Vinyl. Our way of life since 2004 (877) 929-8729

VPI Dealer Authorized & Certified
Site Search
Menu Free shipping on domestic orders over $49.99! - We ship worldwide!
LP20 - 20% Off Vinyl
Home > Products for: '

Amp

'
Results per page:
  • Cayin A-50T Tube Integrated Amplifier Cayin A-50T Tube Integrated Amplifier Quick View

    $1,600.00
    Buy Now
    x

    Cayin A-50T Tube Integrated Amplifier

    Stereophile Stereophile



    The Cayin A-50T is the best low-price amp I have ever heard, and it rivals some of the best amps in any price range.

    - Harry Weisfeld, owner of VPI Industries


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    A beautifully-crafted, hand-made tube piece manufactured to deliver the sound of the classic Marantz 8B


    The Cayin Audio A-50T uses four EL34s for Class A/B1 P.P amplification. The craftsmanship is absolutely first-rate, featuring point-to-point wiring, and each unit is hand-initialed by a quality-control inspector. The toroid power transformer and EI audio transformer are specially manufactured for the A-50T with low magnetic leakage, wide frequency response and low impedance. Two 12AX7EHs and two 12AU7s are used in the preamplifier. One very cool feature is the ability to switch between ultralinear and triode by remote control.


    This piece was hand-built with extreme attention to detail, including point-to-point wiring. Point-to-point was the way that amps used to be wired back in the 1950s and '60s when cost was not the primary objective. Nowadays, most everything contains circuit boards instead of this point-to-point wiring, which is much more dependable and better performing. The bottom line is that point-to-point wiring sounds better. It's one of the main reasons why these Cayin pieces sound like the classic tube gear from Marantz and McIntosh. Anymore, products that feature point-to-point wiring cost a fortune, or they feature sub-par workmanship. You simply are not going to find craftsmanship like with this Cayin gear for anywhere close to this price.


    There are output taps for 4 or 8 ohms. This allows you to fine-tune the sound that you desire. Switching is simple, and listening to the differences is a lot of fun. There is a removable cage, included at no extra charge. The cage snaps into place simply, so that you can take it on and off with no problem. Keep it on if you're worried about protecting your tubes, or take it off to show what real, heavy-duty, classic tube gear looks like. Turn off the lights and watch 'em glow.


    Cayin
    $1,600.00
    Cayin A-50T Tube Integrated Amp Buy Now
  • Pacer Pacer Quick View

    $21.99
    Buy Now
    x

    Pacer

    The one and only full length from Kim Deal's post-Pixes and Breeders group, released in 1995. Though The Amps were originally intended to be a solo project for Deal, they quickly developed into a full fledged band, recording tunes that were slated to be part of the 3rd, never recorded, Breeders' album. Sloppy, raucous, and life-affirming rock and roll that owes more than a little to their fellow Dayton-ites Guided By Voices, Pacer is as good or better as any of the Breeders' releases. Another classic '90s reissue on 180g vinyl from Plain Recordings.
    1. Pacer

    2. Tipp City

    3. I Am Decided

    4. Mom's Drunk

    5. Bragging Party

    6. Hoverin'

    7. First Revival

    8. Full on Idle

    9. Breaking the Split Screen Barrier
    10. Empty Glasses

    11. She's a Girl

    12. Dedicated
    The Amps
    $21.99
    180 Gram Audiophile Virgin Vinyl LP - Sealed Buy Now
  • SCC Conductor - Vampire Locking Connector 2 LENGTHS AVAILABLE SCC Conductor - Vampire Locking Connector Quick View

    $395.00
    Buy Now
    x

    SCC Conductor - Vampire Locking Connector

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Shielded Solid Silver Conductor Interconnect Cables


    Bob's Devices continues to break the price barrier by offering top quality audiophile cables at 1/3 the price of competitive products. All our cables are hand crafted, fully balanced, individually tested and terminated with top of the line Cardas Audio SRCA and the new Cardas XLR connectors. For those of you who prefer RCA locking connectors, we offer the Vampire LRCA-8 Locking connectors with spring loaded center pin.. The interior connections are resistance soldered and dampened in pure Teflon wrap.


    The silver and silver clad interconnects are terminated using WBT silver solder. As always, we back our cables with our 100% customer satisfaction guarantee. All Bob's interconnects feature a balanced type of architecture with internal conductors carrying the + and - signal with an additional braided conductive shield that is connected on one end only. This provides shielding effectively rejecting RF and EM interference without creating ground loops (say goodbye to hum).


    Three lines of cables are offered: cables with Solid Silver conductors, cables with Silver-clad copper conductors and our limited production vintage cables constructed with copper conductors.


    This Solid Silver custom terminated interconnect is Bob's top-of-the-line cable. It features a pair of pure silver 22 awg conductors and triple-shielding consisting of a silver plated OFC braided shield coupled to an Aluminum/Mylar shield and a Teflon PTFE shield. Covering the shield is a braided nylon sheath encased in a clear PVC outer jacket. Internally, this cable has 5 polyethylene air tubes separating and isolating the conductors.


    Bob's silver cable is custom terminated in our lab with your choice of the best Cardas SRCA or the new Cardas XLR connectors.


