Vinyl. Our way of life since 2004 (877) 929-8729

VPI Dealer Authorized & Certified
Site Search
Menu Free shipping on domestic orders over $49.99! - We ship worldwide!
LP20 - 20% Off Vinyl
Home > Products for: '

All Speakers

'
Results per page:
  • AmpsandSound Hudson Horn-Loaded Loudspeaker 2 COLORS AVAILABLE AmpsandSound Hudson Horn-Loaded Loudspeaker Quick View

    $30,000.00
    Buy Now
    x

    AmpsandSound Hudson Horn-Loaded Loudspeaker


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    AmpsandSound Products Are Handmade In Small Batches and Go Through Extensive Quality Control


    The Hudson is a partial horn-loaded three-way loudspeaker system. Utilizing a direct radiating 15" woofer for low frequencies, and modern high-efficiency compression drivers mated to state-of-the-art horns which cover the all important midrange and highest frequencies, these big horn, small form loudspeakers offer the bass response, efficiency, dynamic capabilities, low distortion, and scale of much larger designs in a much smaller enclosure.


    The Hudson began life as a design project which attempted to marry the virtues of direct radiating bass with the largest horns possible. Initially, the Hudson was a two-chassis design. After a great deal of testing, and experimentation with different cabinet designs, Ampsandsound were successful in our quest to create a true full-range speaker system operating from 34hz - 20khz in a single enclosure.


    Its compact size makes it easier to install in most rooms and minimizes room interactions. The Hudson offers a delicate balance of scale, tonal accuracy, and rich detail in a design that will appeal to audiophiles who desire all of the positive attributes of horn-loaded designs but without the issues of size and room interaction that are inherent to many designs.


    The loudspeaker features a sophisticated, hand-wired crossover network, which utilizes high-order filters, and large air-core inductors for low signal loss. If the heart of the Hudson is its horns and midrange, the crossover represents its cerebral cortex. Ampsandsound spent countless hours on the crossover, in order to create a state-of-the-art design that minimizes frequency overlap, and achieves phase coherence and perfect time alignment.


    All three crossovers are hand-made and built to the same rigorous standards as our amplifiers and loudspeakers, utilizing Hyper-litz inductors and low Q capacitors. Each combined crossover weighs more than twenty-two pounds and is unlike anything you've seen or heard in horn-loaded loudspeakers.


    The Hudson's bass section utilizes a 15 woofer in a direct-radiating configuration that is front-ported to minimize interaction with front walls. Through the use of FFT analysis, ampsandsound has carefully built an inert cabinet that features strategic bracing and dampening. As a result, the Hudson is capable of high output with minimal excursion, and greatly reduced levels of distortion over conventional designs.


    The heart of the Hudson is its large CNC-cut midrange horn, which utilizes a hybrid tractrix flare, providing controlled horizontal dispersion and limiting vertical dispersion to reduce room interactions. The midrange horn is mated to a 2 large-format midrange compression driver with a 4 voice coil. The combination of a large, precision-made wood horn with a large throat and large midrange compression driver has resulted in a midrange that is tonally accurate, yet rich with detail. The midrange is smooth, fast-sounding, and easy to listen to for hours.


    The tweeter combines a 1 compression driver coupled to conical-tractrix hybrid horn providing exceptional polar responses without dips and peaks associated with other horn designs. The Hudson's tweeter offers both great extension, detail, and a true sense of airiness; which allows the loudspeaker to create a large and deep soundstage even when placed close to the wall behind it.


    AmpsandSound
    $30,000.00
    Horn-Loaded Loudspeaker (Pair) - 2 Colors Available
    Buy Now
  • Audioengine HD3 Speakers 3 COLORS AVAILABLE Audioengine HD3 Speakers Quick View

    $399.00
    Buy Now
    x

    Audioengine HD3 Speakers



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The ultimate personal music system

    The Audioengine HD Series was designed for the way people listen to music today and HD3 raises the bar and sets a new standard for compact mini music systems. HD3 fits just about anywhere you listen and was designed to play all your music from any device. Easy setup, simple but useful features, and real stereo sound make HD3 the go-to system for all your music!


    Today's music is available from many different sources including computers, tablets, smartphones, and turntables. HD3 is designed with multiple inputs to accommodate all of these digital and analog sources. HD3's Bluetooth receiver, which supports aptX and AAC codecs, has a range of about 100 feet so you can stream all your music from almost anywhere in your house. Its USB input bypasses your computer's lower-quality DAC for a high-fidelity listening experience. Lastly, dual analog inputs round out the HD3's impressive suite of connections.


    Versatile connectivity

    In the spirit of the HD Series, we've included features from some of our best-selling products making HD3 an incredibly versatile speaker system. Stream TIDAL, Spotify, Pandora, YouTube - or any other streaming service or media player - wirelessly from your smartphone, tablet or computer. You can also connect your favorite turntable and even connect a subwoofer, so no matter how you listen to music, HD3 has you covered.


    All your music, day and night

    HD3 includes a headphone output and volume control on the front panel so you can listen to your favorite headphones without disturbing the neighbors or significant other. HD3's built in headphone amplifier delivers a high-end sound that is a perfect match with even the most-demanding headphones.


    Retro-forward design

    HD3 was designed first for audio performance, but speakers also need to look great, right? The furniture-grade wood veneers, aluminum trim accents, and detachable magnetic grills give the HD3 a look and feel of old-school elegance that blends with any decor. Available in Satin Black for your stealth system as well as Walnut and Cherry wood finishes at no additional cost if you want to really show them off.


    Small speakers that pack a punch

    Built-in power amplifiers save space and eliminate the need to connect HD3 to a stereo receiver or external power amp. Simply plug the left speaker into a power outlet and connect the included speaker wire from the left to the right passive speaker. All internal components of the HD3 are designed and tuned together, so you'll get Audioengine's Signature Sound and a much more efficient system than traditional separate passive speakers and amplifiers.


    Audioengine Speakers
    $399.00
    Powered Speakers (Pair) - 3 Colors Available
    Buy Now
  • Audioengine A5+ Speakers (Bamboo) Audioengine A5+ Speakers (Bamboo) Quick View

    $469.00
    Buy Now
    x

    Audioengine A5+ Speakers (Bamboo)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Dynamic, well designed, and well made, the 5+ offers an elegant solution to the problem of choosing a high value desktop/nearfield monitor.

    - Steven Stone, Playback, AVGuide.com


    Premium Powered Bookshelf Speakers

    Audioengine 5+ (A5+) Premium Powered Speakers deliver audiophile-quality sound and features at a price that continues to set the standard for affordable high-quality audio. Connect your iDevice, computer, TV, or any other audio component for great stereo sound in any room.


    Affordable Audio

    The goal of Audioengine is to provide a high-end listening experience at affordable prices with easy to use, high-quality products. The Audioengine 5 powered speaker system was Audioengine's flagship model and has become a best seller. The new A5+ has the same award-winning signature sound as the original A5 but includes customer-requested upgrades and features.


    Versatile

    With custom Kevlar woofers, silk dome tweeters, and hand-built cabinets, the Audioengine 5+ includes a remote control, dual audio inputs and enhanced thermal management. You can charge your iDevice via the USB power port and also add a subwoofer to the variable output. Connect Audioengine 5+ to your computer's headphone jack or pair with a USB DAC to achieve an even higher level of sound quality. The Audioengine 5+ works with any computer and there's no software to install or settings to change.


