499.00
    Buy Now
    x

    Marantz PM5005 Integrated Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    New to the Marantz collection, this excellent entry-level integrated amplifier breaks all the rules. That's because it's the first in its class to offer current feedback architecture - a feature that normally is reserved for the more expensive models. This technology provides very fast and accurate signal handling, which results in perfectly balanced stereo sound reproduction as well as a very open and precise sound stage. It's also been recently enhanced with performance-optimising discrete audio circuitry and fine-tuning components. In addition, this year's model looks a little more stylish than last year's, thanks to new elegant knob design. On top of that, it comes with a new remote and a new low-power stand-by and auto stand-by mode.


    Marantz
    $499.00
    Marantz PM5005 Integrated Amp Buy Now
  • VPI 299D Integrated Amplifier (Open Box) VPI 299D Integrated Amplifier (Open Box) Quick View

    $2,999.99
    Buy Now
    x

    VPI 299D Integrated Amplifier (Open Box)



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Open Box


    VPI Collectible - Limited To 100


    Includes 90 Day Warranty For Tubes And 3 Year Warranty For Amplifier


    This amp is so good, I bought one myself! -Seth Frank, Owner of SoundStageDirect©


    Original created Harry Weisfeld long time family friend Steve Leung (VAS) collaborated together to bring back one of their favorites, the Scott 299D integrated amp. The integrated has a phono stage, amplifier, and headphone amp built right in. The Limited Edition has been restricted to 100 so grab this VPI collectible while you can.


    Demo Discounts
    $2,999.99
    VPI 299D Integrated Amplifier (Open Box) Buy Now
  • C-DAC 15.3 C-DAC 15.3 Quick View

    $549.99
    Buy Now
    x

    C-DAC 15.3


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Versatility, performance, and value are the hallmarks of the c-dac15.3. By combining a fantastic 3-input dac with a great sounding cd player we've designed a one-box solution that will simplify and dramatically improve your digital music experience. Connect it to a computer, Sonos, Apple TV, Airport Express, any digital streaming device, or simply play a cd and you'll be amazed by the improvement in sound. The c-dac15.3 is easy to operate and partners beautifully with our matching a15.3 integrated amp.


    Music Hall
    $549.99
    Music Hall C-DAC 15.3 Buy Now
  • Cayin A-50T Tube Integrated Amplifier Cayin A-50T Tube Integrated Amplifier Quick View

    $1,600.00
    Buy Now
    x

    Cayin A-50T Tube Integrated Amplifier

    Stereophile Stereophile



    The Cayin A-50T is the best low-price amp I have ever heard, and it rivals some of the best amps in any price range.

    - Harry Weisfeld, owner of VPI Industries


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    A beautifully-crafted, hand-made tube piece manufactured to deliver the sound of the classic Marantz 8B


    The Cayin Audio A-50T uses four EL34s for Class A/B1 P.P amplification. The craftsmanship is absolutely first-rate, featuring point-to-point wiring, and each unit is hand-initialed by a quality-control inspector. The toroid power transformer and EI audio transformer are specially manufactured for the A-50T with low magnetic leakage, wide frequency response and low impedance. Two 12AX7EHs and two 12AU7s are used in the preamplifier. One very cool feature is the ability to switch between ultralinear and triode by remote control.


    This piece was hand-built with extreme attention to detail, including point-to-point wiring. Point-to-point was the way that amps used to be wired back in the 1950s and '60s when cost was not the primary objective. Nowadays, most everything contains circuit boards instead of this point-to-point wiring, which is much more dependable and better performing. The bottom line is that point-to-point wiring sounds better. It's one of the main reasons why these Cayin pieces sound like the classic tube gear from Marantz and McIntosh. Anymore, products that feature point-to-point wiring cost a fortune, or they feature sub-par workmanship. You simply are not going to find craftsmanship like with this Cayin gear for anywhere close to this price.


    There are output taps for 4 or 8 ohms. This allows you to fine-tune the sound that you desire. Switching is simple, and listening to the differences is a lot of fun. There is a removable cage, included at no extra charge. The cage snaps into place simply, so that you can take it on and off with no problem. Keep it on if you're worried about protecting your tubes, or take it off to show what real, heavy-duty, classic tube gear looks like. Turn off the lights and watch 'em glow.