    Bob's custom terminated silver-clad crystal copper interconnects feature a balanced design architecture using Polyethylene insulation and a pair of silver plated copper conductors (SP-OFC) that are insulated with Foamed Polyethylene, and wrapped together by a double screen shielding consisting of a tinned OFC braided shield coupled to an Aluminum/Mylar shield. This wire architecture is modeled from the wire Koetsu uses to wrap their Platinum magnets. We believe the results will thrill you with exhilarating highs, tight bass, and romantic mids - very much the Koetsu paradigm. These interconnects not only shine with tube equipment but do especially well with a solid-state phono stage and preamp.


    The silver clad copper wire uses the UP-OCCP (Ultra Pure - Ohno Continuous Casting Process) which is a continuous-casting method that was developed by Professor Ohno of the Chiba Institute in Japan. This wire is free from impurities (up to 99.99998% pure copper and silver). Accordingly, it is able to transmit electrical signals faster, and with less distortion than ordinary OFC and silver wires.


    Bob silver-clad copper interconnects are custom terminated in our lab using the very best Cardas SRCA or the new Cardas XLR connectors. Vampire LC-8 locking connectors are also available.


    Bob's custom terminated silver-clad crystal copper interconnects feature a balanced design architecture using Polyethylene insulation and a pair of silver plated copper conductors (SP-OFC) that are insulated with Foamed Polyethylene, and wrapped together by a double screen shielding consisting of a tinned OFC braided shield coupled to an Aluminum/Mylar shield. This wire architecture is modeled from the wire Koetsu uses to wrap their Platinum magnets. We believe the results will thrill you with exhilarating highs, tight bass, and romantic mids - very much the Koetsu paradigm. These interconnects not only shine with tube equipment but do especially well with a solid-state phono stage and preamp.


    The silver clad copper wire uses the UP-OCCP (Ultra Pure - Ohno Continuous Casting Process) which is a continuous-casting method that was developed by Professor Ohno of the Chiba Institute in Japan. This wire is free from impurities (up to 99.99998% pure copper and silver). Accordingly, it is able to transmit electrical signals faster, and with less distortion than ordinary OFC and silver wires.


    Bob silver-clad copper interconnects are custom terminated in our lab using the very best Cardas SRCA or the new Cardas XLR connectors. Vampire LC-8 locking connectors are also available.


    This item is not eligible for discount.


    Bob's Devices
    $395.00
    SCC Conductor - Vampire Locking Connector (2 Lengths Available)
    Buy Now
  • Wyndsor Phono Amp Black Wyndsor Phono Amp Black Quick View

    $2,495.99
    Buy Now
    x

    Wyndsor Phono Amp Black


    Creek Audio has a long history of making fine sounding Phono pre-amplifiers.


    Dating back to the company's first product, the 4040 manufactured in 1982, and more recently the fine sounding OBH range of stand-alone Phono pre-amps, Creek has always applied extra attention to this part of an amplifier's circuitry to obtain the best performance and price. The complexity and accuracy of previous Creek in-built and external Phono pre-amplifiers has always been balanced to suit the total cost of the product and to match the grade of performance versus price.


    Creek's first step towards a no-compromise Phono Pre-amplifier was introduced in 2006 when it produced the Destiny Phono Card. This plug-in circuit was exclusive to the Creek Destiny integrated amplifier and was limited to running from the amplifier's own power supply. Its performance proved exemplary, due to the new circuit design, which utilised very high performance Op-Amps and Balanced SSM2019 integrated amplifiers, with extremely accurate passive components to achieve accurate RIAA EQ. To make it work within the limited confines of an integrated amplifier, it squeezed both left and right channels onto a small 4 layer PCB, using surface mount technology.


    The success of the Destiny plug-in Phono board led to the development of the Wyndsor Phono Pre-amplifier, as a no compromise stand-alone product. It is built into the same stylish case as the Wyndsor LP1 Speed Controller, which is used to power Creek's high-end turntable.


    In order to provide the best performance, left and right channels are built on separate PCB's.


    Each channel has dedicated power supply regulation to completely isolate it from the other channel.


    Unbalanced input and outputs are connected via high grade gold plated RCA sockets.


    Balanced input is possible via dedicated 3 pin mini DIN sockets. Tone arms and some cartridges can be wired specially in balance configuration and soldered to the DIN plugs provided with this product.


    Input selection, cartridge loading and gain are all fully adjustable from the front panel High quality gold contact relays are used to switch all the functions and are driven from a dedicated, stand-alone, high quality linear power supply to isolate them from the analogue pre-amp circuitry.


    The front panel display indicates which functions have been selected. A micro-controller based control interface is accessed through a rotary input selector and push buttons. Several types of cartridge with different parameters can be programmed and the user can name and store them as pre-set numbers in the unit's memory. It is possible to write up to 16 characters on the display for each selection. For each entry the display will show the cartridge name and type, plus a full description of loading, gain and input type. The display can be adjusted in brightness or turned off completely.


    Mute will short the output of the pre-amp, to enable the user to change a record and cut the volume in a convenient way and return to the previous level by pressing the Mute button again.