    Easy Setup

    Built-in power amplifiers save space and eliminate the need to connect Audioengine 5+ to a stereo receiver or external power amp. Simply plug the left speaker into an AC outlet and connect the included speaker wire from the left to right speaker. All internal components of the A5+ are tuned together, providing a more efficient system requiring less power than passive speakers and amplifiers. With superior stereo separation and incredible imaging, A5+ has a clear sonic advantage over boomboxes or all-in-one systems.


    Small Speakers, Big Bass

    You won't hear any enhanced super-mega-hyper-monster boomy bass from these powered speakers. As with the original A5, the low end from the A5+ is real bass, very near to the originally-recorded music. From rap to classical to movies, you'll get tight, punchy bass with an awesome growl that will make you smile - regardless of the volume level.


    Hear the Difference

    The Audioengine 5+ Premium Powered Speaker System delivers the audio performance and aesthetic quality expected from Audioengine and continues to close the gap between your computer music and home hi-fi. Even if you're not an audio enthusiast we guarantee your music will sound better!


    Audioengine Speakers
    $469.00
    Audioengine A5+ Powered Bookshelf Speakers (Solid Carbonized Bamboo) Buy Now
  • Encore 50 Speakers Encore 50 Speakers Quick View

    $9,995.99
    Buy Now
    x

    Encore 50 Speakers


    Have a question about this product? Please email our href=mailto:audioadvisor@soundstagedirect.com>audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    There is no substitute for the pure musical involvement and enjoyment to be experienced when listening to the new Epos Encore 50. This unique Epos Flagship loudspeaker has been 3 years in the making but, there is no doubt the time taken to develop this exceptional loudspeaker has been well worth the wait.


    Each and every part of the Epos Encore 50 has been developed by Epos engineers to a standard not previously achieved by the company. From the original design concept through to the cabinet construction, speaker drive units, crossover and final voicing, the Encore 50 stands superior in every way.


    Cabinet

    It is tall and imposing yet exhibits elegance synonymous with Epos. Standing 1.2 metres high, it is deeper rather than wide and is supplied with a strong stylish painted MDF plinth to support its 50 kg weight and spread its footprint for improved stability and mechanical decoupling. Fully adjustable turned aluminium and steel spiked feet can raise or lower the speaker to adjust or tilt the level. The cabinet itself is made from a composite of birch-plywood and MDF which has been extensively strengthened internally using plywood bracing within the mid-range and bass enclosures.


    To ensure the lowest colouration, the cabinet and bracing have been optimised, following accelerometer measurements and listening tests. Hand selected and book-matched real wood veneer has been chosen give the most luxurious finish on an Epos speaker so far.


    Separate Bass, Mid-range and Crossover sections of the cabinet are hermetically sealed and allow the Crossover to be located in a convenient section at the bottom of the cabinet, accessed via the large, ventilated terminal panel on the bottom rear with a letter box opening in the plinth. All drive units are separately wired to the crossover section, using custom Epos solid core wire.


    The bass enclosure has a volume of 43 litres. Two 220mm woofers are bass-reflex loaded by one large diameter 90mm port, positioned mid-way between the woofers and flared at both ends to minimise port turbulence and harmonic distortion. The height and spacing of the woofers has been chosen to minimise the 'floor-bounce' cancellation, optimise bass output and ensure a smooth bass-mid range transition in room. The mid-range unit is in its own, braced, 8 litre sealed-box enclosure.


    Drive Units

    The 2 x 220 mm woofers and 158 mm mid-range cones are made from a Kevlar/carbon fibre/pulp mixture to combine high rigidity, with good inherent damping and feature concave dust caps coupled tightly to the cone. Frequency responses of both woofer and mid-range are inherently very smooth. They each incorporate a copper shorting ring in the magnetic circuit to reduce and linearise inductance and therefore, reduce harmonic and inter-modulation distortions at high sound pressure levels. The two woofer cones couple acoustically at low frequencies and are port loaded for extremely high power handling.


    The tweeter is a specially developed version of the Epos Mi tweeter, with anodised aluminium dome, Kapton voice coil former, braided lead-out wires and Ferro-Fluid damping. The centre pole is damped under the dome and vented into a contoured, felt-filled, rear chamber to damp the fundamental resonance frequency.


    Crossover

    The crossover design of the Epos Encore 50 is revolutionary. It allows the user unparalleled flexibility to compensate for individual room acoustics, without compromising sound quality in any way. The tonal balance of the speaker may be easily changed by the user to increase or decrease the tweeter and midrange output in 1.5dB steps, via an aperture in the bottom of the speaker and plinth. The crossovers use high-grade customised 'Epos' polypropylene capacitors and non-polarised electrolytic capacitors, which are bypassed with polypropylene capacitors on the mid-range and tweeter. It also uses air-core inductors, a tapped autotransformer for adjusting the mid-range output and laminated steel-core inductors. Metal-oxide resistors are paralleled where necessary to achieve high power rating and a custom heatsink is used to reduce the temperature.


    The high sensitivity mid-range is attenuated by a tapped auto transformer, which doubles as the high-pass crossover inductor. The tweeter network also has variable attenuation via metal-oxide resistors. The maximum sensitivity treble position by-passes all attenuation. Passive components are mounted on a high quality, glass fibre PCB, mechanically isolated from the cabinet.


    The crossover PCB's are designed to be completely, or partially, by-passed, to enable the user to configure the speaker in passive or active mode. Epos, will offer a custom DAC with programmable digital crossover to suit any make of amplification system. In short, it has unparalleled flexibility.


    The ongoing development for a future user upgrade to the Epos Encore 50 will represent yet another great leap forward in Epos speaker design and will have music lovers giving it a 'standing ovation' whilst applauding this exceptional speaker.


    Plinth

    A custom made MDF plinth helps to extend the footprint of the speaker and decouple mechanical vibrations from the cabinet. This makes the speaker more stable in a domestic environment and improves low frequency performance.


    It also allows access to the crossover adjustment patch-board. Adjustable metal feet allow the height and angle of the speaker to be adjusted. This enables a custom skateboard to fit underneath so the speaker can be transported on wheels to a different position and then carefully lowered into place. This is supplied with the speakers.


    This product is not eligible for discount.


    Epos Speakers
    $9,995.99
    Encore 50 3-Way Flagship Speaker Buy Now
  • JBL Studio 270 Speakers JBL Studio 270 Speakers Quick View

    $799.99
    Buy Now
    x

    JBL Studio 270 Speakers


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Includes 2 Speakers


    Unrivaled Sound. Unrivaled Technology. Pure JBL.


    Floorstanding loudspeaker. Groundbreaking sound. As part of the groundbreaking 10-piece JBL Studio 2 loudspeaker series, the Studio 270 vaults you into a world where legacy sound-craft and visionary technology go hand-in-hand in shaping a listening experience like none before. The Studio 270's 4" and 6.5" PolyPlas drivers are designed to bring you pitch-perfect vocal clarity and tight bass that's as accurate as it is cinematic. Add to these a built-in High Definition Imaging (HDI) waveguide design and a 1" CMMD Lite high-frequency driver, and you've got a loudspeaker that takes its cues from JBL's own legendary M2 Master Reference Monitor. Combine all this with the sleek, urbane design of the loudspeaker itself - both inside and out - and you're dealing with a rare breed of sonic horsepower and brainpower ready to define its era.