    Cayin
    $1,600.00
    Cayin A-50T Tube Integrated Amp Buy Now
  • VPI 299D Integrated Amplifier VPI 299D Integrated Amplifier Quick View

    $3,999.99
    Buy Now
    x

    VPI 299D Integrated Amplifier



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    VPI Collectible - Limited To 100


    Includes 90 Day Warranty For Tubes And 3 Year Warranty For Amplifier


    This amp is so good, I bought one myself! -Seth Frank, Owner of SoundStageDirect©


    Original created Harry Weisfeld long time family friend Steve Leung (VAS) collaborated together to bring back one of their favorites, the Scott 299D integrated amp. The integrated has a phono stage, amplifier, and headphone amp built right in. The Limited Edition has been restricted to 100 so grab this VPI collectible while you can.


    VPI Amplifier
    $3,999.99
    VPI 299D Integrated Amplifier Buy Now
  • Wyndsor Phono Amp Silver Wyndsor Phono Amp Silver Quick View

    $2,495.99
    Buy Now
    x

    Wyndsor Phono Amp Silver


    Creek Audio has a long history of making fine sounding Phono pre-amplifiers.


    Dating back to the company's first product, the 4040 manufactured in 1982, and more recently the fine sounding OBH range of stand-alone Phono pre-amps, Creek has always applied extra attention to this part of an amplifier's circuitry to obtain the best performance and price. The complexity and accuracy of previous Creek in-built and external Phono pre-amplifiers has always been balanced to suit the total cost of the product and to match the grade of performance versus price.


    Creek's first step towards a no-compromise Phono Pre-amplifier was introduced in 2006 when it produced the Destiny Phono Card. This plug-in circuit was exclusive to the Creek Destiny integrated amplifier and was limited to running from the amplifier's own power supply. Its performance proved exemplary, due to the new circuit design, which utilised very high performance Op-Amps and Balanced SSM2019 integrated amplifiers, with extremely accurate passive components to achieve accurate RIAA EQ. To make it work within the limited confines of an integrated amplifier, it squeezed both left and right channels onto a small 4 layer PCB, using surface mount technology.


    The success of the Destiny plug-in Phono board led to the development of the Wyndsor Phono Pre-amplifier, as a no compromise stand-alone product. It is built into the same stylish case as the Wyndsor LP1 Speed Controller, which is used to power Creek's high-end turntable.


    In order to provide the best performance, left and right channels are built on separate PCB's.


    Each channel has dedicated power supply regulation to completely isolate it from the other channel.


    Unbalanced input and outputs are connected via high grade gold plated RCA sockets.


    Balanced input is possible via dedicated 3 pin mini DIN sockets. Tone arms and some cartridges can be wired specially in balance configuration and soldered to the DIN plugs provided with this product.


    Input selection, cartridge loading and gain are all fully adjustable from the front panel High quality gold contact relays are used to switch all the functions and are driven from a dedicated, stand-alone, high quality linear power supply to isolate them from the analogue pre-amp circuitry.


    The front panel display indicates which functions have been selected. A micro-controller based control interface is accessed through a rotary input selector and push buttons. Several types of cartridge with different parameters can be programmed and the user can name and store them as pre-set numbers in the unit's memory. It is possible to write up to 16 characters on the display for each selection. For each entry the display will show the cartridge name and type, plus a full description of loading, gain and input type. The display can be adjusted in brightness or turned off completely.


    Mute will short the output of the pre-amp, to enable the user to change a record and cut the volume in a convenient way and return to the previous level by pressing the Mute button again.


    The Phono pre-amplifier uses a newly developed Wyndsor power supply unit, with separate supplies for analogue and digital circuits. Turning the pre-amp on and off from the mains is achieved by the switch on the front of the power supply or on the back of the pre-amp.


    This product is not eligible for discount.


    Creek Audio
    $2,495.99
    Wyndsor Phono Amp - Silver Buy Now
  • Marantz PM8005 Integrated Amplifier Marantz PM8005 Integrated Amplifier Quick View

    $1,199.00
    Buy Now
    x

    Marantz PM8005 Integrated Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Integrated Amplifier With Power Amp Direct Input


    Combining fully discrete current feedback circuitry and our exclusive HDAM technology, the Marantz PM8005 integrated stereo amplifier delivers audiophile grade sound quality along with system operational flexibility. Rated at 70 watts per channel into 8 ohms, the PM8005 features a robust power supply along with high current capability to deliver 100 watts per channel into 4 ohms, for compatibility and operational stability with the widest range of loudspeakers.


    The versatile pre-amp section features 6 line level inputs including a phono (MM) input, and the PM8005 also includes pre-amp outputs along with a power amp direct input, which lets you use the unit as a standalone power amplifier for integration into a multi-channel home theater system. For precise sound tailoring, the PM8005 features our triple tone control system, with separate controls for the bass, midrange and treble segments. The elegant remote control features an ergonomic layout for easy operation, and includes the ability to control our companion SA8005 disc player and one of our network players.