    The Phono pre-amplifier uses a newly developed Wyndsor power supply unit, with separate supplies for analogue and digital circuits. Turning the pre-amp on and off from the mains is achieved by the switch on the front of the power supply or on the back of the pre-amp.


    This product is not eligible for discount.


    Creek Audio
    $2,495.99
    Wyndsor Phono Amp - Black Buy Now
  • Integrated Amplifier A15.3 Integrated Amplifier A15.3 Quick View

    $549.99
    Buy Now
    x

    Integrated Amplifier A15.3


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The a15.3 presents a smart alternative to surround sound receivers and all in one systems. It's the perfect choice for someone looking to assemble their first hi end audio system. Partner it with the matching c-dac15.3 dac cd player and one of our turntables for a great sounding system. Connecting a turntable couldn't be easier with the built-in moving magnet phono preamp. The amp delivers an impressive 50 watts/channel, which is plenty of power to drive the majority of loudspeakers on the market.


    Music Hall
    $549.99
    Music Hall A15.3 Integrated Amp Buy Now
  • Marantz HD-AMP1 Digital Integrated Amplifier Marantz HD-AMP1 Digital Integrated Amplifier Quick View

    $1,099.00
    Buy Now
    x

    Marantz HD-AMP1 Digital Integrated Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    HD-AMP1 Digital Integrated Amplifier with USB-DAC


    Housed in an elegant compact chassis that occupies just over 1 square foot of desktop or shelf space, the HD-AMP1 digital integrated amplifier features high resolution D/A conversion and compatibility with a wide range of uncompressed high resolution audio formats, including WAV, ALAC, FLAC and AIFF, and is also capable of decoding DSD tracks with compatibility of all 3 DSD sampling frequencies - 2.6/5.2/11.2-MHz (DSD is the audio format of SACD).


    The powerful digital amplifier section features cool-running wide bandwidth and wide dynamic range Class D audiophile amplifier technology, delivering 35 watts per channel into 8 ohms and 70 watts per channel into 4 ohms, providing compatibility with the widest range of speaker types and impedances.


    Featuring 2 USB ports, 1 on the front and 1 on the back, the HD-AMP1 lets you connect your favorite iDevice or USB drive to the front panel USB port, and your PC or Mac to the rear panel USB-B port to stream your high resolution audio tracks, and it features advanced noise isolation to guard against digital noise from degrading the high resolution sound.


    Equipped with Marantz Musical Digital Filtering, our proprietary DSP filter technology, the HD-AMP1 lets you choose from 2 digital filter algorithms so you can precisely tailor the sound to your liking. The reference-class ESS SABRE DAC features 32-bit/384-kHz decoding for the highest resolution and widest dynamic range with today's advanced audiophile hi-res tracks.


    The analog sections feature our exclusive HDAM-SA2 modules, including the analog front end block, the D/A converter block and in the dedicated headphone amplifier block.


    There are 2 optical and 1 coaxial digital inputs, along with 2 analog inputs, so you can connect the widest range of source components.


    The elegant chassis features a solid brushed aluminum front panel along with luxurious woodtone side panels.


    Marantz
    $1,099.00
    Digital Integrated Amplifier Buy Now
  • PS Audio Sprout (On Sale) PS Audio Sprout (On Sale) On Sale Quick View

    $799.00 $499.00 Save $300.00 (38%)

    Buy Now
    x

    PS Audio Sprout (On Sale)





    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    A Complete Amp For The Modern Home


    Sprout is the culmination of PS Audio's 42 years' experience building concert quality audio products. We hand selected the best parts of that rich history and put it into a single, simple, easy-to-use personal music system. It's everything you need. Nothing you don't. Just add speakers or headphones, and music-so close to live-will fill your whole home. It's nothing short of magical. Sprout is the link between your music and your speakers. Sprout is the size of a big novel, yet it will fill your living room, bedroom or any room with enormous, live sound. Sprout is designed down to the very atom. Constructed of stainless steel, extruded aluminum, and walnut, this is not audio equipment. It's audio furniture.



    Demo Discounts
    $799.00 $499.00 Save $300.00 (38%)
    PS Audio Sprout Amp
    Buy Now
  • Audioengine D3 DAC Audioengine D3 DAC Quick View

    $99.00
    Buy Now
    x

    Audioengine D3 DAC


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Audioengine D3 Premium 24-bit DAC


    - Connect D3 to a USB port on your Mac or PC and send high-quality music to your headphones or any audio system.

    - D3 includes a USB DAC and headphone amplifier for incredible audio performance in a portable design.

    - Audioengine D3 is the perfect intro to computer audio!


    The Audioengine D3 Premium 24-bit DAC (digital-to-analog converter) allows you to bypass your computer's headphone output and send music directly through a USB port for noticeably improved fidelity and a higher output. The D3 is a powerful yet portable converter with performance and features usually found in more expensive DACs and is the perfect interface between your computer and headphones or any music system.


    Easy setup

    Setup is easy and no special software is needed, making D3 a true plug-and-play solution. The D3 plugs directly into a USB port on your computer so no external power supply or cables are needed. The output of the D3 connects to headphones, Audioengine powered speakers, or any audio system. The D3 also has a sample rate indicator that shows sample rates above 48K so you'll know you're getting the most out of your HD music.