    JBL Speakers
    $799.99
    JBL Studio 270 3-Way 6.5 Floorstanding Loudspeaker Buy Now
  • All Or Nothing At All All Or Nothing At All Quick View

    $49.99
    Buy Now
    x

    All Or Nothing At All

    Mastered by George Marino at Sterling Sound


    ...the third (Billie Holiday album) to receive the two-disc 45 RPM treatment by Analogue Productions. ... Billie sounds like she's at the microphone in your living room. The instruments are spread out between the speakers and there is plenty of depth. A pristine original has a bit more pronounced vocal sibilance and air, and this reissue smooths that out a bit. That aside, this is a fabulous reissue of essential music. Highest recommendation. - Recording = 9.5/10; Music = 10/10 - Dennis D. Davis, Hi-Fi +, Issue 95


    ...these are all truly classic Verve titles that you simply don't want to miss...most importantly, the sound of these reissues is nothing short of astounding. Particularly the early Billie and Ella mono records are incredible treasures of sonic beauty. I'd definitely ask Santa for the whole set, or, if you want to cherry pick, the most classic titles. Whatever you decide, you owe yourself at least a half dozen! Winner of a 2012 Positive Feedback Online Writers' Choice Award - Danny Kaey, Positive Feedback Online, November/December 2011


    After the publication of her autobiography, Lady Sings The Blues, Billie Holiday was doing good business in clubs in what turned out to be a last burst of stardom. We cannot know why she stopped recording for Norman Granz after January 1957 - but the present collection is a magnificent culmination of her years with the producer.


    Originally released in 1955.

    1. Do Nothing'Till You Hear From Me
    2. Cheek to Cheek
    3. Ill Wind
    4. Speak Low
    5. I Wished on the Moon
    6. But Not for Me
    7. All Or Nothing at All
    8. We'll Be Together Again
    9. Sophisticated Lady
    10. April In Paris
    11. Say It Isn't So
    12. Love Is Here to Stay
    Billie Holiday
    $49.99
    200 Gram Audiophile Virgin Vinyl LP 45 RPM Mono - 2 LPs Sealed Buy Now
  • Audioengine A5+ Speakers (Satin Black) Audioengine A5+ Speakers (Satin Black) Quick View

    $399.00
    Buy Now
    x

    Audioengine A5+ Speakers (Satin Black)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Dynamic, well designed, and well made, the 5+ offers an elegant solution to the problem of choosing a high value desktop/nearfield monitor.

    - Steven Stone, Playback, AVGuide.com


    Premium Powered Bookshelf Speakers

    Audioengine 5+ (A5+) Premium Powered Speakers deliver audiophile-quality sound and features at a price that continues to set the standard for affordable high-quality audio. Connect your iDevice, computer, TV, or any other audio component for great stereo sound in any room.


    Affordable Audio

    The goal of Audioengine is to provide a high-end listening experience at affordable prices with easy to use, high-quality products. The Audioengine 5 powered speaker system was Audioengine's flagship model and has become a best seller. The new A5+ has the same award-winning signature sound as the original A5 but includes customer-requested upgrades and features.


    Versatile

    With custom Kevlar woofers, silk dome tweeters, and hand-built cabinets, the Audioengine 5+ includes a remote control, dual audio inputs and enhanced thermal management. You can charge your iDevice via the USB power port and also add a subwoofer to the variable output. Connect Audioengine 5+ to your computer's headphone jack or pair with a USB DAC to achieve an even higher level of sound quality. The Audioengine 5+ works with any computer and there's no software to install or settings to change.


    Easy Setup

    Built-in power amplifiers save space and eliminate the need to connect Audioengine 5+ to a stereo receiver or external power amp. Simply plug the left speaker into an AC outlet and connect the included speaker wire from the left to right speaker. All internal components of the A5+ are tuned together, providing a more efficient system requiring less power than passive speakers and amplifiers. With superior stereo separation and incredible imaging, A5+ has a clear sonic advantage over boomboxes or all-in-one systems.


    Small Speakers, Big Bass

    You won't hear any enhanced super-mega-hyper-monster boomy bass from these powered speakers. As with the original A5, the low end from the A5+ is real bass, very near to the originally-recorded music. From rap to classical to movies, you'll get tight, punchy bass with an awesome growl that will make you smile - regardless of the volume level.


    Hear the Difference

    The Audioengine 5+ Premium Powered Speaker System delivers the audio performance and aesthetic quality expected from Audioengine and continues to close the gap between your computer music and home hi-fi. Even if you're not an audio enthusiast we guarantee your music will sound better!


    Audioengine Speakers
    $399.00
    Audioengine A5+ Powered Bookshelf Speakers (Satin Black) Buy Now
  • Audioengine A5+ Speakers (Hi-Gloss White) Audioengine A5+ Speakers (Hi-Gloss White) Quick View

    $399.00
    Buy Now
    x

    Audioengine A5+ Speakers (Hi-Gloss White)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Dynamic, well designed, and well made, the 5+ offers an elegant solution to the problem of choosing a high value desktop/nearfield monitor.

    - Steven Stone, Playback, AVGuide.com


    Premium Powered Bookshelf Speakers

    Audioengine 5+ (A5+) Premium Powered Speakers deliver audiophile-quality sound and features at a price that continues to set the standard for affordable high-quality audio. Connect your iDevice, computer, TV, or any other audio component for great stereo sound in any room.


    Affordable Audio

    The goal of Audioengine is to provide a high-end listening experience at affordable prices with easy to use, high-quality products. The Audioengine 5 powered speaker system was Audioengine's flagship model and has become a best seller. The new A5+ has the same award-winning signature sound as the original A5 but includes customer-requested upgrades and features.


    Versatile

    With custom Kevlar woofers, silk dome tweeters, and hand-built cabinets, the Audioengine 5+ includes a remote control, dual audio inputs and enhanced thermal management. You can charge your iDevice via the USB power port and also add a subwoofer to the variable output. Connect Audioengine 5+ to your computer's headphone jack or pair with a USB DAC to achieve an even higher level of sound quality. The Audioengine 5+ works with any computer and there's no software to install or settings to change.


    Easy Setup

    Built-in power amplifiers save space and eliminate the need to connect Audioengine 5+ to a stereo receiver or external power amp. Simply plug the left speaker into an AC outlet and connect the included speaker wire from the left to right speaker. All internal components of the A5+ are tuned together, providing a more efficient system requiring less power than passive speakers and amplifiers. With superior stereo separation and incredible imaging, A5+ has a clear sonic advantage over boomboxes or all-in-one systems.


    Small Speakers, Big Bass

    You won't hear any enhanced super-mega-hyper-monster boomy bass from these powered speakers. As with the original A5, the low end from the A5+ is real bass, very near to the originally-recorded music. From rap to classical to movies, you'll get tight, punchy bass with an awesome growl that will make you smile - regardless of the volume level.


    Hear the Difference

    The Audioengine 5+ Premium Powered Speaker System delivers the audio performance and aesthetic quality expected from Audioengine and continues to close the gap between your computer music and home hi-fi. Even if you're not an audio enthusiast we guarantee your music will sound better!


    Audioengine Speakers
    $399.00
    Audioengine A5+ Powered Bookshelf Speakers (Hi-Gloss White) Buy Now
  • Audioengine A2+ Speakers (Satin Black) Audioengine A2+ Speakers (Satin Black) Quick View

    $249.00
    Buy Now
    x

    Audioengine A2+ Speakers (Satin Black)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    A2+ is the gateway drug for computer audio.

    - Steve Guttenberg, CNET


    Premium Powered Desktop Speaker System


    The award-winning Audioengine 2 powered desktop speakers just got better. With a built-in digital-to-analog converter (DAC), the Audioengine 2+ allows you to send high-quality digital audio direct from your computer's USB port.