    Marantz HDAM Technology


    The PM8005 features our exclusive HDAM (Hyper Dynamic Amplifier Module) technology, which consists of precision discrete selected circuit elements on a compact sub-board, instead of conventional op-amp integrated circuits. Multiple HDAM units are employed, including HDAM-SA3 and HDAM-SA2 versions that provide gain and buffering functions, to deliver dynamic and detailed sound quality. The PM8005 features current feedback technology for ultra low distortion and wideband response, along with superb musicality.


    High Current Power Supply


    The robust power supply features a high current toroidal main power transformer that is rated at 625VA, to easily provide extra power to the amplifier stage in order to handle demanding short term peaks. High current Shottky barrier diodes in the rectification stage are rated at 20 amps, with the ability to handle up to 180 amps peak current, providing sufficient power reserve to handle virtually any loudspeaker load.


    Fully Discrete High Current Output Stages


    The PM8005 is equipped with multiple high speed, high current power output devices that are each rated at 14 amps of current output capability, providing a very high amount of dynamic headroom, along with compatibility with lower impedance loudspeakers. For optimum heat dissipation, the PM8005 is equipped with solid aluminum power amplifier heat sinks, with a combined total radiating area of 326 square inches, eliminating the need for fans. The PM8005 is conservatively rated at 70 watts per channel into 8 ohms, and 100 watts per channel into 4 ohms, for compatibility with the widest range of loudspeakers.


    Solid Chassis Construction


    For the utmost stability and protection from induced vibrations, the PM8005 features a rugged chassis design, which includes a triple layer bottom plate. To eliminate distortion from stray magnetic fields, the high current toroidal main power transformer features double shielding.


    Versatile Pre-Amplifier Functions


    There are 6 line level inputs, to handle a wide range of sources, including a dedicated phono input (MM) that features discrete topology to deliver the utmost fidelity from your favorite vinyl recordings, and all inputs and outputs are gold-plated for optimum signal transfer. The Source Direct function bypasses unnecessary circuit blocks for the straightest path from input to the speaker terminals. Pre-amp outputs let you connect a separate stereo power amplifier for a bi-amp loudspeaker system, or for playback in a separate room. The power amp direct input lets you connect the PM8005 to another component, such as a surround sound processor, for integration within a multi-channel home theater system.


    For precision tonal balancing, we've equipped the PM8005 with our Tri-Tone control system, with separate tone controls for the bass, midrange and treble bands, which lets you fine tune the spectral balance to your preference, and is especially useful with older recordings that suffer from tonal imbalance.


    Audiophile Grade Loudspeaker Terminals


    Equipped with premium audiophile grade loudspeaker terminals that are designed to accept a wide range of speaker cable termination types, the PM8005 also features A/B speaker switching for increased system configuration flexibility.


    System Remote Control


    The elegant, ergonomically designed remote control is equipped with additional functionality, which lets you control a companion Marantz disc player (such as our SA8005) and a Marantz network audio player. Remote control input and output jacks let you directly connect the PM8005 to other Marantz components for easy system control.


    The Marantz PM8005 integrated amplifier is backed by a limited three-year warranty.


    Marantz
    $1,199.00
    Marantz PM8005 Integrated Amp Buy Now
  • Rega Osiris Integrated Amplifier Rega Osiris Integrated Amplifier Quick View

    $9,995.00
    Buy Now
    x

    Rega Osiris Integrated Amplifier


    40th



    2010 2012


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Introducing the Rega Osiris flagship integrated amplifier


    The Osiris is the culmination of Rega engineers 32 years experience in solid-state amplifier development. A no compromise audio amplifier using state of the art surface mount technology and a fully symmetrical circuit.


    Design


    A super high performance, 162 Watts into 8 Ohms (250 Watt 4 Ohms) dual mono amplifier housed in a custom Rega CNC machined aluminium case with high thermal efficiency heat sinks. Designed around minimalist high gain power amplifier and passive pre-amplifier circuit topology, a passive volume control and a single stage of power amplification between the input and the speakers the Osiris offers unrivalled performance and build quality.


    Technology


    The Osiris uses a low distortion high linearity and bandwidth common base voltage amplifier driver stage. This type of symmetrical circuit topology will provide the necessary voltage swings to enable the Osiris to drive any speaker system with the minimum of distortion. Eight Sanken 200 Watt output transistors are used in a triple high current output stage enabling the Osiris to drive even the most awkward of speaker systems with ease.