    Versatile

    The quality of most computer headphone outputs isn't generally very inspiring, so the D3 provides a better option by streaming audio from your computer's USB port and directly connecting to your music system or headphones. The D3 DAC is the perfect way to get great-sounding music not only from your computer to headphones but also from your computer to any music system.


    Designed for the headphone enthusiast

    D3 will process digital audio at any bit depth up to 24 bits and any native sample rate to 96KHz. With it's high signal-to-noise ratio and low distortion, the D3 delivers sound quality generally heard only in more expensive DACs. The high-performance headphone amplifier was designed for a wide range of headphones and will satisfy even the most demanding headphone enthusiast with its high output and revealing sound. The D3's asynchronous data transfer carefully controls USB streaming audio from any computer which greatly improves audio performance.


    See and hear the difference

    The aluminum case of the D3 reflects traditional Audioengine design and the high-quality components and audio fidelity are typical of Audioengine's commitment to great sound at affordable prices. The Audioengine D3 continues to close the gap between your computer music and home hi-fi and even if you're not an audio enthusiast we guarantee your music will sound better!


    Audioengine
    $99.00
    Audioengine D3 Premium Portable 24 bit USB Digital-to-Analog Converter (DAC) + Headphone Amp Buy Now
  • Phono Amp PA 1.2 Phono Amp PA 1.2 Quick View

    $175.00
    Buy Now
    x

    Phono Amp PA 1.2

    >
    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The music hall phono amp is the perfect solution for attaching a turntable to a receiver or integrated amplifier. It is a low noise high quality phono pre amp that accepts both moving magnet and moving coil cartridges. The beautifully finished extruded aluminum box wards off the effects of stray magnetic fields and provides a safe quiet environment for the sensitive electronics it houses thus providing you with the best sound possible from your turntable.


    This product is not eligible for discount.


    Music Hall
    $175.00
    Music Hall Phono Amp PA1.2 Buy Now
  • Headphone Amp PH25.2 Headphone Amp PH25.2 Quick View

    $399.99
    Buy Now
    x

    Headphone Amp PH25.2


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Marrying a gorgeous sounding tube pre-amp with solid-state amplification has been a technique for achieving unequaled sound quality in hi-end component audio since the advent of the transistor. While kicking around ideas for our new headphone amp we thought, why not try this same technique in a single component? We built one up and were blown away by the increased detail, clarity, and presence the design offered. The tube hybrid headphone amp was born. Hand assembled using the highest quality parts available the music hall ph25.2 will have you singing along with your favorite artists.


    This product is not eligible for discount.


    Music Hall
    $399.99
    Music Hall Headphone Amp PH25.2 Buy Now
  • Wyndsor Phono Amp Silver Wyndsor Phono Amp Silver Quick View

    $2,495.99
    Buy Now
    x

    Wyndsor Phono Amp Silver


    Creek Audio has a long history of making fine sounding Phono pre-amplifiers.


    Dating back to the company's first product, the 4040 manufactured in 1982, and more recently the fine sounding OBH range of stand-alone Phono pre-amps, Creek has always applied extra attention to this part of an amplifier's circuitry to obtain the best performance and price. The complexity and accuracy of previous Creek in-built and external Phono pre-amplifiers has always been balanced to suit the total cost of the product and to match the grade of performance versus price.


    Creek's first step towards a no-compromise Phono Pre-amplifier was introduced in 2006 when it produced the Destiny Phono Card. This plug-in circuit was exclusive to the Creek Destiny integrated amplifier and was limited to running from the amplifier's own power supply. Its performance proved exemplary, due to the new circuit design, which utilised very high performance Op-Amps and Balanced SSM2019 integrated amplifiers, with extremely accurate passive components to achieve accurate RIAA EQ. To make it work within the limited confines of an integrated amplifier, it squeezed both left and right channels onto a small 4 layer PCB, using surface mount technology.


    The success of the Destiny plug-in Phono board led to the development of the Wyndsor Phono Pre-amplifier, as a no compromise stand-alone product. It is built into the same stylish case as the Wyndsor LP1 Speed Controller, which is used to power Creek's high-end turntable.


    In order to provide the best performance, left and right channels are built on separate PCB's.


    Each channel has dedicated power supply regulation to completely isolate it from the other channel.


    Unbalanced input and outputs are connected via high grade gold plated RCA sockets.


    Balanced input is possible via dedicated 3 pin mini DIN sockets. Tone arms and some cartridges can be wired specially in balance configuration and soldered to the DIN plugs provided with this product.


    Input selection, cartridge loading and gain are all fully adjustable from the front panel High quality gold contact relays are used to switch all the functions and are driven from a dedicated, stand-alone, high quality linear power supply to isolate them from the analogue pre-amp circuitry.


    The front panel display indicates which functions have been selected. A micro-controller based control interface is accessed through a rotary input selector and push buttons. Several types of cartridge with different parameters can be programmed and the user can name and store them as pre-set numbers in the unit's memory. It is possible to write up to 16 characters on the display for each selection. For each entry the display will show the cartridge name and type, plus a full description of loading, gain and input type. The display can be adjusted in brightness or turned off completely.