    - Excellent sound with elegant simplicity and a new standard for computer audio

    - Versatile connections, including USB digital audio and subwoofer output

    - Designed for your desktop but also sounds great across the room


    Upgrade your Audio

    The Audioengine 2+ is the new standard for computer audio and these small, but high-performance speakers are the perfect upgrade for your computer. Everyone knows the difference between custom-built, small batch products and the disappointment of mass-produced and over-marketed products. The A2+ was designed and hand-built with the goal of exceeding expectations of both value and performance.


    Brotherly Love

    The Audioengine 2+ is about one-third the size of our flagship Audioengine 5+ powered speakers and an ideal size for your desktop or smaller room. We used the same custom tweeters as in the Audioengine 5+, matched them with compact Kevlar woofers, then added high-performance amplifiers with high-quality connectors. All this great engineering is wrapped in wood cabinets with a hand-polished finish to create a premium quality desktop multimedia speaker system that puts all those sad plastic computer speakers to shame!


    Smaller Speakers, Still Big Bass

    To say that the bass on the Audioengine 2+ is substantial for their size may be an understatement, but you should be the judge. The bass was teased from the A2+ with some clever acoustic and electrical design without using any digital signal processing or fake bass boost circuits. Wood remains a preferred speaker enclosure material for its stiffness at higher volume levels and the cabinet focuses just the right amount of low end from the tuned front port slots.


    Versatile and Efficient

    The A2+ was designed for your desktop but their superb soundstage and imaging also makes them the perfect choice for across the room. Well-suited for all your music, movies and games, the A2+ sounds great with or without a subwoofer. Using a similar analog design as the Audioengine 5+, the A2+ power amplifiers are built inside the left speaker providing a very efficient system. An auto-standby idle mode is also included to conserve power when you're not playing music.


    Easy Connections

    The A2+ features analog amplifiers that are built into the left speaker, while the right speaker is passive so setup is simple. Just plug the left speaker into AC power and connect the included speaker wire from left to right. We've included minijack, RCA, and USB inputs for easy connection to your computer or iDevice and other cables you may need are included. There is no software or plug-ins to install and A2+ works with any computer or music player. The A2+ also has a variable RCA output for connecting a subwoofer, upgraded connectors, improved accessory cables, and a redesigned power supply.


    Minding the Gap

    The Audioengine 2+ sets a new level of audio and aesthetic quality for Powered Multimedia Speakers and further closes the gap between computer speakers and home audio. Even if you're not an audio enthusiast, we guarantee you will still hear a difference!


    Audioengine Speakers
    $249.00
    Audioengine A2+ Powered Speakers (Satin Black) Buy Now
  • Audioengine A2+ Speakers (Hi-Gloss White) Audioengine A2+ Speakers (Hi-Gloss White) Quick View

    $249.00
    Buy Now
    x

    Audioengine A2+ Speakers (Hi-Gloss White)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    A2+ is the gateway drug for computer audio.

    - Steve Guttenberg, CNET


    Premium Powered Desktop Speaker System


    The award-winning Audioengine 2 powered desktop speakers just got better. With a built-in digital-to-analog converter (DAC), the Audioengine 2+ allows you to send high-quality digital audio direct from your computer's USB port.


    - Excellent sound with elegant simplicity and a new standard for computer audio

    - Versatile connections, including USB digital audio and subwoofer output

    - Designed for your desktop but also sounds great across the room


    Upgrade your Audio

    The Audioengine 2+ is the new standard for computer audio and these small, but high-performance speakers are the perfect upgrade for your computer. Everyone knows the difference between custom-built, small batch products and the disappointment of mass-produced and over-marketed products. The A2+ was designed and hand-built with the goal of exceeding expectations of both value and performance.


    Brotherly Love

    The Audioengine 2+ is about one-third the size of our flagship Audioengine 5+ powered speakers and an ideal size for your desktop or smaller room. We used the same custom tweeters as in the Audioengine 5+, matched them with compact Kevlar woofers, then added high-performance amplifiers with high-quality connectors. All this great engineering is wrapped in wood cabinets with a hand-polished finish to create a premium quality desktop multimedia speaker system that puts all those sad plastic computer speakers to shame!


    Smaller Speakers, Still Big Bass

    To say that the bass on the Audioengine 2+ is substantial for their size may be an understatement, but you should be the judge. The bass was teased from the A2+ with some clever acoustic and electrical design without using any digital signal processing or fake bass boost circuits. Wood remains a preferred speaker enclosure material for its stiffness at higher volume levels and the cabinet focuses just the right amount of low end from the tuned front port slots.


    Versatile and Efficient

    The A2+ was designed for your desktop but their superb soundstage and imaging also makes them the perfect choice for across the room. Well-suited for all your music, movies and games, the A2+ sounds great with or without a subwoofer. Using a similar analog design as the Audioengine 5+, the A2+ power amplifiers are built inside the left speaker providing a very efficient system. An auto-standby idle mode is also included to conserve power when you're not playing music.


    Easy Connections

    The A2+ features analog amplifiers that are built into the left speaker, while the right speaker is passive so setup is simple. Just plug the left speaker into AC power and connect the included speaker wire from left to right. We've included minijack, RCA, and USB inputs for easy connection to your computer or iDevice and other cables you may need are included. There is no software or plug-ins to install and A2+ works with any computer or music player. The A2+ also has a variable RCA output for connecting a subwoofer, upgraded connectors, improved accessory cables, and a redesigned power supply.


    Minding the Gap

    The Audioengine 2+ sets a new level of audio and aesthetic quality for Powered Multimedia Speakers and further closes the gap between computer speakers and home audio. Even if you're not an audio enthusiast, we guarantee you will still hear a difference!


    Audioengine Speakers
    $249.00
    Audioengine A2+ Powered Speakers (Hi-Gloss White) Buy Now
  • Elan 15 Speakers - Cherry Elan 15 Speakers - Cherry Quick View

    $1,399.99
    Buy Now
    x

    Elan 15 Speakers - Cherry


    Have a question about this product? Please email our href=mailto:audioadvisor@soundstagedirect.com>audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Elan 15 is the larger of the two bookshelf speakers in this new range. It has been designed to hold true to Epos's purist principles of simple crossover, well-behaved drive units and clean understated aesthetics, yet deliver a 'big-speaker' performance. It has a larger cabinet and woofer cone than Elan 10 and, as a result, offers notable advantages in sensitivity, bass output and power handling. As you would expect, the Epos design philosophy delivers the very best sound quality and musical performance.


    Design

    Epos has applied the finest wood veneers, for a high-quality finish. To minimize unwanted vibration and coloration, extensive horizontal and vertical internal bracing has been added to the sturdy 18mm MDF cabinets. For optimum performance, Elan 15 should be stand mounted. Epos make a stand to suite this and other Elan models.


    Elan 15 is supplied with an audiophile baffle with no visible fixing screws, grille-fixing holes or cloth. The baffle fits snugly around the tweeter and is gently contoured around the woofer. So, unlike a conventional grille frame, there are no obstructions or sharp edges to cause reflections and sound colorations.


    For a more family-friendly appearance and improved protection, optional cloth-covered grilles are packed in the carton. It's simplicity itself to change them over.


    Tweeter

    Epos has developed a new soft-dome tweeter. By using virtual-performance CAD simulation tools, Epos has achieved very high performance with a sound which combines clarity and smoothness, in equal measure.


    The new tweeter has a low resonance frequency, high sensitivity and extended high frequency response. With its 25mm (one inch) doped-fabric dome, short horn, high-temperature Ferro-fluid cooled voice-coil, and shielded neodymium magnet, it is capable of high output levels for extended periods.