    The cascoded differential input amplifier uses two low noise LED referenced current generators. The open & closed loop feedback levels and gain bandwidth product components are optimised to give a tight and controlled sound stage, especially at the low frequency end of the audio range. Nichicon audio grade capacitors are used in bypass and decoupling positions.


    Electrolytic capacitors have been bypassed with polyester capacitors where necessary improving on the HF performance. Low inductance film SM power resistors are used in the output stage.


    Power Supply


    The Osiris uses two low noise purpose designed 400VA toroidal transformers using high-grade fully bonded core material.


    The transformers are mounted to the chassis using Rega's innovative mounting technique, which eliminates noise being transferred from the transformer to the case when the transformers are operating under arduous mains (line) conditions with high levels of asymmetric mains (line) distortion.


    These transformers combined with 40,000 Micro Farads of Rega K-Power smoothing capacitors per channel, provide more than enough current to drive the hardest of loads. All the power supplies utilise fast recovery rectifier diodes throughout. (Fast diodes generate less high frequency switching noise therefore giving rise to a cleaner DC).


    The input and low-level driver stages are fed from a regulated symmetrical tracking power supply with a low noise voltage reference, which provides a fully stabilised low noise voltage, ensuring the highest level of sonic purity.


    All the dedicated audio power supplies feed only the audio circuits. The input switching, display & micro controller and protection circuits have their own dedicated supplies, keeping the audio signal path as pure as possible.


    We hope that you enjoy this product as much as we have enjoyed creating it. - Rega


    All these features amalgamate to create the supreme level of performance found in the Osiris and provide a perfect partner for the Rega Isis Cd player.


    Rega Osiris
    $9,995.00
    Rega Osiris Integrated Amp Buy Now
  • Marantz PM6006 Integrated Amplifier Marantz PM6006 Integrated Amplifier Quick View

    $699.00
    Buy Now
    x

    Marantz PM6006 Integrated Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The PM6006 is an upgraded successor of the multi-award-winning PM6005. We've retained the pre-amp and power-amp sections that exclusively feature discrete components - not a single IC in sight of the signal path. The PM6006 is upgraded for peak current at the amplifier stage, which makes it possible to refine the sound for you in much more detail.


    You can connect this superb integrated amplifier directly to a vast range of digital sources and use its superior 24bit/192kHz high current CS4398 DAC to create an unbelievably high level of audio enjoyment with new media. The unit now includes 2 optical and 1 coaxial digital inputs (an additional optical input from the predecessor, PM6005), and the complete digital section is fully shielded by an extra metal housing to ensure that the digital stage has no effect on the analog signal.


    All of the original features-such as five-line audio input including phono, two-pairs of gold-plated speaker connections with the convenience of bi-wiring, and a remote handset-are all still there. The lower impedance shielded Toroidal transformer, as well as customized components and unique Marantz HDAM modules care for powerful, dynamic and detailed original Marantz sound. In short, the new PM6006 is a new star with excellent genes.


    Marantz
    $699.00
    Integrated Amplifier Buy Now
  • Phono Amp PA 1.2 Phono Amp PA 1.2 Quick View

    $175.00
    Buy Now
    x

    Phono Amp PA 1.2

    >
    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The music hall phono amp is the perfect solution for attaching a turntable to a receiver or integrated amplifier. It is a low noise high quality phono pre amp that accepts both moving magnet and moving coil cartridges. The beautifully finished extruded aluminum box wards off the effects of stray magnetic fields and provides a safe quiet environment for the sensitive electronics it houses thus providing you with the best sound possible from your turntable.


    This product is not eligible for discount.


    Music Hall
    $175.00
    Music Hall Phono Amp PA1.2 Buy Now
  • Marantz HD-AMP1 Digital Integrated Amplifier Marantz HD-AMP1 Digital Integrated Amplifier Quick View

    $1,099.00
    Buy Now
    x

    Marantz HD-AMP1 Digital Integrated Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    HD-AMP1 Digital Integrated Amplifier with USB-DAC


    Housed in an elegant compact chassis that occupies just over 1 square foot of desktop or shelf space, the HD-AMP1 digital integrated amplifier features high resolution D/A conversion and compatibility with a wide range of uncompressed high resolution audio formats, including WAV, ALAC, FLAC and AIFF, and is also capable of decoding DSD tracks with compatibility of all 3 DSD sampling frequencies - 2.6/5.2/11.2-MHz (DSD is the audio format of SACD).