    Mute will short the output of the pre-amp, to enable the user to change a record and cut the volume in a convenient way and return to the previous level by pressing the Mute button again.


    The Phono pre-amplifier uses a newly developed Wyndsor power supply unit, with separate supplies for analogue and digital circuits. Turning the pre-amp on and off from the mains is achieved by the switch on the front of the power supply or on the back of the pre-amp.


    This product is not eligible for discount.


    Creek Audio
    $2,495.99
    Wyndsor Phono Amp - Silver Buy Now
  • Inspiration Information: Amp Fiddler (Awaiting Repress) Inspiration Information: Amp Fiddler (Awaiting Repress) Quick View

    $21.99
    Buy Now
    x

    Inspiration Information: Amp Fiddler (Awaiting Repress)

    This autumn brings the launch of a priority new series on Strut as the label takes a break from its schedule of funky compilations and moves into new studio recordings for the first time. Entitled Inspiration Information, the series brings together current artists and producers with their musical heroes for a mouth-watering one-off collaboration. The series kicks off with Detroit soul maverick Amp Fiddler in a head-to-head with reggae legends, Sly Dunbar & Robbie Shakespeare. Our manager told us about Amp, says Robbie. We heard that he used to be part of the Funkadelic set-up. We were always right into the Parlia-Funkadelic sound, recalls Sly. Their brand of funk was so different. I loved it from their first record. Me and Bootsy Collins are good friends he played on one of our albums and I always loved Motown too, ever since I was a kid. That all brought us closer to Amp and the musical groove just stuck. We hit it off from the first session.
    1. Crazy Day
    2. I Feel On The Wagon
    3. Drama Inside
    4. Black House (Paint The White House Black)
    5. U
    6. Serious
    7. I Believe In You
    8. Lonely
    9. Vibrationship
    10. Changes
    11. This World
    Sly & Robbie
    $21.99
    Vinyl LP - 2 LPs Sealed AWAITING REPRESS Buy Now
  • Integrated Amplifier A70.2 Integrated Amplifier A70.2 Quick View

    $1,499.99
    Buy Now
    x

    Integrated Amplifier A70.2


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The a70.2, our most powerful integrated amplifier to date, impresses with its brawn yet wows with its delicacy. The engulfing soundstage presented and engaging sonic character are the direct result of our brilliant circuit design and careful attention placed on the critical elements for accurate and musical sound reproduction while eliminating all unnecessary bits. Geared primarily toward the music lover with a two channel audio system, we have included a direct av input (home theater bypass), for those that want to use the amplifier section of the a70.2 to power the front channels in a home theater set-up. Vinyl fans will rejoice over the exceptional moving-magnet phono preamp. Constructed using the finest parts and hand assembled, the a70.2 is the ideal component around which to build a stunning audio system.


    This product is not eligible for discount.


    Music Hall
    $1,499.99
    Music Hall A70.2 Integrated Amp Buy Now
  • Audioengine D1 DAC Audioengine D1 DAC Quick View

    $169.00
    Buy Now
    x

    Audioengine D1 DAC


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Premium 24-bit DAC


    Audioengine D1 Premium 24-bit DAC (digital-to-analog converter) allows you to bypass your computer's soundcard or headphone output and send audio through USB or optical. D1 is the perfect digital interface between your computer and music system and will improve the sound of ALL your music.


    Versatile

    The D1 accepts inputs from both USB and optical and has outputs for any audio system or headphones. The D1 DAC is the perfect way to get great-sounding music not only from your computer but also from your TV, Apple TV, DVD/BluRay player or CD player. And since it's powered by USB, D1 is also a high-quality portable computer headphone amplifier.


    Designed for the Computer Audiophile

    D1 will process digital audio at any bit depth up to 24 bits and any sample rate to 192KHz. With it's high signal-to-noise ratio and low distortion the D1 delivers sound quality generally heard only in more expensive DACs. The high-performance headphone output was designed for a wide range of headphones and will satisfy even the most demanding headphone enthusiasts.


    Easy Setup

    Setup is easy and no special software is needed, making D1 a true plug-and-play solution. The D1 outputs connect to any audio system or powered speakers, such as the Audioengine A5+ or A2. Power for the D1 is provided via the USB bus so there is no external power supply to connect.


    See and Hear the Difference

    Audioengine designers, with their attention to audio quality as well as visual aesthetics, have created a feast for both the eyes and ears. The rounded anodized aluminum case of the D1 reflects traditional Audioengine design and the audio fidelity is typical of Audioengine's commitment to great sound at an affordable price. The Audioengine D1 continues to close the gap between your computer music and home hi-fi and even if you're not an audio enthusiast we guarantee your music will sound better!