    Epos has also developed a brand new 187mm bass/mid driver for the Elan 15. This is built on to an open-frame cast aluminium alloy chassis with a generously ventilated spider and vented magnet pole, to minimize colorations and distortions.


    Mid-Bass

    This bass/mid unit features a high-quality polypropylene cone and 'bullet'-shaped dust cap. These form a stiff yet pliable, well-damped structure which retains its shape, even under high power, and help the woofer to produce a dynamic sound, with a very even frequency response and smooth roll off.


    The woofer is loaded by a good-sized port, flared at both ends to reduce turbulence, to produce more deep, clean, detailed bass than expected from such a modest cabinet, coupled with a clear and smooth mid-range.


    This medium-sized speaker is much more sensitive than you'd expect, making it suitable for use with a wide range of amplifiers, from as small as 20 watts to as large as 120 watts.


    Crossover

    In typical Epos fashion, the Elan 15 crossover is as simple as we can make it: both the woofer and tweeter networks are 2nd order filters at 3.2 kHz. To ensure the highest sound quality, all the resistors are metal oxide, all the capacitors are high-quality polypropylene-foil dielectric, and internal wiring is solid core. Inductors are designed for low distortion even at high powers: air-core for the tweeter and an over-sized laminated-iron cored coil for the woofer. The input terminals are bi-wirable.


    Detail

    We paid great attention to every single minute detail during the design of the Elan 15, to give customers the best sound at the best price. It comes as no surprise that this elegant speaker will have you in awe from the first note. In addition to the astonishing bass power for its size, sound stage, depth and detail are truly exceptional, with a clarity that outshines the competition and many higher priced speakers.


    This is a truly eye and ear-opening loudspeaker that will keep you enthralled listening to your favorite tracks for many years to come.


    This product is not eligible for discount.


    Epos Speakers
    $1,399.99
    Elan 10 2-Way Bookshelf Speakers - Cherry Buy Now
  • Elan 35 Speakers - Black Elan 35 Speakers - Black Quick View

    $2,399.99
    Buy Now
    x

    Elan 35 Speakers - Black


    Have a question about this product? Please email our href=mailto:audioadvisor@soundstagedirect.com>audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Elan 35 is the largest floor-stand speaker in this new range. Its design holds true to the purist principles followed by Epos. The two woofers work together at low frequencies to provide even higher sensitivity and power handling than the bookshelf models - in addition to delivering deeper and more powerful bass. We believe this design philosophy delivers the very best sound quality and musical performance for the money.


    Design

    Only the finest real-wood veneers are selected, book-matched and hand-laid. Several coats of polyurethane are applied and polished for a high-quality finish. To minimise unwanted vibration and coloration, extensive horizontal and vertical internal bracing are positioned inside the sturdy 18mm thick MDF cabinets. For optimum performance and stability, they should be fitted with the plinths supplied, together with the adjustable spiked feet, designed to decouple unwanted energy from the cabinet into the floor.


    Elan 35 is supplied with two baffles. The standard audiophile baffle with no visible fixing screws is fitted. If required, this can easily be swapped for the alternative cloth covered version, which is designed with the same profile as the naked baffle. Both types of baffle fit snugly around the tweeter and are both gently contoured around the woofers. So, unlike a conventional grille frame, there are no obstructions or sharp edges to cause reflections and sound colorations. The sound from both types of baffle will therefore sound similar.


    Tweeter

    Epos has developed a new soft-dome tweeter for the Epic and Elan range. By using virtual-performance CAD simulation tools, this new tweeter has been designed to achieve the accuracy and speed of a metal dome but with smoothness associated with a soft dome. It has a low resonance frequency, high sensitivity and extended high frequency response. With its 25mm (one inch) doped-fabric dome, short horn, high-temperature Ferro-fluid cooled voice-coil and shielded neodymium magnet, it is capable of high output levels for extended periods. Its natural high sensitivity is necessary to match the much increased output from the new bass and mid-range drivers.


    Mid-Bass

    A new long-throw eight-Ohm 187mm bass/mid driver has been developed for the Elan 35. Built on to an open-frame cast-aluminium alloy chassis, with a generously ventilated spider and vented magnet pole, this driver minimises colorations and distortions while allowing greater sound pressure levels than earlier Epos drivers.


    The bass/mid units feature a high-quality polypropylene cone and 'bullet'-shaped dust cap. These form a stiff yet pliable, well-damped structure which retains its shape, even at high power. This helps the woofers to produce a dynamic sound, with a very even frequency response and naturally smooth roll-off. The lower woofer is rolled-off by the crossover (filtered) so that it only plays bass, allowing the top mid-woofer to play bass and mid-range smoothly. The mid-woofer is rolled-off (filtered) at higher frequencies by the crossover to integrate properly with the tweeter. This is essentially a true 2 ½ way configuration.


    Both woofers are loaded by a very large diameter port, flared at both ends, to reduce turbulence. Together they produce plenty of clean deep bass coupled with a clear, smooth and detailed mid-range. In some rooms, or in placing them close to a wall or corner of a room, this may be too much, so we have supplied a custom foam bung to fit inside the entrance to the port to restrict the airflow and roll-off the bass earlier.


    A special feature of this floor-standing speaker is its high sensitive, making it suitable for use with a wide range of amplifiers, from as small as 10 watts to as large as 200 watts into 4 Ohms. So, tube fans should find this amp a perfect match.


    Crossover

    In typical Epos fashion, the Elan 35 crossover is as simple as we can make it: both the woofer and tweeter networks are 2nd order filters at 800Hz and 3.2kHz. To ensure the highest sound quality, all the resistors are metal oxide, all the capacitors are high-quality polypropylene-foil dielectric types and internal wiring uses proprietary solid-core wire covered in a sponge sheath to prevent vibration. Inductors are designed for low distortion even at high powers: air-core for the tweeter and an over-sized laminated-iron core for the woofer. All connections to drive units and crossover are hand soldered. The input terminals are bi-wirable, using a proprietary metal terminal panel with solid metal binding post equipped for 4mm plus and large spade lugs.


    Detail

    We paid great attention to every single minute detail during the design of the Elan 35, to give customers the best sound at the best price. It comes as no surprise that this elegant speaker will have you in awe from the first note. In addition to the astonishing bass power, detail and depth, sound stage, depth and detail are truly exceptional, with a clarity that outshines the competition and many higher priced speakers.


    This is a truly eye and ear-opening loudspeaker that will keep you enthralled listening to your favorite tracks for many years to come.


    This product is not eligible for discount.


    Epos Speakers
    $2,399.99
    Elan 35 3-Way Floor-Standing Speakers - Black Buy Now
  • Dali Kubik Free Speakers - Red Dali Kubik Free Speakers - Red Quick View

    $995.00
    Buy Now
    x

    Dali Kubik Free Speakers - Red


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The essence of the DALI KUBIK FREE is connectivity. This elegantly designed active speaker enables you to enjoy music from a wide variety of sources and can be connected via Bluetooth, USB, Optical or Analog inputs.


    Connectivity

    Bluetooth and Optical input is just two of the seven possible connection types that the KUBIK system offers. The broad range of connectors ensure that any device will connect to the KUBIK system at the best possible quality. To improve ease of use even more, the KUBIK system offers IR learning that enables the use of an existing remote control to navigate the KUBIK system.


    The DALI DNA

    By working with many of DALI's well-known speaker technologies like the soft dome tweeter, wood fibre cones, low-loss rubber surrounds and a glass reinforced polymer basket, the KUBIK system is clearly a true DALI speaker at its core. Adding a 4 channel stereo Class D amplifier into the mix only underlines the development team's dedication to making the KUBIK system a real Hi-Fi speaker.