    The powerful digital amplifier section features cool-running wide bandwidth and wide dynamic range Class D audiophile amplifier technology, delivering 35 watts per channel into 8 ohms and 70 watts per channel into 4 ohms, providing compatibility with the widest range of speaker types and impedances.


    Featuring 2 USB ports, 1 on the front and 1 on the back, the HD-AMP1 lets you connect your favorite iDevice or USB drive to the front panel USB port, and your PC or Mac to the rear panel USB-B port to stream your high resolution audio tracks, and it features advanced noise isolation to guard against digital noise from degrading the high resolution sound.


    Equipped with Marantz Musical Digital Filtering, our proprietary DSP filter technology, the HD-AMP1 lets you choose from 2 digital filter algorithms so you can precisely tailor the sound to your liking. The reference-class ESS SABRE DAC features 32-bit/384-kHz decoding for the highest resolution and widest dynamic range with today's advanced audiophile hi-res tracks.


    The analog sections feature our exclusive HDAM-SA2 modules, including the analog front end block, the D/A converter block and in the dedicated headphone amplifier block.


    There are 2 optical and 1 coaxial digital inputs, along with 2 analog inputs, so you can connect the widest range of source components.


    The elegant chassis features a solid brushed aluminum front panel along with luxurious woodtone side panels.


    Marantz
    $1,099.00
    Digital Integrated Amplifier Buy Now
  • Wyndsor Phono Amp Black Wyndsor Phono Amp Black Quick View

    $2,495.99
    Buy Now
    x

    Wyndsor Phono Amp Black


    Creek Audio has a long history of making fine sounding Phono pre-amplifiers.


    Dating back to the company's first product, the 4040 manufactured in 1982, and more recently the fine sounding OBH range of stand-alone Phono pre-amps, Creek has always applied extra attention to this part of an amplifier's circuitry to obtain the best performance and price. The complexity and accuracy of previous Creek in-built and external Phono pre-amplifiers has always been balanced to suit the total cost of the product and to match the grade of performance versus price.


    Creek's first step towards a no-compromise Phono Pre-amplifier was introduced in 2006 when it produced the Destiny Phono Card. This plug-in circuit was exclusive to the Creek Destiny integrated amplifier and was limited to running from the amplifier's own power supply. Its performance proved exemplary, due to the new circuit design, which utilised very high performance Op-Amps and Balanced SSM2019 integrated amplifiers, with extremely accurate passive components to achieve accurate RIAA EQ. To make it work within the limited confines of an integrated amplifier, it squeezed both left and right channels onto a small 4 layer PCB, using surface mount technology.


    The success of the Destiny plug-in Phono board led to the development of the Wyndsor Phono Pre-amplifier, as a no compromise stand-alone product. It is built into the same stylish case as the Wyndsor LP1 Speed Controller, which is used to power Creek's high-end turntable.


    In order to provide the best performance, left and right channels are built on separate PCB's.


    Each channel has dedicated power supply regulation to completely isolate it from the other channel.


    Unbalanced input and outputs are connected via high grade gold plated RCA sockets.


    Balanced input is possible via dedicated 3 pin mini DIN sockets. Tone arms and some cartridges can be wired specially in balance configuration and soldered to the DIN plugs provided with this product.


    Input selection, cartridge loading and gain are all fully adjustable from the front panel High quality gold contact relays are used to switch all the functions and are driven from a dedicated, stand-alone, high quality linear power supply to isolate them from the analogue pre-amp circuitry.


    The front panel display indicates which functions have been selected. A micro-controller based control interface is accessed through a rotary input selector and push buttons. Several types of cartridge with different parameters can be programmed and the user can name and store them as pre-set numbers in the unit's memory. It is possible to write up to 16 characters on the display for each selection. For each entry the display will show the cartridge name and type, plus a full description of loading, gain and input type. The display can be adjusted in brightness or turned off completely.


    Mute will short the output of the pre-amp, to enable the user to change a record and cut the volume in a convenient way and return to the previous level by pressing the Mute button again.


    The Phono pre-amplifier uses a newly developed Wyndsor power supply unit, with separate supplies for analogue and digital circuits. Turning the pre-amp on and off from the mains is achieved by the switch on the front of the power supply or on the back of the pre-amp.


    This product is not eligible for discount.