    Audioengine
    $169.00
    Audioengine D1 24 bit Digital-to-Analog Converter (DAC) + Headphone Amp Buy Now
  • Birth Control (On Sale) Birth Control (On Sale) On Sale Quick View

    $22.99 $18.16 Save $4.83 (21%)

    Buy Now
    x

    Birth Control (On Sale)

    Three albums into their career, New Jersey's Fight Amp show no desire to outgrow their tough but taut noise rock tendencies, but that hardly means they are treading water in a sea of retarded sexuality either. Released in 2012, Birth Control introduces new drummer Dan Smith (who, conveniently, also designed its cover art) into vocalist/guitarist Mike McGinnis and vocalist/bassist Jon DeHart's private little fight club, and the tenacious, unforgiving music they produce in unison makes it just as easy to imagine the trio members sparring in a seedy old boxing gym as bashing away at their instruments in a dingy rehearsal space. And while the boys last just eight rounds (songs) on Birth Control, most of 'em extend well beyond the regulation three minutes and boast a series of curiously style-departing codas -- e.g., the menacing echoes of "White Pickett," the piano on "Should've Worn Black" -- that enhance the illusion of a championship bout going the distance. By and large, most tracks ("Fly Trap," "Creepy Kicks," "I Am the Corpse") focus on punishing instrumental interplay, guitars verging on the atonal, while McGinnis incessantly barks against the fading of the light, escalating to outright screams when the rage becomes more than he can contain. Not until the late-album instrumental left turn "Goner" does the band forgo its customary energy for a more measured, though no less intense, approach where bass grooves call the shots as guitars and drums deliver the body blows. All of which raises the question: are you man or woman enough to go toe to toe with Fight Amp? Then get in the ring!

    1. Fly Trap

    2. White Pickett

    3. Creepy Kicks

    4. Should've Worn Black

    5. Shallow Grave

    6. Goner

    7. I'm Out

    8. I Am the Corpse

    Fight Amp
    $22.99 $18.16 Save $4.83 (21%)
    Vinyl LP - Sealed Buy Now
  • Hungry For Nothing (On Sale) Hungry For Nothing (On Sale) On Sale Quick View

    $19.99 $15.79 Save $4.20 (21%)

    Buy Now
    x

    Hungry For Nothing (On Sale)

    1. Dead Is Dead
    2. Late Bloomer
    3. What A Drag
    4. Samhain
    5. Lungs
    6. Bound And Hagged
    7. Get High And Fuck
    8. Dumb Luck
    Fight Amp
    $19.99 $15.79 Save $4.20 (21%)
    180 Gram Audiophile Virgin Vinyl LP - Sealed Buy Now
  • PS Audio Stellar S300 Stereo Amplifier 2 COLORS AVAILABLE PS Audio Stellar S300 Stereo Amplifier Quick View

    $1,499.00
    Buy Now
    x

    PS Audio Stellar S300 Stereo Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Breathe new life into your loudspeakers with the Stellar S300, one of the most extraordinary under $5,000 stereo power amplifiers ever crafted. The S300 combines the slam, linearity, and toe-tapping pacing of a Class D output stage with the warmth, grace, and rich inner detail of Stellar's Class A Analog Cell. The results are nothing short of ground breaking. Liberate a wealth of untapped energy trapped in your media library. Plumb music's subterranean depths and finally hear the bass your speakers were capable of. Revel in rich layers of fine, full detail. Marvel at the deep, extraordinary, wall-to-wall soundstage. Effortless. Lush. Stellar.


    The problems faced when crafting a new power amplifier are many-delivering sufficient power, control, frequency extension, and dynamics while maintaining a perfectly layered soundstage under the most complex musical passages.


    All amplifiers sound different. What determines sound quality are the components and topologies of the amp's input voltage stage and output current stage. Each section should complement the other. Between them, the amp develops its sound.


    Stellar's design imperatives-affordable pricing, and uncompromised sonics-were major challenges solved by the invention of a unique new circuit christened the Analog Cell.


    Stellar engineer Darren Myers had planned from the outset to take advantage of Class D's high current, low distortion, ruler flat linearity for the output stage-knowing full well it is the input stage that determines sonic character. This critical interface between preamplifier and power amplifier is where Stellar's magic would be unveiled; where Myers could lavish upon the music the sweet, tube-like quality of Class A biased MOSFETs. His challenge was to synergistically marry both input and output topologies, for which he invented Stellar's Analog Cell.


    The Analog Cell is the heart of the S300's musicality, where richly overlayed layers of music's inner details are preserved even in the most complex orchestral crescendos. The Analog Cell is a proprietary, fully differential, zero feedback, discrete, Class A MOSFET circuit, hand-tuned to capture the smallest micro dynamics without sacrificing the loudest macro dynamics music has to offer.


    If you're able to invest in a cost-no-object performance stereo amplifier, you want the BHK Signature 250. For everyone else who refuses to compromise music's promise, Stellar represents breakthrough performance at stellar pricing.



    PS Audio
    $1,499.00
    Power Amplifier - Black or Silver
    Buy Now
  • Manley Headphone Amplifier (Pre-Order) 3 COLORS AVAILABLE Manley Headphone Amplifier (Pre-Order) Quick View

    $2,950.00
    Buy Now
    x

    Manley Headphone Amplifier (Pre-Order)


    Manley Laboratories have been designing and manufacturing professional and hi-fidelity audio equipment for the last twenty five years. Headphone listening has become more and more popular in recent years. To meet this new demand Manley have combined its professional and domestic engineering skills to develop a new and exciting groundbreaking product, The Manley Headphone Amplifier.