    The KUBIK system consists of two elements the KUBIK FREE and the KUBIK XTRA. The two components can be setup in three different ways. Using the KUBIK FREE alone as a standalone system, using the KUBIK FREE and the KUBIK XTRA together in a stereo system or using the KUBIK FREE and KUBIK XTRA together in a two room standalone system.


    Build quality

    The main housing is based on one piece of extruded aluminium. This serves to strengthen the entire product giving it a solid feel and ensures that all components can be fitted tightly onto the structure eliminating vibrations. The back plate also acts as heat transfer for the amplifier and power supply. The top of the KUBIK is crafted from the same aluminium and reveals the solid build of the KUBIK FREE.


    Amplifier

    The 100 Watts Class D amplifier is a true active solution offering a fully digital crossover, direct handling of digital sources, and a high quality AD converter. The four channel stereo amplifier (4 x 25 Watts) controls the audio signal to the woofer and the tweeter module individually.


    This is a major part of the high quality performance of the KUBIK system since it makes it possible to control and optimize the audio stream perfectly for the drivers used in the KUBIK system. Having that level of control lets the acoustic engineers transform every bit of information into driver movement. This truly is a combination where two plus two equals 5.


    Dali Speakers
    $995.00
    Dali Kubik Free - Red Buy Now
  • Dali Kubik Free Speakers -  Black Dali Kubik Free Speakers - Black Quick View

    $995.00
    Buy Now
    x

    Dali Kubik Free Speakers - Black


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The essence of the DALI KUBIK FREE is connectivity. This elegantly designed active speaker enables you to enjoy music from a wide variety of sources and can be connected via Bluetooth, USB, Optical or Analog inputs.


    Connectivity

    Bluetooth and Optical input is just two of the seven possible connection types that the KUBIK system offers. The broad range of connectors ensure that any device will connect to the KUBIK system at the best possible quality. To improve ease of use even more, the KUBIK system offers IR learning that enables the use of an existing remote control to navigate the KUBIK system.


    The DALI DNA

    By working with many of DALI's well-known speaker technologies like the soft dome tweeter, wood fibre cones, low-loss rubber surrounds and a glass reinforced polymer basket, the KUBIK system is clearly a true DALI speaker at its core. Adding a 4 channel stereo Class D amplifier into the mix only underlines the development team's dedication to making the KUBIK system a real Hi-Fi speaker.


    The KUBIK system consists of two elements the KUBIK FREE and the KUBIK XTRA. The two components can be setup in three different ways. Using the KUBIK FREE alone as a standalone system, using the KUBIK FREE and the KUBIK XTRA together in a stereo system or using the KUBIK FREE and KUBIK XTRA together in a two room standalone system.


    Build quality

    The main housing is based on one piece of extruded aluminium. This serves to strengthen the entire product giving it a solid feel and ensures that all components can be fitted tightly onto the structure eliminating vibrations. The back plate also acts as heat transfer for the amplifier and power supply. The top of the KUBIK is crafted from the same aluminium and reveals the solid build of the KUBIK FREE.


    Amplifier

    The 100 Watts Class D amplifier is a true active solution offering a fully digital crossover, direct handling of digital sources, and a high quality AD converter. The four channel stereo amplifier (4 x 25 Watts) controls the audio signal to the woofer and the tweeter module individually.


    This is a major part of the high quality performance of the KUBIK system since it makes it possible to control and optimize the audio stream perfectly for the drivers used in the KUBIK system. Having that level of control lets the acoustic engineers transform every bit of information into driver movement. This truly is a combination where two plus two equals 5.


    Dali Speakers
    $995.00
    Dali Kubik Free - Black Buy Now
  • Dali Kubik Free Speakers - White Dali Kubik Free Speakers - White Quick View

    $995.00
    Buy Now
    x

    Dali Kubik Free Speakers - White


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The essence of the DALI KUBIK FREE is connectivity. This elegantly designed active speaker enables you to enjoy music from a wide variety of sources and can be connected via Bluetooth, USB, Optical or Analog inputs.


    Connectivity

    Bluetooth and Optical input is just two of the seven possible connection types that the KUBIK system offers. The broad range of connectors ensure that any device will connect to the KUBIK system at the best possible quality. To improve ease of use even more, the KUBIK system offers IR learning that enables the use of an existing remote control to navigate the KUBIK system.


    The DALI DNA

    By working with many of DALI's well-known speaker technologies like the soft dome tweeter, wood fibre cones, low-loss rubber surrounds and a glass reinforced polymer basket, the KUBIK system is clearly a true DALI speaker at its core. Adding a 4 channel stereo Class D amplifier into the mix only underlines the development team's dedication to making the KUBIK system a real Hi-Fi speaker.


    The KUBIK system consists of two elements the KUBIK FREE and the KUBIK XTRA. The two components can be setup in three different ways. Using the KUBIK FREE alone as a standalone system, using the KUBIK FREE and the KUBIK XTRA together in a stereo system or using the KUBIK FREE and KUBIK XTRA together in a two room standalone system.


    Build quality

    The main housing is based on one piece of extruded aluminium. This serves to strengthen the entire product giving it a solid feel and ensures that all components can be fitted tightly onto the structure eliminating vibrations. The back plate also acts as heat transfer for the amplifier and power supply. The top of the KUBIK is crafted from the same aluminium and reveals the solid build of the KUBIK FREE.


    Amplifier

    The 100 Watts Class D amplifier is a true active solution offering a fully digital crossover, direct handling of digital sources, and a high quality AD converter. The four channel stereo amplifier (4 x 25 Watts) controls the audio signal to the woofer and the tweeter module individually.


    This is a major part of the high quality performance of the KUBIK system since it makes it possible to control and optimize the audio stream perfectly for the drivers used in the KUBIK system. Having that level of control lets the acoustic engineers transform every bit of information into driver movement. This truly is a combination where two plus two equals 5.


    Dali Speakers
    $995.00
    Dali Kubik Free - White Buy Now
  • Dali Zensor 7 Speakers - White Dali Zensor 7 Speakers - White Quick View

    $1,195.00
    Buy Now
    x

    Dali Zensor 7 Speakers - White


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Standing 97.8 cm, the flagship model of the series is both noticeable and contemporarily becoming in its high-gloss lacquered finish. If you really need the full blown sonic experience in a mid to large sized room at an affordable level, this is where to go!


    Being the Magnus Opus of the series, only ZENSOR 7 is equipped with 2x7" woofers. The larger cone area on all ZENSOR's compared to market standards ensures a highly effortless and authentic reproduction of musical dynamics. Add to this a 25 mm soft dome tweeter, which, in order to reproduce high frequencies of uppermost accuracy, is just half the weight of most soft dome tweeters on the market today.


    Every detail is handled with care. A few examples: the stylish, rounded edges reduces diffractions, which minimizes distortion; solid aluminium complements the front baffle; an aluminium base elevates the speaker from the floor; and a detachable front grille is included for flexible appearances.


    In other words: Our vision is not to make another traditional loudspeaker, but to have it be a unique and fully satisfying experience against the backdrop of our roots and core values. Thus ZENSOR 7 is capable of reproducing the finest details from a stereo signal and serving as the truly powerful speaker - by itself or as forceful front speaker in a surround set up.


    We give you: DALI ZENSOR 7 - power and detail, when you need it.


    Dali Speakers
    $1,195.00
    Dali Zensor 7 White - Pair Buy Now
  • Dali Zensor 7 Speakers - Black Dali Zensor 7 Speakers - Black Quick View

    $1,195.00
    Buy Now
    x

    Dali Zensor 7 Speakers - Black


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Standing 97.8 cm, the flagship model of the series is both noticeable and contemporarily becoming in its high-gloss lacquered finish. If you really need the full blown sonic experience in a mid to large sized room at an affordable level, this is where to go!