    Creek Audio
    $2,495.99
    Wyndsor Phono Amp - Black Buy Now
  • Marantz PM7005 Integrated Amplifier (With USB-DAC) Marantz PM7005 Integrated Amplifier (With USB-DAC) Quick View

    $999.00
    Buy Now
    x

    Marantz PM7005 Integrated Amplifier (With USB-DAC)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Integrated Amplifier With USB-DAC


    The PM7005 is a fully discrete, current feedback integrated amplifier with USB-DAC functionality. It is simply perfect for audiophiles wanting both excellent music quality and a maximum of flexible operation, which is provided by the highly versatile DAC-mode.


    Marantz
    $999.00
    Marantz PM7005 Integrated Amp Buy Now
  • Complete Analog Turntable System 2 Complete Analog Turntable System 2 Quick View

    $4,410.00
    Buy Now
    x

    Complete Analog Turntable System 2


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Need a stereo system? This kit includes everything you need to get an amazing soundsystem set up!


    System Includes:


    Rega RP3 Cool Grey Turntable + Elys 2 Cartridge - Click here for more info

    Rega Brio-R Integrated Amp - Click here for more info

    (2) Rega RX3 Speakers - Black Ash - Click here for more info

    4TC Kimber Kable - 8ft SBAN Connector


    Complete Analog Systems
    $4,410.00
    Rega Planar 3 Black With Elys 2 | Rega Brio-R | Rega RX3 Speakers | 4TC Kimber Kable Buy Now
  • Audioengine P4 Speakers (Bamboo) Audioengine P4 Speakers (Bamboo) Quick View

    $325.00
    Buy Now
    x

    Audioengine P4 Speakers (Bamboo)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    There's a lot to like about the AP4s. These mighty mites excel at reproducing voices and instruments in space. Bright highs and uncluttered midrange are two of the speaker's greatest strengths.

    - Audio Video Revolution


    A high-performance bookshelf speaker pair with the same great looks and sound as our powered speakers. Experience the signature Audioengine sound and quality but without our built-in amplifiers. Beautiful, small, and affordable, P4 is the perfect choice for your living room, bedroom or office and an ideal surround speaker for use with other Audioengine speakers in your home theater or stereo system.


    Why passive speakers?

    The P4 passive speakers are full-sounding bookshelf speakers in a satellite-sized package. The goal with P4 was to design a small but powerful bookshelf speaker for people that already have surround receivers or amplifiers and are looking for the same Audioengine sound and quality in a passive loudspeaker.


    Already have an amplifier?

    If you already have an power amp or don't want to give up that big surround receiver then the P4 is for you. The P4 has excellent bass response for its size, which is evident when used either as stereo speakers or as satellite surround speakers in your home theater setup. P4 sounds great sitting on stands, on a bookshelf, or mounted on a wall using the integrated threaded inserts which are compatible with most wall or ceiling mount bracket systems.


    Part of the Family

    Audioengine active and passive speaker models share a similar voicing and overall tuning so that you are assured a matched system no matter which of our speakers or Audioengine wireless adapters you decide to add to your system.


    Versatile

    The P4 passive speakers are perfect for digital hybrid amplifiers (Class-D, Class-T, etc.) as well as most stereo receivers, integrated amps, and tube amplifiers. The P4 has a 4 ohm impedance rating but will sound great when connected to almost any receiver or power amp with 4, 6 or 8 ohm speaker output impedance.


    Hear the Difference

    The Audioengine P4 sets a new level of quality and easy setup. Mount a pair on a wall or stand as surround speakers in a home theater system or place them on a shelf or table for a compact stereo setup. Even if you're not an audio enthusiast we guarantee you will still hear a difference!


    Audioengine Speakers
    $325.00
    Audioengine Premium 4 Passive Bookshelf Speakers (Bamboo) Buy Now
  • Audioengine P4 Speakers (Satin Black) Audioengine P4 Speakers (Satin Black) Quick View

    $249.00
    Buy Now
    x

    Audioengine P4 Speakers (Satin Black)



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    There's a lot to like about the AP4s. These mighty mites excel at reproducing voices and instruments in space. Bright highs and uncluttered midrange are two of the speaker's greatest strengths.

    - Audio Video Revolution


    A high-performance bookshelf speaker pair with the same great looks and sound as our powered speakers. Experience the signature Audioengine sound and quality but without our built-in amplifiers. Beautiful, small, and affordable, P4 is the perfect choice for your living room, bedroom or office and an ideal surround speaker for use with other Audioengine speakers in your home theater or stereo system.


    Why passive speakers?

    The P4 passive speakers are full-sounding bookshelf speakers in a satellite-sized package. The goal with P4 was to design a small but powerful bookshelf speaker for people that already have surround receivers or amplifiers and are looking for the same Audioengine sound and quality in a passive loudspeaker.