    Headphone listening is not new to us, we have developed headphone mixers for the professional industry and our Neo-Classic 300B preamplifier was designed with the serious headphone listener in-mind, which now has quite a cult following. The new Manley Headphone Amplifier addresses absolutely every possible feature the headphone user could desire.


    Feature Rich


    This feature rich product has no less than twelve independent controls designed for maximum performance and maximum control. We design and manufacture our own output transformers and this is where this product excels. The Manley Headphone Amplifier utilizes hand-wound air gapped dual mode output transformers. The user can configure the unit for all triode Push-Pull mode or Single-Ended mode. The transformer can be configured to drive three types of headphone loads, covering a range from 12 to 600 ohms.


    The enthusiast can also vary the Feedback from 0dB to 10dB, maintaining a ruler-flat frequency response across the audio band, demonstrating how stable the design is. For increased transparency and accuracy we have incorporated a Precision Stepped Relay Volume control with perfect channel balance. A balance control is also available for extra sensitivity. The Manley Headphone Amplifier operates fully symmetrical, enabling it to drive balanced headphones through its XLR output. Also available is the standard non-balanced "Jack" plug or TRS connection. Another very useful feature is a preamplifier output, which routes your first input through the system when not in use, no need for unplugging sources! The Manley Headphone amplifier can also be used as a stand-alone transformer coupled preamplifier, so it can be partnered with any power amplifier if so desired.


    With the advent of expensive and high technology headphones it was important for the Manley design team to think about protection. So the Manley Headphone Amplifier features a user defined headphone overload protection system. The user dials this in so precious headphones are never overdriven. For maximum performance and the lowest noise floor, The Manley Headphone Amplifier incorporates a very high-tech switching audiophile power supply. The high-tension and low-tension rails are all fully regulated offering super low impedance for a fast and dynamic response.


    The Manley Headphone Amplifier also incorporates a tone control circuit what? for an audiophile product!! Yes! With the expertise gleaned from building professional studio equipment, we have incorporated the best possible solution for a tone control. It is completely switchable, so for the real purist it is completely out of the circuit, but if you need that slight adjustment for a hard digital recording the feature is there.


    The Design


    The Manley Headphone Amplifier is a very unusual design. Zia Faruqi, who is responsible for running the engineering team and industrial design at Manley Laboratories, developed its concept. "I wanted a design that would reflect the use of this piece of equipment. Its shape was inspired by a head, a piece that you could rest your headphones on, a piece that you want to indulge yourself in" Mitch Margolis who worked on the Steelhead and our 300B amplifiers worked with our head engineer Humberto Rodriguez to finalize its design. Available in three different colors for today's lifestyle choices. Champagne & White, Titanium & Bronze and Copper & Black.


    Manley Labs
    $2,950.00
    Headphone Amplifier PRE-ORDER
    Buy Now
  • Direct Me Direct Me Quick View

    $13.99
    Buy Now
    x

    Direct Me

    Direct Me
    There's a Long Road Ahead
    Never Like This Before
    You Need Love Like I Do
    First Time, Last Time
    B Minor
    The Long and Winding Road
    Ain't My Stuff Good Enough?
    'Bout Love
    You Can't Go On Without Love
    Clydie King
    $13.99
    Vinyl LP Reissue - Sealed Buy Now
  • Fire Burn Cauldron Bubble Fire Burn Cauldron Bubble Quick View

    $13.99
    Buy Now
    x

    Fire Burn Cauldron Bubble

    Fugue To Rosie
    Await The Coming Day
    Why Be Lonely
    As I Lay Dying
    Feeling Alright
    Welcome To The Party
    Kool And The Gang
    Sunday Tree
    Tell The Truth
    Melting Pot
    $13.99
    Vinyl LP Reissue - Sealed Buy Now
  • VPI 299D Integrated Amplifier VPI 299D Integrated Amplifier Quick View

    $3,999.99
    Buy Now
    x

    VPI 299D Integrated Amplifier



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    VPI Collectible - Limited To 100


    Includes 90 Day Warranty For Tubes And 3 Year Warranty For Amplifier


    This amp is so good, I bought one myself! -Seth Frank, Owner of SoundStageDirect©


    Original created Harry Weisfeld long time family friend Steve Leung (VAS) collaborated together to bring back one of their favorites, the Scott 299D integrated amp. The integrated has a phono stage, amplifier, and headphone amp built right in. The Limited Edition has been restricted to 100 so grab this VPI collectible while you can.


    VPI Amplifier
    $3,999.99
    VPI 299D Integrated Amplifier Buy Now
  • Rega Ear Headphone Amplifier Rega Ear Headphone Amplifier Quick View

    $395.00
    Buy Now
    x

    Rega Ear Headphone Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The new Ear Headphone Amplifier benefits from an all new extruded aluminium case and new styling giving it more of a family feel to match its illustrious big brothers.


    The Ear simply connects to the tape output of an amplifier via phono leads, the headphones are plugged into the front panel and there is a link socket incase you need your tape output sockets for other use.