    Being the Magnus Opus of the series, only ZENSOR 7 is equipped with 2x7" woofers. The larger cone area on all ZENSOR's compared to market standards ensures a highly effortless and authentic reproduction of musical dynamics. Add to this a 25 mm soft dome tweeter, which, in order to reproduce high frequencies of uppermost accuracy, is just half the weight of most soft dome tweeters on the market today.


    Every detail is handled with care. A few examples: the stylish, rounded edges reduces diffractions, which minimizes distortion; solid aluminium complements the front baffle; an aluminium base elevates the speaker from the floor; and a detachable front grille is included for flexible appearances.


    In other words: Our vision is not to make another traditional loudspeaker, but to have it be a unique and fully satisfying experience against the backdrop of our roots and core values. Thus ZENSOR 7 is capable of reproducing the finest details from a stereo signal and serving as the truly powerful speaker - by itself or as forceful front speaker in a surround set up.


    We give you: DALI ZENSOR 7 - power and detail, when you need it.


    Dali Speakers
    $1,195.00
    Dali Zensor 7 Black - Pair Buy Now
  • Dali Zensor 7 Speakers - Walnut Dali Zensor 7 Speakers - Walnut Quick View

    $1,195.00
    Buy Now
    x

    Dali Zensor 7 Speakers - Walnut


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Standing 97.8 cm, the flagship model of the series is both noticeable and contemporarily becoming in its high-gloss lacquered finish. If you really need the full blown sonic experience in a mid to large sized room at an affordable level, this is where to go!


    Being the Magnus Opus of the series, only ZENSOR 7 is equipped with 2x7" woofers. The larger cone area on all ZENSOR's compared to market standards ensures a highly effortless and authentic reproduction of musical dynamics. Add to this a 25 mm soft dome tweeter, which, in order to reproduce high frequencies of uppermost accuracy, is just half the weight of most soft dome tweeters on the market today.


    Every detail is handled with care. A few examples: the stylish, rounded edges reduces diffractions, which minimizes distortion; solid aluminium complements the front baffle; an aluminium base elevates the speaker from the floor; and a detachable front grille is included for flexible appearances.


    In other words: Our vision is not to make another traditional loudspeaker, but to have it be a unique and fully satisfying experience against the backdrop of our roots and core values. Thus ZENSOR 7 is capable of reproducing the finest details from a stereo signal and serving as the truly powerful speaker - by itself or as forceful front speaker in a surround set up.


    We give you: DALI ZENSOR 7 - power and detail, when you need it.


    Dali Speakers
    $1,195.00
    Dali Zensor 7 Walnut - Pair Buy Now
  • Dali Zensor 1 Speakers - White Dali Zensor 1 Speakers - White Quick View

    $395.00
    Buy Now
    x

    Dali Zensor 1 Speakers - White

    What



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    You know a company's on to a winner when the biggest criticism we can level at its speakers is that the grilles could be a bit easier to put on and take off...

    - What HiFi


    Making sense! That's what ZENSOR 1 is up to, packing as much legacy and music as possible into a slim and compact bookshelf speaker cabinet that you can carry home under your arm.


    The versatile ZENSOR 1 is ideal as all-round stereo loudspeaker preferably in small to medium sized rooms. It even works excellently as front speaker in a 2.1 surround set-up or as back speaker in 5.1 systems including subwoofer, as the distinguished and discreet sound resource it is.


    Distinguished by it well-known DALI signatures such as the light and yet stiff wood fibre cones delivering a highly dynamic, detailed, and undisturbed sound reproduction, while ultra-low mass dome tweeter material ensures a widely extended frequency range.


    Discreet by its dimensions (H: 27.4 x W: 16.2 x D: 22 cm), 6-litre cabinet, and its design dressed in a high-gloss lacquer front baffle that blends perfectly into a modern day interior.


    The soundproof design ideas of DALI provide the background for ZENSOR 1, created in respect and admiration of music. From the overall and basic properties to any detail such as the integrated wall bracket, rounded edges, and rear-mounted bass reflex port.


    ZENSOR 1 simply succeeds in converting amplifier power into pure acoustical energy without loss or limitations, and it will give pleasure to your ears and eyes over and over with focused, coherent sound and a stylish, visual identity.


    Dali Speakers
    $395.00
    Dali Zensor 1 White - Pair Buy Now
  • Dali Zensor 1 Speakers - Walnut Dali Zensor 1 Speakers - Walnut Quick View

    $395.00
    Buy Now
    x

    Dali Zensor 1 Speakers - Walnut

    What



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    You know a company's on to a winner when the biggest criticism we can level at its speakers is that the grilles could be a bit easier to put on and take off...

    - What HiFi


    Making sense! That's what ZENSOR 1 is up to, packing as much legacy and music as possible into a slim and compact bookshelf speaker cabinet that you can carry home under your arm.


    The versatile ZENSOR 1 is ideal as all-round stereo loudspeaker preferably in small to medium sized rooms. It even works excellently as front speaker in a 2.1 surround set-up or as back speaker in 5.1 systems including subwoofer, as the distinguished and discreet sound resource it is.


    Distinguished by it well-known DALI signatures such as the light and yet stiff wood fibre cones delivering a highly dynamic, detailed, and undisturbed sound reproduction, while ultra-low mass dome tweeter material ensures a widely extended frequency range.


    Discreet by its dimensions (H: 27.4 x W: 16.2 x D: 22 cm), 6-litre cabinet, and its design dressed in a high-gloss lacquer front baffle that blends perfectly into a modern day interior.


    The soundproof design ideas of DALI provide the background for ZENSOR 1, created in respect and admiration of music. From the overall and basic properties to any detail such as the integrated wall bracket, rounded edges, and rear-mounted bass reflex port.


    ZENSOR 1 simply succeeds in converting amplifier power into pure acoustical energy without loss or limitations, and it will give pleasure to your ears and eyes over and over with focused, coherent sound and a stylish, visual identity.


    Dali Speakers
    $395.00
    Dali Zensor 1 Walnut - Pair Buy Now
  • Dali Zensor 1 Speakers - Black Dali Zensor 1 Speakers - Black Quick View

    $395.00
    Buy Now
    x

    Dali Zensor 1 Speakers - Black

    What



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    You know a company's on to a winner when the biggest criticism we can level at its speakers is that the grilles could be a bit easier to put on and take off...

    - What HiFi


    Making sense! That's what ZENSOR 1 is up to, packing as much legacy and music as possible into a slim and compact bookshelf speaker cabinet that you can carry home under your arm.


    The versatile ZENSOR 1 is ideal as all-round stereo loudspeaker preferably in small to medium sized rooms. It even works excellently as front speaker in a 2.1 surround set-up or as back speaker in 5.1 systems including subwoofer, as the distinguished and discreet sound resource it is.


    Distinguished by it well-known DALI signatures such as the light and yet stiff wood fibre cones delivering a highly dynamic, detailed, and undisturbed sound reproduction, while ultra-low mass dome tweeter material ensures a widely extended frequency range.


    Discreet by its dimensions (H: 27.4 x W: 16.2 x D: 22 cm), 6-litre cabinet, and its design dressed in a high-gloss lacquer front baffle that blends perfectly into a modern day interior.


    The soundproof design ideas of DALI provide the background for ZENSOR 1, created in respect and admiration of music. From the overall and basic properties to any detail such as the integrated wall bracket, rounded edges, and rear-mounted bass reflex port.