    Already have an amplifier?

    If you already have an power amp or don't want to give up that big surround receiver then the P4 is for you. The P4 has excellent bass response for its size, which is evident when used either as stereo speakers or as satellite surround speakers in your home theater setup. P4 sounds great sitting on stands, on a bookshelf, or mounted on a wall using the integrated threaded inserts which are compatible with most wall or ceiling mount bracket systems.


    Part of the Family

    Audioengine active and passive speaker models share a similar voicing and overall tuning so that you are assured a matched system no matter which of our speakers or Audioengine wireless adapters you decide to add to your system.


    Versatile

    The P4 passive speakers are perfect for digital hybrid amplifiers (Class-D, Class-T, etc.) as well as most stereo receivers, integrated amps, and tube amplifiers. The P4 has a 4 ohm impedance rating but will sound great when connected to almost any receiver or power amp with 4, 6 or 8 ohm speaker output impedance.


    Hear the Difference

    The Audioengine P4 sets a new level of quality and easy setup. Mount a pair on a wall or stand as surround speakers in a home theater system or place them on a shelf or table for a compact stereo setup. Even if you're not an audio enthusiast we guarantee you will still hear a difference!


    Audioengine Speakers
    $249.00
    Audioengine Premium 4 Passive Bookshelf Speakers (Satin Black) Buy Now
  • Audioengine P4 Speakers (Hi-Gloss White) Audioengine P4 Speakers (Hi-Gloss White) Quick View

    $249.00
    Buy Now
    x

    Audioengine P4 Speakers (Hi-Gloss White)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    There's a lot to like about the AP4s. These mighty mites excel at reproducing voices and instruments in space. Bright highs and uncluttered midrange are two of the speaker's greatest strengths.

    - Audio Video Revolution


    A high-performance bookshelf speaker pair with the same great looks and sound as our powered speakers. Experience the signature Audioengine sound and quality but without our built-in amplifiers. Beautiful, small, and affordable, P4 is the perfect choice for your living room, bedroom or office and an ideal surround speaker for use with other Audioengine speakers in your home theater or stereo system.


    Why passive speakers?

    The P4 passive speakers are full-sounding bookshelf speakers in a satellite-sized package. The goal with P4 was to design a small but powerful bookshelf speaker for people that already have surround receivers or amplifiers and are looking for the same Audioengine sound and quality in a passive loudspeaker.


    Already have an amplifier?

    If you already have an power amp or don't want to give up that big surround receiver then the P4 is for you. The P4 has excellent bass response for its size, which is evident when used either as stereo speakers or as satellite surround speakers in your home theater setup. P4 sounds great sitting on stands, on a bookshelf, or mounted on a wall using the integrated threaded inserts which are compatible with most wall or ceiling mount bracket systems.


    Part of the Family

    Audioengine active and passive speaker models share a similar voicing and overall tuning so that you are assured a matched system no matter which of our speakers or Audioengine wireless adapters you decide to add to your system.


    Versatile

    The P4 passive speakers are perfect for digital hybrid amplifiers (Class-D, Class-T, etc.) as well as most stereo receivers, integrated amps, and tube amplifiers. The P4 has a 4 ohm impedance rating but will sound great when connected to almost any receiver or power amp with 4, 6 or 8 ohm speaker output impedance.


    Hear the Difference

    The Audioengine P4 sets a new level of quality and easy setup. Mount a pair on a wall or stand as surround speakers in a home theater system or place them on a shelf or table for a compact stereo setup. Even if you're not an audio enthusiast we guarantee you will still hear a difference!


    Audioengine Speakers
    $249.00
    Audioengine Premium 4 Passive Bookshelf Speakers (Hi-Gloss White) Buy Now
  • Audioengine HDP6 Speakers 3 COLORS AVAILABLE Audioengine HDP6 Speakers Quick View

    $499.00
    Buy Now
    x

    Audioengine HDP6 Speakers



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    There's a lot to like about the AP4s. These mighty mites excel at reproducing voices and instruments in space. Bright highs and uncluttered midrange are two of the speaker's greatest strengths.

    - Audio Video Revolution


    A high-performance bookshelf speaker pair with the same great looks and sound as our powered speakers. Experience the signature Audioengine sound and quality but without our built-in amplifiers. Beautiful, small, and affordable, P4 is the perfect choice for your living room, bedroom or office and an ideal surround speaker for use with other Audioengine speakers in your home theater or stereo system.


    Why passive speakers?