    Rega
    $395.00
    Rega Ear Headphone Amplifier Buy Now
  • Rega Osiris Integrated Amplifier Rega Osiris Integrated Amplifier Quick View

    $9,995.00
    Buy Now
    x

    Rega Osiris Integrated Amplifier


    40th



    2010 2012


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Introducing the Rega Osiris flagship integrated amplifier


    The Osiris is the culmination of Rega engineers 32 years experience in solid-state amplifier development. A no compromise audio amplifier using state of the art surface mount technology and a fully symmetrical circuit.


    Design


    A super high performance, 162 Watts into 8 Ohms (250 Watt 4 Ohms) dual mono amplifier housed in a custom Rega CNC machined aluminium case with high thermal efficiency heat sinks. Designed around minimalist high gain power amplifier and passive pre-amplifier circuit topology, a passive volume control and a single stage of power amplification between the input and the speakers the Osiris offers unrivalled performance and build quality.


    Technology


    The Osiris uses a low distortion high linearity and bandwidth common base voltage amplifier driver stage. This type of symmetrical circuit topology will provide the necessary voltage swings to enable the Osiris to drive any speaker system with the minimum of distortion. Eight Sanken 200 Watt output transistors are used in a triple high current output stage enabling the Osiris to drive even the most awkward of speaker systems with ease.


    The cascoded differential input amplifier uses two low noise LED referenced current generators. The open & closed loop feedback levels and gain bandwidth product components are optimised to give a tight and controlled sound stage, especially at the low frequency end of the audio range. Nichicon audio grade capacitors are used in bypass and decoupling positions.


    Electrolytic capacitors have been bypassed with polyester capacitors where necessary improving on the HF performance. Low inductance film SM power resistors are used in the output stage.


    Power Supply


    The Osiris uses two low noise purpose designed 400VA toroidal transformers using high-grade fully bonded core material.


    The transformers are mounted to the chassis using Rega's innovative mounting technique, which eliminates noise being transferred from the transformer to the case when the transformers are operating under arduous mains (line) conditions with high levels of asymmetric mains (line) distortion.


    These transformers combined with 40,000 Micro Farads of Rega K-Power smoothing capacitors per channel, provide more than enough current to drive the hardest of loads. All the power supplies utilise fast recovery rectifier diodes throughout. (Fast diodes generate less high frequency switching noise therefore giving rise to a cleaner DC).


    The input and low-level driver stages are fed from a regulated symmetrical tracking power supply with a low noise voltage reference, which provides a fully stabilised low noise voltage, ensuring the highest level of sonic purity.


    All the dedicated audio power supplies feed only the audio circuits. The input switching, display & micro controller and protection circuits have their own dedicated supplies, keeping the audio signal path as pure as possible.


    We hope that you enjoy this product as much as we have enjoyed creating it. - Rega


    All these features amalgamate to create the supreme level of performance found in the Osiris and provide a perfect partner for the Rega Isis Cd player.


    Rega Osiris
    $9,995.00
    Rega Osiris Integrated Amp Buy Now
  • Rega Ios Moving Coil Amplifier Rega Ios Moving Coil Amplifier Quick View

    $6,995.00
    Buy Now
    x

    Rega Ios Moving Coil Amplifier

    40th


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Designed as the ultimate MC phono stage and the perfect match for the Rega Apheta MC cartridge Ios has made the transition in to the reference style case to match Isis and Osiris. The new Ios has the addition of balanced XLR connections mute and mono functions. The PCB layout has been redesigned to improve the noise floor and the entire unit has been fully rewired with ultra low capacitance cabling.


    The function of a phono pre amplifier is to match the output from a pick up cartridge to the input of a line level amplifier. It is required to amplify the very low signals produced by the cartridge and also to equalise the sound in accordance with RIAA record cutting standard. Rega believes that moving coil and moving magnet cartridges require different types of phono pre amplifiers to achieve optimum performance. The IOS is therefore dedicated to moving coil cartridges and avoids compromises. We have avoided including any superfluous functions as they obstruct the signal path and degrade the sound quality.


    Design innovation


    The Rega Ios is a four stage all symmetrical amplifier. To provide optimum performance it is dedicated to amplifying the very low level signals that are generated by moving coil cartridges.


    The first stage uses a 1:10 step-up transformer, which can be optimised to the cartridge by the selection of the correct loading and zobel DC resistance correction network connected across the MC transformer secondary.


    The second stage is a symmetrical compound pair class A amplifier, using paralleled low noise Hitachi transistors in the input stage.This drives the passive high frequency part of the RIAA equalisation stage.


    The third stage is a symmetrical class A differential amplifier with a common base driver stage; this is also used as the active amplifier in the low frequency part of the RIAA equalisation stage. The fourth stage is the active filter, this configuration uses the same circuit as found in the second stage. The filter element uses a very high bandwidth operational amplifier.


    The power supply is a symmetrical discrete tracking power supply using fast diodes and a low noise voltage reference. Each stage has its own localised power supply, and LED referenced current generators. Very high quality, polypropylene capacitors have been used in the signal path. 1% tolerance polypropylene capacitors are used in the RIAA EQ stages and audio grade capacitors are used in the rest of the circuit.


    We hope that you enjoy this product as much as we have enjoyed creating it. - Rega


    Rega
    $6,995.00
    Rega Ios Moving Coil Amplifier Buy Now
Go to top