    ZENSOR 1 simply succeeds in converting amplifier power into pure acoustical energy without loss or limitations, and it will give pleasure to your ears and eyes over and over with focused, coherent sound and a stylish, visual identity.


    Dali Speakers
    $395.00
    Dali Zensor 1 Black - Pair Buy Now
  • AudioQuest K2 Speaker Cable MULTIPLE LENGTHS AVAILABLE AudioQuest K2 Speaker Cable Quick View

    $6,100.00
    Buy Now
    x

    AudioQuest K2 Speaker Cable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Full Range Termination with Banana (Silver) Plug*


    Custom Lengths Available Upon Request


    At the peak of AudioQuest's Flat Rock series sits K2. Just like the mountaintop, from this vantage point there are very few options to look up toward. K2 combines Solid Perfect-Surface Silver Conductors with DBS and AudioQuest's most successful Double Star-Quad Geometry. K2 will lift the sound of your system to near tropospheric heights.


    SOLID 100% PERFECT-SURFACE SILVER (PSS) CONDUCTORS: Solid conductors prevent strand interaction, a major source of cable distortion. Extremely high-purity Perfect-Surface Silver minimizes distortion caused by grain boundaries that exist within any metal conductor, eliminating harshness and greatly increasing clarity compared to all other conducting materials.


    CARBON-BASED NOISE-DISSIPATION (INSULATION): The negative conductors in K2 are insulated with partially conductive Carbon-Loaded Polyethylene. This remarkable material damps radio-frequency garbage from being fed back into the amplifier. The sonic benefit is exactly the same reduction in "hash" and better dimensionality that comes whenever RF garbage is reduced in an audio circuit. K2 uses Foamed-Polyethylene Insulation on its positive conductors because air absorbs next to no energy, and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.


    DIELECTRIC-BIAS SYSTEM (DBS, US Pat #s 7,126,055 & 7,872,195 B1): All insulation slows down the signal on the conductor inside. When insulation is unbiased, it slows down parts of the signal differently, a big problem for very time-sensitive multi-octave audio. AudioQuest's DBS creates a strong, stable electrostatic field which saturates and polarizes (organizes) the molecules of the insulation. This minimizes both energy storage in the insulation and the multiple nonlinear time-delays that occur. Sound appears from a surprisingly black background with unexpected detail and dynamic contrast. The DBS battery packs will last for years. A test button and LED allow for the occasional battery check.


    DOUBLE STAR-QUAD GEOMETRY: The relationship between conductors defines a cable's most basic electrical values (capacitance and inductance). However, even when those variables are kept in a reasonable balance, the relationship between conductors can be varied in ways that greatly affect the sound. The Double Star-Quad construction of K2 allows for significantly better dynamic contrast and information intelligibility than if the same conductors were run in parallel.


    SPREAD-SPECTRUM TECHNOLOGY (SST): Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid or tubular) have the fewest discontinuities, any conductor of a particular size does have a sonic signature. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different size conductors. The different SST-determined conductor sizes used in K2 allow an exceptionally clear, clean and dynamic sound.


    *Different Terminations & Multi-Spade Plug Option Available Upon Request


    AudioQuest
    $6,100.00
    Prepared Speaker Cable (Pair) - Multiple Lengths Available
    Buy Now
  • AudioQuest Oak Speaker Cable MULTIPLE LENGTHS AVAILABLE AudioQuest Oak Speaker Cable Quick View

    $1,640.00
    Buy Now
    x

    AudioQuest Oak Speaker Cable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Full Range Termination with Banana (Silver) Plug*


    Custom Lengths Available Upon Request


    The mighty Oak is known for its strength and endurance, which are also qualities found in this speaker cable.


    SOLID PERFECT-SURFACE COPPER+ (PSC+) CONDUCTORS: Oak uses extremely high-purity Perfect-Surface Copper+ Conductors. All conductors are solid, which prevents strand interaction, a major source of distortion. Surface quality is critical because a conductor can be considered as a rail-guide for both the electric fields within a conductor, and for the magnetic fields outside the conductor. The astonishingly smooth and pure Perfect-Surface eliminates harshness and greatly increases clarity compared to OFHC, OCC, 8N and other coppers. The superior purity of PSC+ further minimizes distortion caused by grain boundaries, which exist within any metal conductor.


    CARBON-BASED MULTI-LAYER NOISE-DISSIPATION and CROSS-TALK-DISSIPATION SYSTEM (INSULATION): The negative conductors in Oak are insulated with partially conductive Carbon-Loaded Polyethylene. This remarkable material damps radio-frequency garbage from being fed back into the amplifier. The sonic benefit is exactly the same reduction in "hash" and better dimensionality that comes whenever RF garbage is reduced in an audio circuit. Oak uses Nitrogen-Injected Foamed-Polyethylene Insulation on its positive conductors because air absorbs next to no energy, and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.


    DIELECTRIC-BIAS SYSTEM (DBS, US Pat #s 7,126,055 & 7,872,195 B1): All insulation slows down the signal on the conductor inside. When insulation is unbiased, it slows down parts of the signal differently, a big problem for very time-sensitive multi-octave audio. AudioQuest's DBS creates a strong, stable electrostatic field which saturates and polarizes (organizes) the molecules of the insulation. This minimizes both energy storage in the insulation and the multiple nonlinear time-delays that occur. Sound appears from a surprisingly black background with unexpected detail and dynamic contrast. The DBS battery packs will last for years. A test button and LED allow for the occasional battery check.


    DOUBLE COUNTER-SPIRAL GEOMETRY: Oak and the other AQ "Tree Feature" cables have an inner circular array of positive conductors spiraling in one direction. Around this inner group are the negative conductors, spiraling in the opposite direction. Even while the positive and negative conductors are crossing each other instead of being parallel, the relationship between the positive and negative groups is fixed and non-changing, adhering to one of AudioQuest's most basic design tenets: consistency. The result is an astonishing clarity, like focusing a camera lens you had no idea was so far out of focus.


    SPREAD-SPECTRUM TECHNOLOGY (SST):Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid round or tubular) have the fewest discontinuities, any conductor of a particular size does have a sonic signature. SST uses a precise combination of different size conductors in order to significantly reduce the audibility of these character flaws. The different SST-determined conductor sizes used in Oak allow an exceptionally clear, clean and dynamic sound.


    *Different Terminations & Multi-Spade Plug Option Available Upon Request


    AudioQuest
    $1,640.00
    Prepared Speaker Cable (Pair) - Multiple Lengths Available
    Buy Now
  • AudioQuest Meteor Speaker Cable MULTIPLE LENGTHS AVAILABLE AudioQuest Meteor Speaker Cable Quick View

    $2,500.00
    Buy Now
    x

    AudioQuest Meteor Speaker Cable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Full Range Termination with Banana (Silver) Plug*


    Custom Lengths Available Upon Request



    • Metal: Solid 4 x PSS / 4 x PSC+

    • Gauge: 12 AWG

    • Geometry: Double Star-Quad

    • Dielectric: Foamed-Polyethylene (For All Positive Conductors)

    • Noise-Dissipation System: Multi-Layer Carbon-Based Noise- and Crosstalk-Dissipation System

    • Jacket: Black/Dark Gray Braid

    • Terminations: Full-Range

    • Standard Plug: Banana (Silver)



    *Different Terminations & Multi-Spade Plug Option Available Upon Request


    AudioQuest
    $2,500.00
    Prepared Speaker Cable (Pair) - Multiple Lengths Available
    Buy Now
Go to top