    The P4 passive speakers are full-sounding bookshelf speakers in a satellite-sized package. The goal with P4 was to design a small but powerful bookshelf speaker for people that already have surround receivers or amplifiers and are looking for the same Audioengine sound and quality in a passive loudspeaker.


    Already have an amplifier?

    If you already have an power amp or don't want to give up that big surround receiver then the P4 is for you. The P4 has excellent bass response for its size, which is evident when used either as stereo speakers or as satellite surround speakers in your home theater setup. P4 sounds great sitting on stands, on a bookshelf, or mounted on a wall using the integrated threaded inserts which are compatible with most wall or ceiling mount bracket systems.


    Part of the Family

    Audioengine active and passive speaker models share a similar voicing and overall tuning so that you are assured a matched system no matter which of our speakers or Audioengine wireless adapters you decide to add to your system.


    Versatile

    The P4 passive speakers are perfect for digital hybrid amplifiers (Class-D, Class-T, etc.) as well as most stereo receivers, integrated amps, and tube amplifiers. The P4 has a 4 ohm impedance rating but will sound great when connected to almost any receiver or power amp with 4, 6 or 8 ohm speaker output impedance.


    Hear the Difference

    The Audioengine P4 sets a new level of quality and easy setup. Mount a pair on a wall or stand as surround speakers in a home theater system or place them on a shelf or table for a compact stereo setup. Even if you're not an audio enthusiast we guarantee you will still hear a difference!


    Audioengine Speakers
    $499.00
    Passive Bookshelf Speakers (Pair) - 3 Colors Available
    Buy Now
  • Rega Elex-R Amplifier Rega Elex-R Amplifier Quick View

    $1,695.00
    Buy Now
    x

    Rega Elex-R Amplifier

    40th



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The Elex-R is a sublime blend of the Brio-R design with the power circuits and advanced phono stage of the Elicit-R. Rega's engineers have achieved the perfect balance of power, control and dynamics, delivering a performance that always puts the music first.


    You will find plenty of connectivity options allowing complete flexibility and integration within the rest of the Rega range.


    Design Innovation


    The Elex-R is built to the highest standard and designed to deliver the best possible audio performance whilst remaining simple to use and easy to setup.The Elex-R is built into the full width Rega case with increased heat dissipation, which along with a larger transformer enables the Elex-R to deliver 90 Watts per channel into 6 and 72.5 Watts per channel into a design centre rating of 8.


    Our time, effort & money have been spent on developing the circuit and construction utilizing the highest specification of components throughout. As part of the design we have included useful features like pre-amplifier output, to enable the new Elex-R amplifier to be used in a wide combination of systems and have avoided superfluous gadgets such as tone controls or a headphone socket as they can obstruct the signal path and degrade the produced sound quality.


    The Elex-R has been built to Rega's extremely high standards of reliability and quality to ensure many years of musical enjoyment. The primary function of an amplifier is to boost and equalize the low level signal generated by a phono cartridge, DAC and CD player or other source component to a level that can drive the loudspeakers. It is vital that the amplifier achieves this whilst minimising distortion, as this would directly affect the music. The distortion level is typically 0.007%; just under the clipping of the output.


    The volume control and pre-amplifier used in the Elex-R is designed to overcome the problems associated with the standard arrangement. This design uses a custom chip along with peripheral support IC's like a microcontroller and a custom made rotary volume control.


    The Elex-R uses a combined feedback and passive volume control, where the feedback and input levels are varied to set the required volume level. The level and tracking between the two channels is set by the close tolerance parts in the pre-amplifier circuit and less by the actual potentiometer itself, thus keeping the mismatch of channels due to volume control tracking irregularities to a minimum.As well as keeping tracking irregularities to a minimum, this method also reduces noise and input overload as the control will only 'use' the required gain to amplify the signal.This form of volume control is normally only found in professional broadcast environments where accurate low noise control of levels is required.


    Power Amplifier Technology


    The output amplifier used in the Elex-R, Elicit-R and Brio-R was born after extensive research by our engineers to develop a low source impedance emitter follower Class-A driver stage. This is based around a complementary pair of 150w Sanken Darlington output transistors. The technical and sonic improvement gained by the use of low impedance drivers is well known, however, it can feature high standing currents in the driver stage when using standard transistor configurations. By combining the low impedance driver with the Sanken Darlington transistors (with their imbedded thermal bias network running at a lower standing current) this combination forms a complementary emitter follower emulating Class-A conditions with good thermal stability with lower standing.


    Rega Integrated Amps
    $1,695.00
    Rega Elex-R Amplifier Buy Now
  • 1
  • 2
Go to top